Top Sanding Disc Table Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

  • MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
  • USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
  • NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
  • Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
  • BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
  • PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....
Check Stock

BUCKTOOL 5.0A Belt Disc Sander 4 in x 36 in Belt and 6 in Disc Sander with 3/4HP Direct-drive Motor and Portable Al Base, BD4603 Upgraded Model

  • MAINTENANCE-FREE: This sanding belt and disc were directly driven by the motor shaft, you need not adjust the belt tension, and you don't have to change the damaged belt like before.
  • INCREASE EFFICIENCY: The motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 3/4 HP fully enclosed induction motor, providing quiet but powerful performance.
  • MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding of curved work-pieces, it has a quick sanding belt replacement design & track control function.
  • TWO CAST AL WORKTABLE: Equipped with two cast aluminum workbenches for more convenient sanding, and the sturdy cast aluminum base with rubber foot prevents vibrations, to ensure a better experience, we suggest matching with our Y-Fitting Hose.
  • TWO-IN-ONE SANDING MACHINE: This sander meets CSA standards, two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc, the angle adjustable work table with miter gauge can be used on both sanding disc and belt.
Check Stock

BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo, Bench Knife Sharpener with Large Work Table, Professional Benchtop Belt Sander with Direct-drive 4.8A Brushless Motor for Metalworking, BD1801DS

  • DUAL SPEED DIRECT DRIVEN MOTOR: 4.8A brushless induction motor can provide 1750 & 3450 RPM speeds for your different needs, 25% more sanding efficiency than belt-driven motor.
  • MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work.
  • MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing.
  • EASY BELT DISC CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast. Hoop & loop design sanding disc makes disc replacement super easy and does not need to use glue anymore.
  • MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.
Check Stock

Cutting Discs, Flap Discs, Polishing Discs HSS Circular Saw Blade Set with a Mounting Mandrel 3/8" & 1/4" Arbor Hole for Die Grinder Rotary Tool Cutting Polishing Grinding Metal 21 Pack

  • Components include 10 x cutting discs + 5 x flap discs + 3 x wool felt discs + 2 x HSS circular saw blades + 1 x Mounting Mandrel.
  • Flap disc: it is made of high quality industrial grade blue cubic zirconia for strength, durability and longer life. The 80 grit is coarser and is ideal for heavier removal and sanding..
  • Cutting disc: copyrighted combination of aluminium oxide grit for aggressive cutting. Thin 0.1 cm cutting wheel design for fast cutting..
  • Wool felt disc compressed wool felt, which is environmentally friendly, robust and wear-resistant with a longer service life. Smooth and bright polishing effect, making it suitable for the fine surface..
  • HSS circular saw blade: it is made of strong high speed steel, saw blades are sharp and tidy. New composite anti-wear coating technology, improves surface hardness and blade life..
Check Stock

6' X 48' Belt and 9' Disc Combination Sander with Cast Iron Stand, 80-grit Sanding Belt and 80-grit Sanding Disc; 110V, 8 Amp

  • 2-position table tilts from 0 to 45 degrees.
  • Table can be repositioned for use with belt or disc.
  • Miter gauge (0 to 45 degrees left/right).
  • Includes floor stand, 80-grit sanding belt and 80-grit sanding disc.
Check Stock

Wish You Were Here

  • ⭐UNIVERSAL FIT:Switch 489105-00 On-Off Toggle Switch For Compatible with Delta Table Saw.
  • ⭐REPLACES NUMBE:Compatible with 31-695 Type 2 Sander 31-780 Type 1 Sander SA180 Type 1 Belt/Disc Sander 22-540 Type 1 12 inch Planer 22-560 Type 1 Planer 22-565 Type 1 Planer 28-150 Type 2 Band Saw 23-675 Type 1 Grinder / Finisher 14-650 Type 1 Mortiser LA200 Type 1 Lathe 31-325 Type 1 Grinder/Sander TS300 Type 2 Bench Table Saw TS350 Type 1 Bench Table Saw SH100 Type 1 Bench Shaper AP300 Type 2 Air Collector Management SA180 Type 2 Stationary Sander 34-670 Type 2 10 Inch Table Saw JT360 6".
  • ⭐WORKS FOR BRANDS: Compatible with GR450 Type 1 8" 1 6"Tool-less Quick Change Variable-Speed Grinder TP305 12-1/2" Portable Planer DP300L 12" Crosshair Laser Drill Press 17-900 Type 2 16-1/2" Drill Press 36-600 Type 2 Table Saw 50-075 Type 1 Single Stage Collector 50-665 Type 1 1.5Hp 2 Stg Collector 14-070 Type 1 14" Floor Drill Press DP200 Type 1 10" Drill Press DP400 Type 1 Drill Press GR250 Type 1 6" Bench Grinder with Lamp 46-250 Type 2 Midi-Lathe 36-610 Type 2 Table Saw 36-380 Type 1 Xl-10.
  • ⭐Specifications: Voltage: 125/250V Amperage: 20/12A Terminals: Two,On-Off Toggle Switch replaces Compatible with Delta 489105-00, 1343758 (Optional Lock).On-Off Toggle Switch re....
Check Stock

Arbor Mandrel Adaptor Motor Shaft Coupler Sleeve for Angle Grinder,Drill Converted into Cutting Machine Accessories

