Top Router With Above Table Adjustment

Router Lift, Metal Router Lift System Kit for Router Table Saw Insert Base Plate, 4 Jaw Clamping, with Strong Grip

  • DIY ROUTER LIFT TABLE: This lifter base is suitable for making your own router worktable for high precise woodworking, easy to install and operate. NOTE: Only include lift part, not included insert plate! The other parts pictured are for display purposes only and need to be purchased separately (link on the details page below).
  • FIRM CLAMPING: The router lift base adopts 4 jaw clamping way, the clamping is firm and stable, not easy to fall off..
  • WIDE LIFTING RANGE: The base supports lifting height up to 51mm, supports machine diameter is 64mm to 66mm, ideal for small trimming machines..
  • EXCELLENT MATERIALS: Composed of aluminum alloy body and stainless steel support rod, with high strength, rust and corrosion resistance..
  • EASY ADJUSTMENT: Come with crank handle, you can easily and accurately adjust the height of the router bit from above the desktop..
Check Stock

Bosch 12 Amp 2-1/4 HP Variable-Speed 1617EVS with 1/4-Inch and 1/2-Inch Collets

  • POWER: Amongst the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8000-25000 RPM.
  • VERSATILE: The hand router’s variable speed dial allows you to set the optimal speed for the routing task and material.Base Diameter :6 inches Fixed/ 6-11/16 inchesPlunge. Rounded hardwood handles maximize user control.
  • CONSISTENCY: The wood router’s advanced speed-control technology monitors and maintains desired RPM for consistent performance.
  • DURABILITY: Built to last with rugged aluminum base and housing. This Bosch router is backed by a one-year limited warranty, 30-day money-back guarantee, and one-year service protection plan. Case type: hard plastic, fixed-base depth range: 1-5/8 inches, height: 11.625 inches.
  • CONVENIENT: Includes Bosch 1617EVS 2-1/4 HP Variable-Speed Router, RA1161 fixed base, 1/4-inch and 1/2-inch self-releasing collets, drop-forged wrenches, chip shield, above-table height-adjustment wrench, and mounting hardware.
Check Stock

Rockler Pro Lift Router Lift - 9-1/4 x 11-3/4 Large Router Plate – Router Lift Kit For Kreg Jessum Woodpecker & Peachtree - Router Lift Systems w/Router Plate Insert Ring & Set of Hex Keys

  • Router Table Lift: Raise your woodworking to a new level with this pro lift router tool. Our Rockler router lift 9.25” x 11.75” plate is ideal for....
  • Adjust The Height: Use the fine adjustment gear to set the final height to within 0.001''. All this is achieved more quickly, more efficiently, and....
  • Fits Most Routers: This woodworking router table works with router motors with a 4.2'' diameter (13.85'' circumference), like the Porter-Cable 7518....
  • Easy Router Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments—Snap-Lock....
  • What’s Included? Our pro lift includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Router Ring (1-1/2'' I.D.),....
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

SawStop RT-DCB Downdraft Dust Collection Box for Router Lift

  • Compatible with all SawStop Router tablesDescriptionEngineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangable panels for optimum dust port and Vent placement. Plug the 2.25" dust hose from the router fence directly into the dust box's branch inlet, and let the 4" port deliver above and below Table dust from the same port..
Check Stock

Flattening Workbenches and Wide Boards with a Router

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • ...e: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

Bosch 1617EVS 2.25 HP Electronic Fixed-Base Router & Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set

  • Product 1: 12 Amp router motor - Combines ample power with adjustable speed settings, allowing users to glide along cutlines.
  • Product 1: Adjustable speed dial (8000-25,000 RPM).2 inch sub-base opening.
  • Product 1: Fixed base has threaded holes for mounting to router table positioned in common 3-hole pattern.
  • Product 1: Now includes RA1161 fixed-base with system for adjusting bit height from above a router table.
  • Product 2: Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heat.
  • Product 2: Hardened solid alloy steel main construction with power coating finish for durability and longevity.
  • Product 2: Enclosed bearing roller for smooth and aligned operations with 1/4 inch universal shank fits all models of routers.
  • Product 2: Comes with wooden index case for easy storage and organization.
Check Stock

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

POWERTEC 71536 Deluxe Router Table Fence System 3-3/8” Tall 24\ Long

  • Rockler’s Trim Routing Table: The Rockler professional router tables can quickly attach to the edge of a bench, a table, and a piece of plywood or any flat surface. Get more out of your compact router with a rugged, adjustable trim router table that goes anywhere!.
  • Compatibility: Our Router table Rockler is perfect for small applications such as routing round-overs, chamfers, and small dadoes in your shop or at the job site. The wood router tool table is perfect for providing better control of hand held routers..
  • Fits Most Popular Trim Routers: This router tables woodworking is compatible with Bosch Colt, Porter Cable 450 and 7310, DeWalt DW 611, and other popular trim routers – or drill the base to fit your specific router.
  • Easy To Use: Our table mount router sets up quickly, and it's just as easy to detach your router from the table without tools. Use your router tabletop with the included 1/4" thick acrylic base to do freehand work like a standard router..
  • What’s Included? This portable router table includes a high-visibility bit guard, ¼” thick x 5-3/4" diameter acrylic base, fence, T-Knobs let you make quick fence adjustments. This is one of the best router table accessories for your shop!.
Check Stock

Rockler Double Featherboard

  • 4-Piece Wood Router Table Accessory Kit: Get a cleaner shop and safer, more consistent routing with this convenient Rockler router table accessory kit! Our 4-Piece Router Table Accessory Kit includes a dust port & 3 featherboards for more consistent cut quality and to help prevent kickback..
  • 3 Featherboards For Consistent Cut Quality: Two of the router featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the router table and keeps your work against the fence..
  • 2-1/2 Dust Port: Keep your router table clean and dust-free with our router dust port. This router fence dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up..
  • Easy To Use: This miter slot featherboard can be quickly and easily connected to a miter slot openings of 3/8” deep x 3/4" wide or without the need for additional hardware..
  • What’s Included? Our 4-Piece router table accessory kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback..
Check Stock

INCRA Mast-R-Lift-II Router Lift

  • Exclusive INCRA MagnaLOCK reducing ring system (3/8-Inch, 1-Inch, 1-5/8-Inch, 2-5/8-Inch, 3-5/8-Inch) for instant ring changes and perfect ring fit.
  • Change router bits from the top of the table. Quickly make super precise, 0. 001-Inch height adjustments from above.
  • 9-1/4-Inch x 11-3/4-Inch x 3/8-Inch plate size is compatible with all INCRA Router Tables and fits some other brands.
  • Exclusive ball bearing mechanism for super smooth action and low friction.
  • Patented thread tensioning system eliminates vertical lash in the lift mechanism. Ultra-responsive, direct drive 16TPI lift screw mechanism.
Check Stock