Top Samarium Cobalt Alloys

Drill America - DWDCO5/8 5/8\ Reduced Shank Cobalt Drill Bit with 1/2\ Shank, DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

KEO 53519 Cobalt Steel Single-End Countersink Set, TiN Coated, 82 Degree Point Angle, 5/16\ - 1\ Head Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Application: Countersinks And Deburs Aluminum, Non-Metallics And Plastics.
  • Straight shank, CNC precision cam ground, M35 cobalt, chatter-free cutting action.
Check Stock

Drill America - D/ACO43P12 #43 Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Drill America - D/ACO40P12#40 Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Drill America D/ACO30P12 #30 Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Drill America 5/16 Cobalt Stubby Threaded Shank Drill Bit Overall Length 5/8 TSD Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Threaded shank is for use with threaded-spindle tools, often used in aerospace and automotive applications.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Featured with 135 degrees heavy duty split point and surface treated for drilling hard, tough, high tensile strength materials.
Check Stock

Drill America - D/ACO3/8X9/16 9/16\ Cobalt Reduced Shank Drill Bit with 3/8\ Shank, D/ACO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Drill America 33 Piece m35 Cobalt Reduced Shank Drill Bit Set in Wood Case (1/2\ - 1\ x 64ths), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Drill America - D/ASTCO1/4P12 1/4\ Cobalt Heavy Duty Split Point Stub Drill Bit (Pack of 12), D/ASTCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

Michigan Drill 546C Series Cobalt Steel Countersink and Debarring Tool, Ground Finish, Double End, 1/4\ Shank Diameter, 90 Degrees Point, 0 Size

  • Cobalt steel tools with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • It is recommended for debarring steel and other ferrous materials.
Check Stock

Michigan Drill 544C Series Cobalt Steel Countersink and Debarring Tool, Ground Finish, Double End, 1/4\ Shank Diameter, 82 Degrees Point, 0 Size

  • Cobalt steel tools with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • It is recommended for debarring steel and other ferrous materials.
Check Stock