Top Sata Port Multiplier

Broadcom HBA 9400-8e - Storage controller - 8 Channel - SATA 6Gb/s/SAS 12Gb/s low profile - 1.2 GBps - RAID JBOD - PCIe 3.1 x 8

  • 4 Internal SATA 6Gb/s Ports. SATA ports are bootable.
  • Compliant with Serial ATA Specification 3.0. Hot Plug and Hot Swap.
  • Compliant with PCI-Express Specification v1.0.
  • Supports Native Command Queue (NCQ). Supports Port Multiplier FIS Based Switching or Command Based Switching.
Check Stock

IO CREST Internal 5 Port Non-RAID SATA III 6GB/s M.2 B+M Key Adapter Card for Desktop PC Support SSD and HDD. JMB585 Chipset

  • Connect five SATA drives to a M.2 B+M key Connection, providing up to 1700 MB/s Speed..
  • Plug and play supported, No additional software installation or setting required..
  • Can support port Multiplier that is not in a RAID configuration. Compatible with SATA hard drives & Solid state drives and computer systems with SATA controllers..
  • 2-Lane M.2 PCI-Express 3.0 interface (B & M Key). complies with PCI Express base Specification Revision 3.1a..
Check Stock

ADAPTEC - RAID Adaptec 71605 16-Ports SAS/SATA RAID Controller003cbr003eRAID 71605 SINGLE SAS/SATA PCIE003cbr003eSerial Attached SCSI (SAS) - PCI Express 3.0 x8 - Plug-in Card - RAID Supported - 0, 1, 1E, 5, 6, 10, 50, 60 RAID Level - 1 GB

  • PCIe x4 interface (x2 Bandwidht) to 16 ports NONE-RAID SATA III 6Gbps card will allow users add 16X SATA III ports on desktop PCs, Servers, and NAS systems for storage expansions or AHCI boot use..
  • Select the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • ASMedia PCIe product ASM2806, a low latency, low cost and low power 6 lane , maximum 4 downstream ports packet switch. With upstream PCIe Gen3x2 bandwidth,.
  • Supports Hot Plug and Hot Swap. Supports Native Command Queue (NCQ). Compliance Serial ATA AHCI Spec. Rev. 1.3, Serial ATA Rev. 3.0.
  • Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps. Supports Port Multiplier.
Check Stock

IO CREST Internal 5 Port Non-Raid SATA III 6GB/S Pci-E X4 Controller Card for Desktop PC Support SSD and HDD with Low Profile Bracket. JMB585 Chipset SI-PEX40139

  • Connect five SATA drives to any free PCI-E x4 Slot, providing up to 1700 MB/s Speed..
  • Plug and play supported, No additional software installation or setting required..
  • Can support port Multiplier that is not in a RAID configuration..
  • Complies with PCI Express base Specification Revision 3.1a. Compatible with SATA hard drives & Solid state drives and computer systems with SATA controllers..
Check Stock

IO CREST 2 Port SATA III PCI-e 3.0 x1 Non-RAID Controller Card Jmicro Chipset SI-PEX40148

  • Compatible with PCI express Base Specification Revision 3. 1a.
  • Compliant with Serial ATA AHCI (advanced host controller interface) Specification Rev 1. 0, Supports SATA 3. 0 transfer rate up to 6Gbps. Maximum Sequential Read / Write Speed 850 MB/s..
  • Micron JMB582 Chipset, Port Multiplier FIS-based and Command-based switching supported. Hot plug and Hot swap SATA ports. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i..
  • Compatible with Windows XP/7/8/10/MAC/NAS/Linux OS. No driver installation is required. Support install Windows OS from Win10 PE..
Check Stock

ASHATA PCIE SATA Card,PCI-E to SATA3.0 Controller Expansion Board 8-Port SATA3.0 Interface Expansion Card,PCI-E SATA Adapter Card Fit for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 Card】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching and hot plug..
  • 【Compatible with SATA6G/3G /1.5G Hard Drives.】Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i..
  • 【Wide Compatibility】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0..
  • 【Note】PCI-E must have a slot above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on..
  • 【Tips】User with SATA3.0 data cable for best results.Any questions,Please feel free contact us,we will provide you with high quality after-sales service..
Check Stock

