Top Router Sled

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Woodpeckers Basic Slab Flattening Mill Great for DIY Live Edge Slab Tables With Router Sled Slab Clamping Dogs & Rails

  • MAKE YOUR OWN SLAB TABLES: With the Woodpeckers Basic Slab Flattening Mill you can now use your router to flatten slabs right in your own shop faster....
  • NICE CAPACITY: The Basic Slab Flattening Mill capacity is 38” x 57”..
  • INCLUDES: Includes (2) 72" rails, (2) 48" rails, (1) router sled, (4) Slab Clamping Dogs and all assembly hardware. Does not include plywood or MDF....
  • BUILT IN USA: This Woodpeckers product is proudly built in the USA..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

Woodpeckers Extended Slab Flattening Mill Great for DIY Live Edge Slab Tables With Router Sled Slab Clamping Dogs & Rails

  • MAKE YOUR OWN SLAB TABLES: With the Woodpeckers Extended Slab Flattening Mill you can now use your router to flatten slabs right in your own shop....
  • HUGE CAPACITY: The Extended Slab Flattening Mill adds an additional pair of 72" rails that can either replace the cross rails to increase width, or....
  • INCLUDES: Includes (4) 72" rails, (2) 48" rails, (1) router sled, (4) Slab Clamping Dogs and all assembly hardware. Does not include plywood or MDF....
  • BUILT IN USA: This Woodpeckers product is proudly built in the USA..
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to fee....
Check Stock

Slab Jig – Router Sled for Woodworking – Levels Wood Slabs Up to 64 Inches Wide! Portable, Durable, and Easy to Adjust! Great for River Tables and Home Improvement Projects!

  • SAVE TIME AND MONEY ON WOODWORKING – Use a Slab Jig to level your woodworking projects without the high cost of a CNC machine! Cut your wood slabs down to size while saving time and money!.
  • COMPATIBLE WITH MOST ROUTERS – Slab Jigs are adjustable to fit most fixed based routers, so you can level out large wood slabs, fast and easy! If you’re looking for a cost-efficient router guide, look no further than a slab flattening jig!.
  • FULLY ADJUSTABLE – Adjust your new router jig to fit a wide variety of table sizes! Easily plane slabs up to 64 inches wide!.
  • BUILT TO LAST – Slab Jigs are built TOUGH! Our router planer rails are made from high-quality machined aluminum, meaning they won’t bend or warp, even after lots of heavy use! Like other products from Stone Coat Countertops, your Slab Jig will last for years to come!.
  • EASY TO ASSEMBLE – Includes all the parts you need to put together your new router planing sled in a matter of minutes! Then, you’ll be ready to work on river tables, plane wood slabs, and so much more!.
Check Stock

Rockler 422866 Router Table Box Joint Jig

  • Fence constructed from MDF with low-friction melamine coating for easy sliding.
  • Precision-machined solid brass indexing keys ensure uniform finger spacing and airtight fit.
  • Cuts 6mm (1/4 Inch), 10 mm (3/8 Inch) and 13 mm (1/2 Inch) box joints on a router table.
  • Smooth-sliding sled features long skis that keep it square to the bit.
  • Ideal for creating coping joints for small and medium boxes and frames.
Check Stock

Woodpeckers Slab Flattening Mill, 2x4 Capacity, Great for DIY Live Edge Slab Tables, With Router Sled, Slab Clamping Dogs & Rails

  • MAKE YOUR OWN SLAB TABLES: With the Woodpeckers 2x2 Slab Flattening Mill you can now use your router to flatten slabs right in your own shop faster and easier that you ever thought possible..
  • WORK CAPACITY: The Slab Flattening Mill, 2x4 Capacity, allows you to handle work up to 24" x 48"..
  • INCLUDES: (2) 64" rails, (2) 33.25" cross rails, (1) router sled, (4) Slab Clamping Dogs and all assembly hardware. Does not include plywood or MDF base.
  • EXTEND IF NEEDED: Extensions available (sold separately).
  • BUILT IN USA: This Woodpeckers product is proudly built in the USA..
Check Stock

Maslow CNC Jumpstart Kit by Maker Made - Includes full Z Axis Control, Router Bit and Pre-made sled

  • This 3-pack includes the Basic Maslow kit PLUS a pre-made sled, and router bit. ** Wood frame NOT included..
  • Bundle also includes a Flash Drive with free software and tons of free projects.
  • Guaranteed compatible with any router that works with the Maslow kit. Bricks not included..
  • This is an open source CNC kit designed to let you make big beautiful things for yourself and others. It’s designed for those who enjoy the process of getting a new tool setup, just as much as the finished build..
  • At MakerMade, we’re 100% committed to the customer and maker community above all else. We pride ourselves on our service. If you ever have any issues with your purchase, let us know, and we’ll make it right..
Check Stock

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • ...m and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to allow the sled to slide as desired..
  • The Miter T-Bar can also be mounted upside down by cutting a dado slot into your sled platform that is the same depth as the T on the Miter T-Bar. The Miter T-Bar will then act much more like a standard solid miter bar. Using this type of flush mount may work better in certain situations when compared to the traditional method..
  • When we decided to start manufacturing aluminum tracks many years ago (well over 20 years), we thought that it was very important to do our best to keep the manufacturing process here i....
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • ...e & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence system is currently a must-have for every family..
Check Stock