Top Rubber Fuel Oil Hose

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

uxcell 2pcs Lubricating Oil Hose 3mm(1/8-inch) ID x 5mm(3/16-inch) OD 3.3ft Water Tube Black Rubber Tubing

  • 【APPLICATION】- Lubricating Line Hose mainly used to transport lubricating oil.
  • 【Advantage】- Lubricating Hose has Oil resistant, wear-resistant, aging resistant, soft, lightweight, good bending performance, smooth appearance.
  • 【FEATURE】- Lubricating Tube Measures 0.12-inches inside diameter by 0.2-inches outside diameter by 3.28-feet total length. 0.04" thin tube wall providing higher flow rates and working pressure.
  • 【Rubber material】- Lubricating Pipe made in Rubber, which has the characteristics of high-temperature resistance, oil resistance..
  • 【Please Note】- The hose can not transport fuel oil on equipment.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Fuel /Oil Pressure Test Kit with Billet Aluminum Fuel /Oil Filter Cap, Fuel Pressure Gauge and Hose Kit for 2003-2007 Ford 6.0L Power Stroke Diesel

  • FITMENT -- 2003-2007 Ford F-Series（F250 F350 F450 F550）, E-Series, Excursion with 6.0L fit for Powerstroke Diesel. Direct-fit replace OEM part number 3C3Z-9G270-BA..
  • MATERIAL -- Made of high quality rubber with reinforced treated, both the inner and outer rubber is design for RMA-A oil resistance and permeability resistance. What’s more, the billet aluminum fuel filter cap is of the highest quality materials, ensures an unparalleled long lifespan..
  • FUNCTION -- Allow for accurate checking of both oil and fuel pressure. The hose has a screw-on fitting that will not leak fuel. This makes it easy to remove the cap after testing, or remove the line and leave cap on the vehicle. The liquid filled gauge and extended hose allow for the operator to drive the vehicle and read the gauge while fuel is under operating pressure..
  • BENEFITS -- Great looks and solid construction make this an outstanding upgrade over the plastic OEM cap..
  • 100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with our Fuel Pressure Test Kit, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock

Heavy-Duty Gas Pressure Washer, 3500PSI at 2.6GPM Power Washer, 50-feet Hose,Portable, Industrial Style，Black

  • 5 quick connect nozzle tips: 0°, 15°, 25°, 45° and soap. Perfect for cleaning cars, yards, garages, walls, trucks and roofs..
  • 13" big tires: We use very good quality pneumatic rubber tires, so you can easily move the washing machine in the garden, making it flat. There are obvious tooth grooves on the outside of the tire. You can rest assured that it will not wear out completely after 2 years of use..
  • 【Tips for you】M22 pressure hose, SAE 10W-30 oil, fuel less than 10% ethanol .All pressure washers are 100% functionally tested at the factory and may contain minimal residual fuel/oil or fuel smell. Please check for sufficient oil (0.2 gallon) every time you use it to ensure the washing machine runs efficiently.This item is non-returnable, if the item arrives damaged or defective, please contact the after-sales address, you can ask for a partial refund or replacement parts..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

Motorcycle Fuel Filter, Fuel Filter CocoMocart Universal 1/4 inch Metal Gasoline Inline Fuel Filters with Magnet for Below 600cc Motorcycles Street Bike

  • 【Not Fading Motorcycle Fuel Filter】Surface anodizing advanced coloring technology increases corrosion resistance and hardness for protect the metal surface..
  • 【Motorcycle Oil Filter Clear Design】Motorcycle inline fuel filter with sealed side transparent glass design keeps clearness..
  • 【Multiple filtration and Magnet adsorption】Fuel filter with multiple stainless steel 304 filter mesh and intense magnet helps to filter impurities, such as scrap ironed. The 304 stainless steel in shell, interface and filter core keeps durable..
  • 【Sealing Ring is High Quality Fluorine Rubber】High quality fluorine rubber improves heat resistance, oxidization resistance, oil resistance, corrosion resistance and atmospheric aging resistance.
  • 【Package includes】1*Metal Fuel Filters,1* fuel line, 4*Hose Clamps.
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

Fuel Transfer Hose, Fuel Hose 3/4\ x 20' (6 m), 3/4 Fuel Hose 20 ft, Fuel Pump Hose 3/4 Inch, for Dispensing Diesel Fuel, Gasoline, Grease, Kerosene, Petroleum Oils - 3/4 Transfer Hose,Farm Fuel Hose

  • 3/4" x 20' (6 m) Fuel Transfer Hose, 3/4 Fuel Hose, Fuel Transfer Pump Replacement Hose. Designed for use with all electric fuel transfer pumps..
  • Farm fuel transfer hose For Dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils..
  • One end of thread is 3/4 In. NPT, the other end is 1-inch NPT. Length 20 ft..
  • This Fuel Transfer Hose 3/4 inch may also know as fuel transfer hose 1 inch,1 inch fuel hose 20 feet, Fuel pump hose,Farm Tank Fuel hose,3/4 Fuel Hose 20 ft,Fuel transfer hose,3 4 Fuel hose,Fuel transfer pump hose,Gas pump hose,Gas transfer hose,Transfer tank hose,Diesel tank hose,Pump hoses,Gasoline pump hose,Farm fuel hose,Diesel transfer hose,Fuel hoses,Diesel fuel line hose,Fuel fill hose,Fill hoses,Oil transfer hose,3/4 Fuel hose,Fuel hose 3/4, 3/4 Fuel transfer hose, 3/4 Hose..
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock