Top S1headers Small Block

NEW WEIAND OIL PAN KIT,7 QUARTS,GOLD ZINC,8.25" DEPTH,DRAG RACING,COMPATIBLE WITH 1958-1979 SMALL BLOCK CHEV.

  • Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
  • Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
  • Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

Ice Block Mold Extra Large

  • EXTRA LARGE ICE BLOCK MOLD - Extra large 7 lb ice blocks made at home in your freezer! Block ice lasts significantly longer than small cubed ice. Save money by making ice blocks at home!.
  • MAKE LONGER LASTING ICE - The biggest benefit of using block ice in your cooler vs regular ice cubes is that an ice block will take significantly longer to melt. A 7 lb block of ice will not fit in your glass, but it will remain solid in your cooler for much longer than normal ice cubes..
  • EASY TO USE – Fill with cool water, leave ~½ inch space at the top to allow for thermal expansion, and place in your freezer for 24 hours. Once completely frozen, remove ice mold from the freezer and let sit for 5-10 minutes before removing the ice block from the mold..
  • EASY TO FILL AND MOVE – The reinforced sides prevent the flexible silicone from collapsing under the weight of the water and the top rim reinforcement allows you to lift and carry the filled ice block mold without causing the silicone to deform and spill..
  • EASY TO CLEAN AND REUSE – The Cold Guys Silicone Block Ice Mold can be hand washed an....
Check Stock

Block That Shot: The Bob Chrystal Story

  • EXTRA LARGE ICE BLOCK MOLD - Extra large 7 lb ice blocks made at home in your freezer! Block ice lasts significantly longer than small cubed ice. Save money by making ice blocks at home!.
  • MAKE LONGER LASTING ICE - The biggest benefit of using block ice in your cooler vs regular ice cubes is that an ice block will take significantly longer to melt. A 7 lb block of ice will not fit in your glass, but it will remain solid in your cooler for much longer than normal ice cubes..
  • EASY TO USE – Fill with cool water, leave ~½ inch space at the top to allow for thermal expansion, and place in your freezer for 24 hours. Once completely frozen, remove ice mold from the freezer and let sit for 5-10 minutes before removing the ice block from the mold..
  • EASY TO FILL AND MOVE – The reinforced sides prevent the flexible silicone from collapsing under the weight of the water and the top rim reinforcement allows you to lift and carry the filled ice block mold without causing the silicone to deform and spill..
  • EASY TO CLEAN AND REUSE – The Cold Guys Silicone Block Ice Mold can be hand washed and is also dishwasher safe and can be used over and over again..
  • PERFECT FOR THE BEACH, CAMPING, HUNTING, and FISHING TRIPS – Fill your cooler with block ice and keep your food....
Check Stock

Hezukyp CNC Set 15-500mm 2X Linear Guideway Rail 4X Square Type Carriage Bearing Block

  • For Small Equipment - This linear rail and block are small in size and lightweight, especially suitable for small equipments..
  • Great Design - Adopting 4-point contact design, it can bear load from every direction, and has good strength and high accuracy..
  • Self-Aligning Ability - Designed with ball retainer, which allows interchangeability in the case of small precision..
  • Easy to Grease - Block has lubrication system.
  • lubrication oil can be easily put into the oil inlet on the side..
  • Wide Application - Widely used for automatic equipment, precision measuring equipment, and many other machines that need precision linear movement..
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Mr. Gasket 1183 Cam Button Spacer

  • FITS 1978-86 small block Chevy 200-262 & Chevy 90° V6 and 1955-95 small block Chevy 262-400 (except LT1).
Check Stock

Universal 4 port Vacuum Block ALL SPEC PERFORMANCE FM2692

  • Small vacuum block is great for running up to 4 extra vacuum lines and is small enough to fit almost anywhere.
Check Stock

Ice Pick Hits into Large Block of Ice 8

  • EXTRA LARGE ICE BLOCK MOLD - Extra large 7 lb ice blocks made at home in your freezer! Block ice lasts significantly longer than small cubed ice. Save money by making ice blocks at home!.
  • MAKE LONGER LASTING ICE - The biggest benefit of using block ice in your cooler vs regular ice cubes is that an ice block will take significantly longer to melt. A 7 lb block of ice will not fit in your glass, but it will remain solid in your cooler for much longer than normal ice cubes..
  • EASY TO USE – Fill with cool water, leave ~½ inch space at the top to allow for thermal expansion, and place in your freezer for 24 hours. Once completely frozen, remove ice mold from the freezer and let sit for 5-10 minutes before removing the ice block from the mold..
  • EASY TO FILL AND MOVE – The reinforced sides prevent the flexible silicone from collapsing under the weight of the water and the top rim reinforcement allows you to lift and carry the filled ice block mold without causing the silicone to deform and spill..
  • EASY TO CLEAN AND REUSE – The Cold Guys Silicone Block Ice Mold can be hand washed an....
Check Stock

Ice Pick Hits into Large Block of Ice 7

  • EXTRA LARGE ICE BLOCK MOLD - Extra large 7 lb ice blocks made at home in your freezer! Block ice lasts significantly longer than small cubed ice. Save money by making ice blocks at home!.
  • MAKE LONGER LASTING ICE - The biggest benefit of using block ice in your cooler vs regular ice cubes is that an ice block will take significantly longer to melt. A 7 lb block of ice will not fit in your glass, but it will remain solid in your cooler for much longer than normal ice cubes..
  • EASY TO USE – Fill with cool water, leave ~½ inch space at the top to allow for thermal expansion, and place in your freezer for 24 hours. Once completely frozen, remove ice mold from the freezer and let sit for 5-10 minutes before removing the ice block from the mold..
  • EASY TO FILL AND MOVE – The reinforced sides prevent the flexible silicone from collapsing under the weight of the water and the top rim reinforcement allows you to lift and carry the filled ice block mold without causing the silicone to deform and spill..
  • EASY TO CLEAN AND REUSE – The Cold Guys Silicone Block Ice Mold can be hand washed an....
Check Stock

Ice Pick Hits into Large Block of Ice 6

  • EXTRA LARGE ICE BLOCK MOLD - Extra large 7 lb ice blocks made at home in your freezer! Block ice lasts significantly longer than small cubed ice. Save money by making ice blocks at home!.
  • MAKE LONGER LASTING ICE - The biggest benefit of using block ice in your cooler vs regular ice cubes is that an ice block will take significantly longer to melt. A 7 lb block of ice will not fit in your glass, but it will remain solid in your cooler for much longer than normal ice cubes..
  • EASY TO USE – Fill with cool water, leave ~½ inch space at the top to allow for thermal expansion, and place in your freezer for 24 hours. Once completely frozen, remove ice mold from the freezer and let sit for 5-10 minutes before removing the ice block from the mold..
  • EASY TO FILL AND MOVE – The reinforced sides prevent the flexible silicone from collapsing under the weight of the water and the top rim reinforcement allows you to lift and carry the filled ice block mold without causing the silicone to deform and spill..
  • EASY TO CLEAN AND REUSE – The Cold Guys Silicone Block Ice Mold can be hand washed an....
Check Stock

1958-86 Compatible/Replacement for Chevy Small Block 283-305-327-350-400 Short Steel Valve Covers - Chrome

  • Chevy small block short chrome steel valve covers fit 1958-86 Chevy 283-305-327-350 small block engines..
Check Stock

1958-86 Compatible/Replacement for Chevy Small Block 283-305-327-350-400 Short Steel Valve Covers - Orange

  • Chevy small block short painted orange steel valve covers fit 1958-86 Chevy 283-305-327-350 small block engines..
Check Stock