  • Angle grinder converted into cutting machine arbor mandrel adaptor accessories.
  • It is suitable for cutting disc, saw blade, polishing tool which inner diameter.
  • This sleeve, installed on the grinding mill can be sanding disc polishing grinding, can also be installed 16MM or 20MM aperture of the slice,....
  • Size: please check the detail illustration.
Check Stock

Freud-Diablo 10' Calibration & Sanding Disk with 5/8' Arbor

Check Stock

ABN Aluminum Oxide Roloc Abrasive Sanding Discs 50-Pack, 2” Inch, 60 Grit – Metal Wheels for Surface Prep and Finishing

  • PREMIUM SANDING DISC SET: Use the ABN 50 Pack Aluminum Oxide Roloc Sanding Disc 2 Inch Grinding Disc Set, 60 Grit, to prep, finish, and polish various materials.
  • High-speed sanding grinds particles and removes target coating and scratches to leave you with a smooth, uniformed surface.
  • 2 inch sanding disc provides the perfect size for tightly-contoured sections or large surface areas.
  • EASILY REMOVE RUST, PAINT, AND OTHER COATINGS: Whether you are using these round sandpaper discs to clean and deburr or to blend, finish, and polish, they will get the job done.
  • These roll lock metal sanding disc tools will help you remove paint, rust, glue, or other stubborn adhesives and materials.
  • BUILT TO LAST: Aluminum oxide abrasive orbital sanding discs are known for their low heat retention, superior cut rate, and durability making them ideal for prepping and finishing soft and hardwoods, chip and fiber boards, plastic, rubber, cork, ferrous and non-ferrous metals, painted surfaces, and other building materials.
  • Aluminum oxide material is bonded with resin to provide resistance to overload when working.
  • FITS YOUR TOOLS: Quickly and easily replace your used grinding discs.
  • Each roll lock drill grinder disk has a unique r-type torque screwed attachment that allows ....
Check Stock

Red Label Abrasives 1 x 30 Inch Knife Sharpening Sanding Belts - 1000, 1200, 1500, 5000 Grits - 4 Pack Assortment

  • You will get: it comes with a total of 10 pieces abrasive sanding belt (2 x 80 grits, 2 x120 grits, 2 x 150 grits , 2 x 240 grits, 2 x 400 grits) and 12 pieces sanding disc (2 x 80 grits, 2 x 100 grits, 2 x 120 grits, 2 x 180 grits, 2 x 240 grits, 2 x 400 grits).
  • Quality materials: our abrasive sanding belt and sanding disc are made from open coat aluminum oxide grain for optimal sanding capacity, delivering quick and long lasting sanding, not easy to break.
  • Multiple function: abrasive sanding belts and sanding disc can be antistatic, washable plus an additive in the resin to resist loading, sanding disc with self adhesive backing and lightweight paper, resin bond for heat resistance.
  • Widely application: it is applicable to furniture, automobiles, yachts and other industries of metal and non metallic materials of various complex surface rust, paint, deburring, solder joints grinding.
  • Practicality: a total of 22 pieces abrasive sanding belt and sand disc assortment from rough to fine to satisfy almost all your general polishing requirements.
Check Stock

Shop Fox W1712-6" x 48" Belt/12" Disc Combo Sander

  • HIGH POWER: The 1.5 HP copper wire induction motor is more powerful and professional than most woodworking machine, providing a belt speed of 1836 feet per minute and a disc speed of 3450 rotations per minute, graphite board ensure the sanding belt smooth running, extend the service life.
  • WITH STURDY STAND: The steel stand keeps sanding surfaces elevated over the ground, and the stand is equipped with wheels and handles for easy movement, the heavy-duty body design provides enough weight to prevent walking and vibration during use.
  • CONVENIENT DESIGN: The tension quick release lever helps you switch and replace sandpaper grits as needed without wasting time. Dust port allows a dust-free operation when connecting with a dust collector. Graphite board ensures the sanding belt running smoothly and extends its service life.
  • MULTI-ANGLE SANDING: The sanding belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your different projects, the spacious sanding disc worktable can be adjusted from 0 to 60 degrees to meet your different angle needs.
Check Stock

LIBAOTML Mini Table Saw for Hobbies - Small Multipurpose Lapidary Rock Saw - Portable Hobby Cutting Machine for DIY Projects - Compact Tabletop Wood Saws for Jewelry Making, Drilling, Crafts

  • ✅ Portable Table Saw: This table saw 3 inch is compact, lightweight, easy to carry everywhere. Declutter your studio bench of bulky woodworking tools and get extra free space for your professional or hobby activities..
  • ✅ Multifunctional Hobby Saw: Our multitool saw allows for versatile use. Assemble the grinding mill or fiber mill to use it as a grinding or polishing machine - or connect it to a flexible shaft or drill chuck for engraving..
  • ✅ Extra-High Power Saw: Boasting a powerful motor that can reach 200W and 10000 RPM, this mini table saw for hobbies helps you finish your projects faster. Control the speed of your mini saw easily through the front dial..
  • ✅ Safe For Your Hands: Unlike standard miter saw, tile saw, or vinyl floor cutter products, our portable workbench saw has fixing holes that secure it on the work surface, preventing slipping, vibration, and cutting accidents..
  • ✅ Powerful Cutting Disc: Featuring high-quality tungsten steel cutting blades, our hobby table saw can cut wooden or acrylic boards, small rock, jade, plastic, aluminum, chrome, or precious metals easily, with great precision..
Check Stock