Top Router Pivot Pin

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock

Rockler Ellipse Router Circle Cutting Jig – Easy to Use Circle Router Jig to Make Picture Frames Mirrors - Plunge Router Jig Includes Jig Arm Two Dovetail Keys and More

  • Router Circle Jig: The Rockler ellipse circle cutting jig helps you easily create perfect circles, ellipses, and sweeping arcs with your mid-size or....
  • Fit With Most Routers: Our router sign making jig can be drilled to fit most routers with a 6” base. With your router and this handy, easy-to-use....
  • Easy To Use: Setting up the wood cutting jig takes only a couple of minutes and is virtually math-free. Using this jig is so easy, as you move the....
  • 52” Cutting Diameter: The circle jig has a single pivot can be locked to make circles up to 52" diameter (Minimum circle diameter 9-1/4"). Our....
  • What’s Included? This Rockler router circle and ellipse jig includes jig arm, jig base, two dovetail keys, and two locking pivots. Pre-drilled for....
Check Stock

Alamic Door Pivot Hinges Heavy Duty Hinges for Doors Stainless Steel Pivot Door Hinge System

  • Alamic door pivot hinge is able to support much heavier doors than the typical butt hinges..
  • Top pivot with retractable pin, for easy installation. Bottom pivot with sphere. For door weights of up to 250 lbs. The floor bears the full weight of the door rather than door hinge..
  • They are supported by the bottom arm and the floor instead of the door frame which reduces the stress on the frame..
  • This door pivot hinge can 360 degree rotation, widely use in bedroom, livingroom, mansion, tall building rotary door and so on..
  • NOTE: This item does NOT come with mounting screws..
Check Stock

BOSCH RA1054 Deluxe Router Edge Guide with Dust Extraction Hood & Vacuum Hose Adapter , Black

  • ADAPTABILITY: The router guide quickly and easily converts into circle guide for making arcs and circles up to 32 inch in diameter.
  • MULTI USE: For use with most Bosch routers, the guides cut along the work piece or up to 8 inches in from edge.
  • you’ll also have the freedom to do edge forming using non piloted bits.
  • ACCURATE: Precision fine-adjustment control for accuracy.
  • FUNCTIONAL: Keep work area clean with dust collection accessories.
  • KIT CONTENTS: Includes router guide, pivot plate, dust extraction hood, vacuum hose adapter, attachment hardware.
Check Stock

Jasper 240 PRO Circle Cutter Router Jig - Router Circle Cutting Jig Cuts Perfect Circles from 1” to 18 3/16” D - Circle Cutting Jig Includes Calibration Disc, Pivot Pins & Fits Most Popular Routers

  • : The Jasper 240 Pro circle cutter guide allows you to cut 276 different-sized, precise, perfect circles from 1” to 18 3/16” D.
  • : The 240 Pro circle cutter router jig is made from high-quality, construction grade polycarbonate and, with registration, is guaranteed for life..
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths..
  • : Includes all hardware and mounts quickly to fit over 47 different models of plunge routers from popular brands like PORTER CABLE, BOSCH, DEWALT, MAKITA, RIGID, and many more..
  • : The router circle cutting jig guide is perfect for speaker makers especially, woodworkers, and DIYers. This allows the users to get fast and perfect useful circles at every use.
Check Stock

DCT Universal Router Table Saw Insert Base Plate Kit 3-7/8 2-5/8 1-1/4 Inches – Cutter & Porter-Cable Template Guide

  • BUILD A TABLE-MOUNTED ROUTER: The DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4” Inches – Cutter & Porter-Cable....
  • FITS MOST CUTTERS: 3/8-inch thick (1cm) phenolic router plate supports any router with removable baseplate.
  • 3 snap out bit ring openings 3-7/8 inches....
  • EASY TO INSTALL: 9-inch x 12-inch (22.9cm x 30.5cm) plate with pre-drilled table mounting holes.
  • Includes magnets and adjusting screws for securing....
  • BUILT TO LAST: Constructed from durable phenolic plastic to securely hold any router without flexing or warping when storing your router on (not....
  • CONTENTS: Package includes everything you need to mount your router to a table.
  • (1) router plate, (1) guide pin, (4) magnetic holders, (1) Allen....
Check Stock

Prime-Line N 7534 Bi-Fold Door Hardware Repair Kit – Includes Top and Bottom Brackets, Top and Bottom Pivots and Guide Wheel – Door Repair Kit for 1\ to 1-3/8” Thick Doors Up To 50 Lbs.

