Top Rust Oleum Surface Primer Grey

Rust-Oleum 365930 Floor Coating Base Coat Black Quart

  • Home base coat requires the use of Rust-Oleum home top coat in a semi-gloss or matte finish (Sold separately).
  • For interior use on any bare, stained, sealed or previously coated surfaces such as ceramic tile, porcelain tile, concrete, hard wood, laminate, vinyl and linoleum.
  • Water-Based formula that requires no stripping, sanding or priming.
  • Apply Rust-Oleum home base coat, wait 6 hours, then apply Rust-Oleum home top coat, allow 24 hours following top coat application before walking on floor.
  • Remove caulk and wax from floor before applying coating for best results.
Check Stock

POR-15 Self Etch Primer Spray - Gray - 15 Fl. Oz. - Adheres to Metal & Painted Surfaces | Quick Drying | Easy Application

  • ✅ POR-15 SELF ETCH PRIMER - Is formulated to dry quickly and promote adhesion for the coming layers. Proven to bond incredibly well to all top coats. For a superior layer of protection against rust, apply POR-15 Rust prevention coating following self etch primer spray..
  • ✅ APPLICATION - All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter. Shake well before spraying. Spray two light coats of and allow 10 to 15 minutes between coats. Our Self Etch Primer can be topcoated in 30 minutes..
  • ✅ INCREDIBLE BOND - Our Self Etch Primer is NOT a high-build primer, but it can be sprayed on almost any painted surface and can be top coated in 20 - 30 minutes. It bonds incredibly well to POR-15 Rust Preventive Coating, and all topcoats bond incredibly well to POR-15 Self Etch Primer. It can be sanded lightly, and if desired, multiple coats may be applied..
  • ✅ WHEN DO I NEED THIS? – The etching creates a rougher surface for your topcoat to cling to, much like sanding would accomplish. It adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces. POR-15 Self Etch Primer will help maintain the overall look of your surface while preventing future rust and corrosio....
Check Stock

Krud Kutter 305475 Rust Calcium and Lime Stain Remover, 28 oz, 28 Fl Oz

  • Eliminates tough built-up mineral deposits and rust stains from showers, shower heads, sinks, tubs, toilets and more.
  • Water-based Formula is ideal for removing rust, calcium or lime stains on interior and Exterior surfaces around the house including bathroom, kitchen, garage, patio and more.
  • Safe, fast and effective Remover leaves behind a clean, contaminate Free surface.
Check Stock

Rust-Oleum 203025 M1600 Solvent-Based Precision-Line Inverted Marking Paint Aero, High Vis.Yel - Lot of 12

  • Description: Rust-Oleum M1600 Solvent-Based Precision-Line Inverted Marking Paint Aero, High Vis.Yel.
Check Stock

Rust-Oleum 2395000 High-Performance Striping Line Marking Machine, 9\ x 27.5\

  • Heavy-duty wheels roll smoothly across terrains for fast application.
  • Adjustable design accommodates wide range of applications.
  • Storage section holds extra cans to quickly replace cans or change colors.
  • Perfect for parking lots, roads, paths and more.
  • Use with Rust-Oleum inverted striping paint spray.
  • For Best Results - Use with Rust-Oleum Professional Striping Paint Spray.
Check Stock

Rust-Oleum 210372 Enamel 12-Ounce Spray, Biscuit Appliance Epoxy, Fl Oz (Pack of 1), 12 Ounce

  • Ideal for refinishing exterior metal surfaces including refrigerators, dishwashers, laundry machines and more.
  • Epoxy formula creates an ultra hard, washable surface that withstands everyday wear.
  • Dries to the touch in 2-4 hours and covers approximately 7 sq. ft. per can.
  • Provides a durable surface with an exceptional glossy shine.
  • not for immersed surfaces or items exposed to temperatures over 200F.
  • Superior abrasion and scratch resistance.
  • Provides Rust-Oleum Stops Rust protection.
  • Looks and feels like original appliance finish.
  • This item is not for sale in Catalina Island.
Check Stock

