Top Router With Usb Port

KuWFi 300Mbps 3G 4G LTE Car WiFi Wireless Router Extender Strong Signal Car WiFi Routers with USB Port SIM Card Slot with External Antennas for USA/Canada/Mexico SIM Card

  • KuWFi WE826-EC25-AF is a 4G LTE Car WiFi Wireless Router that with USB Port & SIM Card Slot & External Antennas. it use for designed for WIFI users to get access to internet via UMTS/HSPA/LTE. provides users with 3G/4G high-speed Internet access. It is used to supply internet access to indoor &outdoor WiFi coverage, can be connected to 32 devices at the same time. The coverage of the signal is 300-500M, which mainly depends on the strength of the signal.
  • Work with USA/Canada/Mexico: The 4g Internet Router Support 3G/4G network band 4G LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71.
  • 3G WCDMA: B2/B4/B5. Support US T-Mobile, AT&T.
  • Support US SIM card (except Verizon Boost Mobile/FreedomPop/Sprint)please you confirm whether your SIM card frequency band is compatible with it before buying a router. you can also use PPPOE dial-up Internet without a SIM card.
  • Multi-Mode 4G Router: with 1*10/100Mbps WAN Port, 4*10/100Mbps LAN Port & USB 2.0 port, support SAMBA, FTP server and DLNA, it is a wireless router can sharing files. Suppor wireless AP, WiFi Router multi operation mode to meet with different requirement. Support VPN and AC Management, Router information contains IMEI code. Open Source OpenWRT for better performance, and the firmware of OS More user-friendly sett....
Check Stock

Peplink Balance 30 Pro | 400Mbps Throughput | Dual-WAN Branch Router | 802.11ac Wi-Fi | Embedded LTE-A Modem | BPL-031-LTEA-W-T

  • 802.11 a/b/g/n Wi Fi 2.4/5 GHz Dual Band with LED Signal Bars.
  • 1 USB Port, 1 Ethernet Port, 1 Wi Fi as a WAN.
  • 4 Operating Modes: 4G LTE/3G USB Wi Fi Router.
  • Supports Open, 802.1x, 64/128-bit WEP, WPA, WPA2, 802.11i.
Check Stock

Grad : Christus Factus Est (5), Lu 655

  • OneMesh Compatible Router- Form a seamless WiFi when work with TP-Link OneMesh WiFi Extenders.
  • Router for wireless internet, works with Alexa, compatible with all Wi-Fi devices, 802.11ac and older.
  • Dual band router upgrades to 1750 Mbps high speed internet(450mbps for 2.4GHz, 1300Mbps for 5GHz), reducing buffering and ideal for 4K streaming.
  • 3 external antennas for long range Wi-Fi. System Requirements-Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other JavaScript-enabled browser. Cable or DSL Modem (if needed).
  • Gigabit Router with 4 Gigabit LAN ports, fast access to multiple connected wired devices, Ideal as a gaming router.
  • Integrated USB port acts as a media Server, easily share your USB drive content.
  • TP-Link tether app easily set up and remotely manage your home network.
  • Works with all internet service providers, such as AT&T, Verizon, Xfinity, Spectrum, RCN, Cox, CenturyLink, Frontier, etc.( a modem is required for most internet service providers).
Check Stock

Centroid 4 axis Acorn DIY CNC motion controller kit REV 4 with CNC software replaces MachMotion,WinCNC,Mach3,EMC2,KCAM4,Smooth Stepper

  • ♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for....
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 /....
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the....
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other....
  • ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
Check Stock

TRENDnet Gigabit Multi-WAN VPN Business Router, TWG-431BR, 5 x Gigabit Ports, 1 x Console Port, QoS, Inter-VLAN Routing, Dynamic Routing, Load-Balancing, High Availability, Online Firmware Updates

  • INTERFACE: 5 x Gigabit ports (Modes:4 WAN ports/1 LAN port or 1 WAN port/4 LAN ports), 1 x USB 3.0 port,1 x RJ-45 console port.
  • GIGABIT MULTI WAN: The router supports up to four separate WAN internet connections to efficiently load-balance traffic by distributing network traffic to the best available link..
  • HIGH AVAILABILITY NETWORK: Group multiple TWG-431BR routers together to create a high availability network with router redundancy to minimize downtime..
  • VPN ROUTER: The VPN router creates an encrypted VPN tunnel to access local area network resources remotely using IPSec, PPTP, L2TP w/ IPsec, and SSL VPN protocols..
  • CONTENT FILTERING: Manage screen time, filter content, track web use and browsing history, as well as device level controls and more. Advanced web content filtering service powered by Router Limits.
  • MANAGEMENT: Supports web browser (HTTP, HTTPS), CLI, SSH and Telnet management.
  • TRENDnet PROTECTION: 3 Year TRENDnet Manufacturer’s Warranty.
Check Stock

Mini 3G / 4G WiFi Router, WLAN Hotspot RJ45 Micro USB Wireless Router Network Card Adapter USB 3G Modems for Most WiFi Device with USB

  • WIRELESS STANDARDS: Support HSDPA/HSUPA/HSPA+, CDMA EVDO Rev A/B USB modem. Including more than 400 kinds of popular USB 3G modems all over the world, dial-up 3G automatically.
  • WIDE APPLICATION: Compatible with Mac, iOS, Android, Windows,Linux operating system. Automatically recognize ADSL/DHCP and WAN/LAN without any preset. Plug and play, no need install any software.
  • HIGH SPEED: This usb wifi router's maximum speed up to 150Mbps, ideal for lag free video streaming and Internet call etc. Ultra-fast wireless adapter speed make you have a worry-free web experience.
  • MINI SIZE: USB port supports mobile phone wireless network card, IOS for data sharing, support U disk or mobile hard diskA. This WiFi router is easy to carry and no space occupation with mini size.
  • STABLE SIGNAL: WAN port: insert the network cable to connect to ADSL modem, wired broadband.
  • LAN port: insert the network cable to connect to the computer. Super signal receiving capability, provide you a better stable Wifi signal experience.
Check Stock

