Top Sae Metric

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

GEARWRENCH 176 Piece ¼”, 3/8”, & ½” Dr. 12 Point Master Socket Set - 89074

  • Set includes 1/4", 3/8", & 1/2" drive 12 point SAE & metric, standard & deep sockets.
  • Bright, full polish chrome finish easily wipes clean and resists corrosion.
  • Off-corner loading design reduces fastener rounding.
  • Chamfered opening quickly guides fasteners into socket.
  • Double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets.
Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool

  • ★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 51pcs America SAE type measuring range is 4-84.
  • 58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the thread blades, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors. Typically used to check the mold & machine & mechanical thread size determination is correct.
  • Accurately measures internal and external screw threads with thread blades of varied size.
  • Center Gauge use to grind and position thread cutting tool on a lathe..
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • ...ial – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

ARES 60141 – 8-Piece Metric & SAE Socket Keeper Socket Organizer Tray Set – Black & Red Socket Holders - Store 176 Standard & Deep Sockets - Socket Posts Feature High Visibility Markings

  • SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*.
  • SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes..
  • DESIGN: These socket organizers make managing sockets simple.
  • each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs for superior organization and mobility, the ½” organizers offer more extensive 1/2” socket st....
Check Stock

826pc Universal O Ring Assortment Kit in 32 Sizes | SAE and Metric O Ring Kit for Plumbing Automotive Faucet Repair More | Nitrile Rubber O Ring Set with 4 Pick & Hook

  • 826PC O-RING SET: This large rubber O-ring set by Orion Motor Tech includes 407 SAE O-rings and 419 metric O-rings in the 32 most needed sizes.
  • SAE O-rings range from -006 to -226 and metric O-rings cover inner diameters from 3 to 50mm and outer diameters from 6 to 57mm.
  • BUILT TO LAST: Each piece of our huge O-ring kit is constructed from top-class nitrile rubber for long-lasting and dependable service, resisting heat, corrosion, and wear.
  • WIDE APPLICATION: This O-ring kit with picks and hooks is designed to meet all your needs when repairing cars, faucets, pipes, hydraulics, pneumatic machines, and more.
  • EASY ORGANIZATION: The separate cases for the SAE and metric sets organize every O-ring into different slots by size, all clearly labeled, for easy use and even easier storage and transport between jobs.
  • SATISFACTION GUARANTEED: Our SAE & metric rubber O-ring assortment kit is backed with Orion Motor Tech's usual strong warranty and friendly customer service to assure you that you'll be able to use this set for years to come.
Check Stock

AZUNO Hydraulic Grease Fittings, 240 Pieces SAE & Metric Grease Fitting Assortment with 120 PCS Grease Fitting Caps (Grease Fittings & Coupler)

  • 【240 Pieces Kit】 Total 240pcs includes 120pcs SAE and 120pcs METRIC. SAE packed with 6 kinds, 1/4” and 1/8” NPT in straight 45° and 90°. METRIC packed with 6 kinds, M6 and M8 NPT in straight 45° and 90° grease zerks..
  • 【Build to Last】Constructed from high-strength zinc-plated steel for extra strength and rust-resistance..
  • 【Tested and Certified】Meet and exceeds ISO/TS16949 certified and industry benchmark 48 Hours corrosion resistance tested..
  • 【Grease Zerk Caps】120pcs red and black grease fitting caps differentiated SAE and Metric fittings. Protect grease fittings from corrosion and contaminants..
  • 【Keep Organized with Durable Case】 Thick polypropylene (PP) case with double snap locks to keep secure of grease zerk assortment..
Check Stock

Ctooltool Universal 42Pcs Thread Chaser Set, Rethread Repair Tool, Fractional and Metric Thread Restorer Kit

  • Contains 7 SAE coarse and fine dies, 6 coarse and fine taps, 6 metric taps and dies, 1 metric file, and 1 SAE rethread file. Rethread Die Sizes - 1/4. 5/16. 3/8. 7/16. 1/2. 9/16. 5/8 - UNC / UNF.
  • Rethreading tools are color- coded for quick visual identification. 6 x 1.00. 8 x 1.25. 10 x 1.25. 10 x 1.50. 12 x 1.25. 12 x 1.5. 12 x 1.75mm.
  • Highly tempered for strength and durability and are hex shaped for use with a socket or wrench Re-Thread Taps - 1/4. 5/16. 3/8. 7/16. 1/2. 9/16 - UNC / UNF.
  • Sizes for All Metric- USS- SAE. 6 x 1.00. 8 x 1.25. 10 x 1.25. 10 x 1.50. 12 x 1.25. 12 x 1.5. 12 x 1.75mm.
  • Packed in Blow Mold Case. Thread File - 11. 12. 13. 14. 15. 16. 18. 20 and 24.
  • Thread File - 9. 10. 12. 16. 20. 27. 28 and 32.
Check Stock

ARES 60178 – 8-Piece Metric & SAE Socket Keeper Socket Organizer Tray Set – Black & Green Socket Holders - Store 176 Standard & Deep Sockets - Socket Posts Feature High Visibility Markings

  • SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*.
  • SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes..
  • DESIGN: These socket organizers make managing sockets simple.
  • each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs ....
Check Stock

HORUSDY 48-Piece Ratcheting Wrench Set, SAE and Metric Ratchet Wrenches , Ratchet Wrench Set Gear With Organizer Pouch

  • Made from heat-treated chrome vanadium steel, with Mirror finish,Slim profile, these wrenches will deliver years of consistent performance..
  • 22 Pieces Ratcheing wrench set with mirror finish includes SAE and metric combination wrenches. This deluxe combo set makes emergency repairs a breeze..
  • 11 Metric + 11 SAE 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″.
  • 26 Piece Allen Wrench Set, Hex Key Set with Long Arm Ball End, 13 Pieces Metric+13 Pieces SAE, 3/64" - 3/8" and 1.27-10mm..
  • Designed with a ball end to access socket cap screws up to a 25° entry angle, allowing easier access to those hard-to-reach places and making it easy for adjusting in all angles..
Check Stock

DURATECH Ratcheting Combination Wrench Set, SAE & Metric, 22-piece, 1/4″ to 3/4″ & 6-18mm, CR-V Steel, with Carrying Bag

  • Wrenches are made from durable chrome vanadium steel, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life. DURATECH 22-Piece ratcheting combination wrench set makes emergency repairs a breeze..
  • 72 teeth perfect precision with slim profile. The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. Top-quality hand tools for every repair project..
  • 22-piece SAE&Metric Ratcheting Combination Wrench Set that meets ANSI standard includes 11METRIC+11SAE unbreakable wrench: Metric 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and SAE 1/4’’, 9/32’’, 5/16’’, 11/32’’, 3/8’’, 7/16’’, 1/2’’, 9/16’’, 5/8’’, 11/16’’, 3/4’’. Standard and metric measurements ensure that you have the right tool to tackle any screw or bolt..
  • Tool roll for convenient storage and taking. The tool roll case has each wrench size printed which makes organizing easy..
  • This comprehensive collection of open-ended and ratchet wrenches is a must-have for your roadside emergency kit. They roll up neatly in an organizer bag for storage in your car trunk or mechanics gear..
Check Stock