Rust-Oleum 7715830-6PK Stops Rust Bright Coat Metallic Spray Paint, 11 Oz, Aluminum, 6 Pack

  • Rust-Oleum stops rust bright coat metallic finish spray creates a decorative look on a variety of accent pieces.
  • Apply to any interior metal, wood, concrete or masonry surface for a shiny, metallic finish.
  • Dries to the touch or handle in 60 minutes for quick project completion.
  • There is the any-angle spray feature that allows you to spray in any direction, even upside-down.
  • Tough, attractive finish will not fade or dull when used indoors.
Check Stock

Canopus - 3M Scotch Brite Scuff Pads Very Fine and Ultra Fine (5+5)

  • 5Pk Grey Detail Sander + 5pk Red Maroon Scotch Brite pads, Scouring Pads, 3M Sandpaper Equivalent.
  • Load resistant, Performs like steel wool grade 00 without splintering, Ultra fine consistent finish.
  • Excellent general purpose sanding pads for prepping, final finishing and light cleaning, automotive primer, for final sanding of primer-surfacer, does not rust like steel wool.
  • Scotch Brite sponges may be used by hand sander, orbital sander, lathe tools and as boat accessories or auto body tools.
  • Aluminum Oxide, Made of nylon web,Designed for scuffing before applying paint and primer-surfacer like automotive sandpaper.
Check Stock

Gemplers Rust Converter - Quart

  • RESTORES YOUR OLD INVESTMENTS WITH TOTAL EASE – GEMPLER’S Rust Converter stops tools, vehicles, tanks or anything with a rusted steel/iron surface from rusting further by chemically converting the rust into an inert, black protective barrier..
  • WORKS AS BOTH A PRIMER AND RUST CONVERTER– Once painted on, GEMPLER’S Rust Converter functions as a highly effective primer, making the treated surface ready to re-paint with an oil-based paint in just 48 hours..
  • EASY TO APPLY & GOOD COVERAGE– Just use a normal wire brush to remove any loose or layered scale and rust, then apply GEMPLER’S Rust Converter with a regular paint brush or sponge. 1 Quart covers up to 125 sq ft..
  • NO NEED TO SANDBLAST SURFACES – GEMPLER’S Rust Converter removes any need for sandblasting, heavy scraping or grinding down old rusted surfaces prior to use. It’s the fastest and easiest way to convert and restore old rusted surfaces..
  • ECO-FRIENDLY – GEMPLER’S Rust Converter is environmentally safe, non-flammable, and made from an easy clean-up water-based formula..
Check Stock

AGS Rust Solutions Apply Over Rust Converter and Reformer, 1 Quart - Converts Rust to Protective Coating, Stops Rust from Spreading

  • Applies directly over rust, stopping the rust and converting it to a protective polymeric coating.
  • Converted surface acts as primer, sealing out moisture and prevents future rust and corrosion.
  • Topcoat converted surface with primer or paint.
  • 1 Quart will convert 50 to 75 square feet.
Check Stock

TWP/Gemini TWP101-1G TWP Total Wood Preservative, Cedar ~ One Gallon by TWP - Total Wood Preservative

  • This item is a Rust-Oleum 00903 Wood life Classic, 1-Gallon, Clear.
  • Purpose of use for Painting Supplies, household-wood-stains.
  • This product is manufactured in United States.
  • EPA-registered, fungicidal preservative protects against surface mold, mildew, rot and decay.
  • Water repellent resists water damage: swelling, warping, end-checking.
  • 100% clear - reveals natural wood color and allows it to gray naturally.
Check Stock

USC 2K Spray Max Epoxy Primer Paint Aerosol

  • RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
  • The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
  • It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
  • Can be applied directly over surface rust.
Check Stock