Mikrotik PowerBox 64MB Router 5x10/100 4xPoE-OUT OSL4 Outdoor Case 2W at 24V

  • MikroTik Routerboard hEX PoE RB960PGS 5 Port Gigabit Ethernet Router 128MB.
  • hEX PoE is a five port gigabit ethernet router for locations where wireless connectivity is not required..
  • The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit..
  • It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Etherne.
Check Stock

QVS 10ft SmartSerial to DCE V.35 Serial Cisco Router Cable

  • ❤Console cable❤ :6FT-USB-RS232-RJ45 console cable .It's used for debugging and configuring network equipment ,not ethernet cable.
  • ❤Works for console port❤this USB to rj45 console cable Replaces COM port RS232 (DB-25/DB-9) serial port perfectly, connects to any laptop/PC's USB port directly to a console port like a charm. No more RS232 Female and male adapters。32 and 64 bit operating systems are both support.except Chrome OS.
  • ❤Essential tools for network engineers❤The Cisoc Console Cable It's designed for that a PC or laptop‘s USB port connect to the console port with their Cisco modem, router, firewall, switch or other Serial based Cisco device. Cisco,Juniper,NETGEAR,Ubiquity,LINKSYS,TP-Link ,huawei, H3C, HP, 3com compatibly..
  • ❤The pinout names❤Cisco usb console cable USB2.0 (1.1 compatible).
  • CONSOLE's DTE Pinouts: RTS(1), DTR(2), TXD (3), GND(4), GND(5), RXD (6), DSR(7), CTS(8).
  • the RJ45 pinout names is 1-CTS, 2-DSR, 3-RXD, 4-GND, 5-GND, 6-TXD, 7-DTR, 8-RTS. Cable length 1.8m/6ft, Maximum RS232 speed 500kbaud.
  • ❤LIFETIME CUSTOMER SUPPORT❤beside get 1pack *6ft cisco usb to console,you also back with 180-day no reason free return and refund and 24-hour online service..
Check Stock

CableCreation USB 3.0 to 2.5 Gigabit LAN Ethernet Cable Adapter, USB to Network up to 2.5Gbps Compatible with MacBook, Chromebook, Windows 10, 8.1, Mac OS X 10.6-10.15, Black

  • 【Connectivity】Super Speed USB 3.0 Male A to 2.5G RJ45 Female Ethernet adapter connects your computer, Raspberry Pi 3 or tablet to a router, modem or network switch for network connection. It adds a standard RJ45 port to your Ultrabook, notebook or Macbook for file transferring, video conferencing, gaming, and HD video streaming..
  • 【Upgrade your existing Ethernet port】 CableCreation USB 3.0 to 2. 5Gbps Ethernet adapter is an easy to use solution to quickly upgrade your current RJ-45 LAN port to 2. 5Gbps. ★ Meet the requirements to get 2.5G Ethernet: 1), downloaded the drivers from Realtek offical site (chip: RTL8156).
  • 2), check if your Network card and your Router can support 2.5G Ethernet or not.
  • 3), make sure to connect Cat 6 or above lan cable to the Router..
  • 【Capacity】Supports 10M / 100M / 1000M (1G) / 2500M (2.5G) bandwidth, twisted pair crossover detection and auto-correction (auto MDIX).
  • support WOL (Wake-On-LAN), Full Duplex flow (FDX) (10M/100M/1G/2.5G Rate), auto-negotiation and back pressure routing. Backwards compatible with USB 1.0, USB 1.1, USB bus powered, no external power supply required..
  • 【Compatibility】 Built-in with Realtek IC chip, drivers needed before get it to work, plug and play after one time driver installatio....
Check Stock

Home: from the #1 bestselling creator of the hit Netflix series The Stranger (Myron Bolitar)

  • OneMesh Compatible Router- Form a seamless WiFi when work with TP-Link OneMesh WiFi Extenders.
  • Router for wireless internet, works with Alexa, compatible with all Wi-Fi devices, 802.11ac and older.
  • Dual band router upgrades to 1750 Mbps high speed internet(450mbps for 2.4GHz, 1300Mbps for 5GHz), reducing buffering and ideal for 4K streaming.
  • 3 external antennas for long range Wi-Fi. System Requirements-Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other JavaScript-enabled browser. Cable or DSL Modem (if needed).
  • Gigabit Router with 4 Gigabit LAN ports, fast access to multiple connected wired devices, Ideal as a gaming router.
  • Integrated USB port acts as a media Server, easily share your USB drive content.
  • TP-Link tether app easily set up and remotely manage your home network.
  • Works with all internet service providers, such as AT&T, Verizon, Xfinity, Spectrum, RCN, Cox, CenturyLink, Frontier, etc.( a modem is required for most internet service providers).
Check Stock

CNCTOPBAOS 3 Axis Desktop DIY Mini CNC 3018 Router Kit GRBL Control Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine Working Area 30x18x4.5cm

  • According to the instructions,the machine is easy to assemble..
  • ♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • Nema17 stepper motor 1.3A/0.25N.m/42x42x34mm.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change ....
Check Stock

CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine

  • ♞【Upgrade Version 3018 Pro with Offline Controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • you can operate this machine without connect the computer.
  • offline controller included a SD card reader to write into the root directory G-code files or NC file.
  • Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
  • ♞【Main Feature】 Working area:30x18x4.5cm.
  • Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copp....
Check Stock