YUNKOZAND 1X PCIE SATA Card 2 Ports,with 2 SATA Cables,6 Gbit/s PCIE SATA Expansion Card,PCIE to SATA Controller,PCI-E 3.0 GEN3 JMicron + JMB582 Chip

  • 4 Channel for 4 storage devices like SSD or HDD. This Card will let You Grow as Your Needs Grow to Add more Devices to your System..
  • Configurable Port as Internal SATA or External eSATA Port, SATA III 6Gb/s on Every Channel for all your SSD and HDD..
  • 1 Port Multiplier Function For Multi-Bay Enclosures (4 drives), Support both FIS and Command-based Switching..
  • RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your Data Safe and Faster Disk Access, Low Profile Bracket Included..
  • Support Windows XP, Server 2003/2008, Vista, 7, 8, 8.1, 10.
  • For RAID use, must do a new clean install of the OS to boot..
  • install only on true PCIe x4 slot or x8 or x16 Slot only, Download Latest drivers from vantecusa website..
  • Note: Cannot Boot If you just move your drive to this controller, write to vantecusa technical support for more info..
Check Stock

Richer-R RAID Contreller Card,RAID Controller SAS 9311-8i 12G SAS3008 12Gb SFF8643 with PCI-Express 3.0 Interface for Windows Vista / 2008 / Server 2003 / for Linux

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset.
  • PCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset..
  • Does not support Hardware RAID using Port Multiplier.
Check Stock

Heayzoki 8 Ports PCI-E to SATA 3.0 Card,PCI Express PCI-e Expansion Card,PCI-E to SATA3.0 Controller Expansion Board,for Windows 7/8/XP/10,with Driver Disc,Semi-High Baffle

  • 【WIDE COMPATIBILITY】--Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • 【HIGH SPEEDS】--Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i..
  • 【SUPPORTS MODE】--Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching and hot....
  • 【WARM TIPS】--Compatible with SATA6G, 3G and 1.5G hard drives.User with SATA3.0 data cable for best results.PCI-E must have a slot above V2.0, V1.0....
  • 【CUSTOMER SERVICE】--We guarantee the product is 100% brand new. Please feel free to contact us if you have any problems, we will give you a....
Check Stock

LSI Logic LSI00208 Logic MegaRAID 9260-16i 16-port SAS RAID Controller - Serial ATA/600 - PCI Express 2.0 x8 - Plug-in Card - RAID Supported - 0, 1, 5, 6, 10, 50, 60 RAID Level - 4 Total SAS Port(s) - 4 SAS Port(s) Internal

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset.
  • PCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset..
  • Does not support Hardware RAID using Port Multiplier.
Check Stock

Syba 5 Bay Tool Less Tray Hot Swappable 2.5' 3.5' SATA III RAID HDD External USB 3.0 Enclosure Windows MacOS SY-ENC50118

  • Supports all brands of 2.5″ And 3.5″ Sate I/II/III hard disk Drive up to 10TB per drive up to 5 x 10TB. Support hard drive transfer rate up to SATA III.
  • Raid support: RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, span, and JBOD.
  • East interface requires port Multiplier w/FIS-based switching on main computer to enable access to multiple HDDs simultaneously.
Check Stock

COMeap (2-Pack) Motherboard ATX Mini 4 Pin to 2X Right-Angle SATA Hard Drive HDD Power Adapter Cable for Lenovo 18-inch(46cm)

  • 『Mini 4P - 2x Right-Angle SATA』Mini 4 Pin port plugs into Lenovo motherboard (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.), Right-angle 15 Pin SATA port plugs into the hard drive.
  • 『Connectors』Connector A: ATX 12V mini 4 pin (NOTE: not standard 4 pin. Please refer to the image 2nd for mini 4 pin port's dimension), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Compatibility』ONLY compatible with Lenovo motherboard with mini 4 pin port including: M410 M415 M510 M510S M510A M610 M710 B415 B250, Thinkcentre m720 tower, ThinkSystem ST50 Servers, ThinkCentre M710t.
  • (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.).
  • 『Parameter』Gauge: 18AWG, Length(including connectors): 18 inches(46cm)，Between 2 SATA: 2.36 inches(6cm),Between 2 SATA: 8 inches(20.5cm), Quantity: 2 pieces, Self-adhesive tape*1pcs.
Check Stock