  • Includes one Prime-Line part N 6543 jamb and floor mount pivot bracket, which is a steel base with an adjustable self-lubricating plastic bushing.
  • One Prime-Line part N 6673 bottom pivot, the 3/8 in. diameter plastic base houses a grooved pivot tip that screws in or out for adjustment.
  • One spring-loaded 7/8 in. diameter N 6703 top roller guide, 3/8 in. plastic base, used with 1 in. 1-3/8 in. thick doors (Kenna Frame).
  • One spring-loaded 1/4 in. diameter Prime-Line part N 6700 top pivot, 3/8 in. plastic base, typically used by Alliance and a variety of other bi-fold manufacturers.
  • One spring-loaded Prime-Line part N-6672 bi-fold closet door top plastic pivot with 3/8 in. diameter pivot and base.
  • 1 Prime-Line part N 6606 top pivot bracket for Acme 2900 series Bi-Fold doors (fastens to top track and fits a 1/4 in. spring-loaded pivot pin).
Check Stock

KASCLINO Circle Cutting Jig for Plunge Router, High Accuracy Groove Milling Circle Cutting Jig for Making Speaker Cutouts Cut Circles for Woodworking Tool(Yellow)

  • High Accuracy: Accurate-drilled pivot holes keep pins in selected holes. Size(L x W x H): about 328 x 167 x 5 mm.
  • Feature: Easily read scale is calibrated for router bit. Easy to install: Mounts directly to the base of different models of plunge routers..
  • With Holes: Cuts different circles in diameter, universal for most trimmers!.
  • Make easy precision cuts for your inlay and recess needs..
  • Precision-drilled pivot holes keep pins in selected holes..
Check Stock

QWORK T-Track Hold Down Clamp Kit, 4 Pcs M6 T Track Clamps Compatible with 3018-PRO/3018-MX3/3018-PROVer CNC Router Machine

  • Next Generation MATCHFIT Dovetail Clamps with 8.5" capacity, Anti-Pivot Technology, and X-Pad Accessory.
  • Dynamic X-Pad Accessory gives your 2-in-1 hold down and inline clamping pressure.
  • Anti-Pivot technology keeps the clamp arm in place when switching out work and doesn't get in the way.
  • 8.5" length and clamping capacity for your bigger projects.
  • Route your own clamp tracks with a standard 14° x 1/2" dovetail router bit and build jigs like never before.
Check Stock

Heavy Duty Pivot Door Hinges - Hidden Door Pivot Hinge System for 360 Degree Rotation Door, Stainless Steel Up Down Shaft Hinges Set

  • STRONG LOAD-BEARING – Unique design structure of up and down link，the door is supported by the bottom arm and the floor rather than door hinge, pivot hinge is able to support much heavier doors than the typical butt hinges,weighting up to 110lbs/50kg.
  • DURABLE MATERIAL - Heavy duty pivot hinge is made of high-quality thick stainless steel, the hinge surface is polish treated and fine workmanship, it has excellent rust and corrosion resistance, strong and durable.
  • WIDELY USE – The door pivot hinge can 360 degree rotation and hidden installation, it suitable for hidden doors, rotary doors, cabinet doors, wooden doors, metal doors, widely use in bedroom, kitchen, basement and so on.
  • EASY TO INSTALLATION – The pivot hinge set contain all the mounting screwing, top pivot with retractable pin for easy to installation.
  • 100% SATISFIED - No reason to return. If you are not satisfied with your product for any reason, just contact us and we will replace the product or refund your order. Our team is always at your service.
Check Stock

O SKOOL Precision Aluminum Router Table Insert Plate Router Templates With Pre-Drilled Adapt to Multiple Routers of Different Models

  • [Contents]: Package includes (1) router plate, (1) start pin, (5) insert ring, (1) 3mm Allen wrench hex key, (1) 4mm Allen wrench hex key, (4) hex....
  • [Adjust Balance]: Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes....
  • [Pre-drilled]: This aluminum router plate come with pre-drilled to fit multiple models of routers..
  • [Simple to Use]: The plate is equipped 5 versions of insert rings that allow you to easily change the size of the opening around the router bit. The....
  • [High Durability]: The dimensions of the plate is 9-1/4" x 11-3/4" x 3/8", and the plate is made of high-quality aluminum alloy, with good wear....
Check Stock

Johnson Hardware 1500 Soft Close Series Commercial Grade Pocket Door Frame for 2x4 Stud Wall (32 inch x 80 inch)

  • Nice Performance: you can use the bifold door hardware kit to replace missing or broken hardware, in order to restore the double folding closet door system to get nice performance.
  • Useful Tools: this sliding closet door hardware kit can bring replaceable parts to your broken bi-fold door, and it can also be applied to install, repair or replace the hardware of the bi-fold door.
  • Appropriate Dimension: the outer diameter of the roller guide of the bifold door roller measures approx. 7/8 inch, and the rotation is very stable, so you can use it with confidence.
  • Wide Range of Uses: the pivot pin of these folding door parts is about 1/4 inch, which is suitable for 1 inch to 1-3/8 inch thick doors, and there are spring loaded, very convenient to use these tools.
  • Practical Design: the bottom pivot and adjustable steel pivot screw has a recessed tapered pivot head that can be fitted into a jamb or floor stand, providing more convenience for you.
Check Stock