Top Router Product Dimensions

Ubiquiti Networks 802.11N Wireless Router Hp (AIRROUTER-HP(US))

  • Package Dimensions :21.59 Cm L X18.796 Cm W X8.636 Cm H.
Check Stock

WatchGuard

  • Package dimensions: 13.462 cmsLx54.356 cmsWx56.642 cmsH.
Check Stock

Makita 193379-7 Router Dust Nozzle (RD/RF/RP 1100/1101 Series)

  • Fits Makita Routers #Rd/Rf/Rp 1100/1101 Series.
  • Package Dimensions: 17.78 L X 4.572 H X 6.858 W (Centimeters).
Check Stock

O SKOOL Precision Aluminum Router Table Insert Plate Router Templates With Pre-Drilled Adapt to Multiple Routers of Different Models

  • [Contents]: Package includes (1) router plate, (1) start pin, (5) insert ring, (1) 3mm Allen wrench hex key, (1) 4mm Allen wrench hex key, (4) hex....
  • [Adjust Balance]: Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes....
  • [Pre-drilled]: This aluminum router plate come with pre-drilled to fit multiple models of routers..
  • [Simple to Use]: The plate is equipped 5 versions of insert rings that allow you to easily change the size of the opening around the router bit. The....
  • [High Durability]: The dimensions of the plate is 9-1/4" x 11-3/4" x 3/8", and the plate is made of high-quality aluminum alloy, with good wear....
Check Stock

CNC Engraving Machine Dust Shoe For 70mm Spindle

  • Spindle diameter: 70mm / 2.75inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router....
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

POWERTEC 71538 Full Size Router Bit Guard Kit w/Mounting Hardware

  • INCLUDES: (1) Router Table Bit Guard, (2) Round Knobs, (2) T-Bolts and Spacers.
  • FUNCTION: This safety device mounts seamlessly to the router table fence, providing your fingers with a premium level of protection from spinning bits.
  • VERSATILE: Can mount into a 1/2” t-slot, any t-tracks that accepts t-bolts, plus it’s vertically adjustable for an assortment of router fences, and can be used with older router tables or as a replacement for lost or broken OEM bit guards.
  • SEE THE RESULTS: Made with our exclusive Blue-Tint acrylic, this woodworking tool offers a sturdy .125” thickness with a semi-transparent profile so that you have exceptional “see-thru” visibility while you work.
  • DIMENSIONS: Overall size: 4-15/16” long x 2-15/16” high.
Check Stock

CNC Engraving Machine Dust Shoe For 85mm Spindle

  • Spindle diameter: 85mm / 3.35inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router before choosing..
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

CNC Engraving Machine Dust Shoe For 100mm Spindle

  • Spindle diameter: 100mm / 3.94inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router before choosing..
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

MPOWER CRB7 Combination Router Jig Mk3 *MEGA BUNDLE* 9 Separate Functions – Including Large and Small Circle Cutting Jig – Multifunctional Router Guide for Routers for Woodworking

  • ...orking router is the Parallel Edge Guide. The usual design of the edge guide is large, cumbersome, time consuming to set up and has a disappointingly small range to penetrate in-board from the edge. However, the CRB7 Edge Guide is a considerable time saver when batch routing many boards with the same dado or groove dimensions..
  • 4. Mortise Hinge Lock and Flute Jig : A pair of micro adjustable precision machined jaws.
  • these sit either side of the work piece re-establishing a safer level of surface contact between router and work piece. Allowing accurate Mortise or Hinge and Lock Rebates or flutes to be machined. Work mortise length with uninterrupted “Sight lines”. Cut centred and off centred mortises. Cut hinge and lock rebates. Repeat cut sets of flutes. Edge Mould Parallel to edge groove or channelling..
  • 5. Offset Router Base Plate. 6 Anti Tilt Router Support. 7 Adjustable Mortising. 8 False Panel Rebate Copier. 9 Adjustable Straight Edge Clamp Guide. 10 EDGE AND DOWEL TRIM KIT Creating a stable router platform, maintaining a consistent cutter height and Increasing routing pass speed with the Tracer Racer Bearing..
Check Stock

ONEIDA AIR SYSTEMS Universal Dust-Free Router Hood

  • ...TERS: Before purchasing, please check the compatibility list (in the photos to the left and in the description below) to verify that the Universal Router Hood will fit your router. Fits models from Black & Decker, Bosch, Craftsman, Dewalt, Hitachi, Makita, Milwaukee, Porter Cable, Rockwell, Ridgid, Ryobi, and more..
  • DIMENSIONS: 1.25” I.D. / 1.5” O.D. swiveling hose connection with quick-release lock. Please Note: We do not recommend hoses smaller than 1.5” I.D. as the volume and size of the dust produced by routers can clog smaller collection ports..
Check Stock

BOSCH Router Tool, Colt 1-Horsepower 5.6 Amp Electronic Variable-Speed Palm Router PR20EVS & Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set, Blue

  • Product 1: PR20EVS Colt Palm Router features a 1.0 HorsePower 5.6 amp variable speed motor with speeds from 16,000 to 35,000 rpm.
  • Product 1: Convenient: Provides a straight edge guide to lead router along edges of work piece or up to 3-5/8 inch from edge.
  • The wood router also features an angled cord exit to keep the cord out of the way when working.
  • Product 1: Durable: The rugged aluminum fixed base of the wood router is durable, solid and precise.
  • The PR20EVS features unique finger support pockets for additional stability, especially when trimming edges.
  • Product 1: Precision: The fast and precise depth adjustment system allows both macro and micro adjustment while the quick clamp system allows motor to be easily adjusted or moved from base to base.
  • Product 2: Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heat.
  • Product 2: Hardened solid alloy steel main construction with power coating finish for durability and longevity.
  • Product 2: Enclosed bearing roller for smooth and aligned operations with 1/4 inch universal shank fits all models of routers.
  • Product 2: Comes with wooden index case for easy storage and organization.
Check Stock

Bosch 1617EVS 2.25 HP Electronic Fixed-Base Router & Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set

  • Product 1: 12 Amp router motor - Combines ample power with adjustable speed settings, allowing users to glide along cutlines.
  • Product 1: Adjustable speed dial (8000-25,000 RPM).2 inch sub-base opening.
  • Product 1: Fixed base has threaded holes for mounting to router table positioned in common 3-hole pattern.
  • Product 1: Now includes RA1161 fixed-base with system for adjusting bit height from above a router table.
  • Product 2: Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heat.
  • Product 2: Hardened solid alloy steel main construction with power coating finish for durability and longevity.
  • Product 2: Enclosed bearing roller for smooth and aligned operations with 1/4 inch universal shank fits all models of routers.
  • Product 2: Comes with wooden index case for easy storage and organization.
Check Stock