Top Sata Ports

Supermicro Mini ITX A1SAI-2750F-O Eight Core DDR3 1333 MHz Motherboard and CPU Combo

  • CPU (Included): Intel Avoton C2750 Processor (2.4GHz, Octa-Core).
  • Memory: 4x 240pin DDR3-1600/1333 DIMM Slots, Dual Channel, ECC, Unbuffered, Max Capacity Of 64GB.
  • Ports: 3x USB 2.0 Ports (2 rear, 2 via header controlled by USB_SEL1 and USB_SEL2 jumper), 1x VGA Port, 1x Serial Port, 2x RJ45 LAN Ports, 1x RJ45....
Check Stock

SUPERMICRO MBD-X9SCM-F-O LGA 1155 Intel C204 Micro ATX Intel Xeon E3 Server Motherboard

  • CPU: Socket 1155, Supports Xeon E3-1200?Family and 2nd Generation Intel Core i3 / Pentium Processors.
  • Memory: 4x 240pin DDR3-1333/1066/800 DIMMs, Dual Channel, ECC, Unbuffered, Max Capacity up to 32GB.
  • Slots: 4x PCI-Express 2.0 x8 Slots (two run at x4).
  • SATA: 4x SATA2 Ports, Support RAID 0/1/5/10.
  • Video: Nuvoton WPCM450RA0BX Graphics Controller.
  • Ports: 9x USB 2.0 Ports (2 rear, 6?via header, 1 type A).
Check Stock

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

Gigabyte Motherboard GA-78LMT-USB3 AM3+ 760G/SB710 DDR3 SATA PCI Express USB3.0 microATX Electronics

  • CPU (Included): Intel Atom C2558 Processor.
  • Memory: 4x 204pin DDR3-1600/1333 SODIMM Slots, ECC, Max Capacity of 64GB.
Check Stock

MSI Extreme Gaming Intel X99 LGA 2011 DDR4 USB 3.1 ATX Motherboard (X99A SLI Krait Edition)

  • Memory: 8x DDR4-3333(OC)/ 3110(OC)/ 3000(OC)/ 2750(OC)/ 2666(OC)/ 2600(OC)/ 2400(OC)/ 2200(OC)/ 2133 DIMM Slots,Quad-Channel, Non-ECC, Unbuffered,Max Capacity up to 128GB.
  • Slots: 4x PCI-Express 3.0 x16 Slots, 2x PCI-Express 2.0 x1 Slots.
  • SATA: 10x SATA3 Ports, 1x SATA Express Port.
  • Ports: 2x USB 3.1 ports (rear), 10x USB 3.0 Ports (6 rear, 4 via headers), 6x USB 2.0 Ports (2 rear, 4 via headers), 1x PS/2 Keyboard/Mouse Combo Port,1x Optical S/PDIF Out, 1x RJ45 LAN Port,Audio I/O Jacks.
Check Stock

SATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices

  • ▶【10 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 10 SATA 3.0 interfaces and supports the simultaneous connection of 10 SATA hard disks, the transfer speeds up to 6Gbps.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
  • ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
  • ▶【Supports RAID Mode】: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux.
  • ▶【What You Get】 : 1 x PCIe to SATA 3.0 10-port controller card, 10 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

ASRock Intel Avoton C2750 2.4GHz/DDR3/SATA3/V&2GbE/Mini-ITX Motherboard and CPU Combo C2750D4I Color Box

  • CPU (Included): Intel Avoton C2750 Processor (2.4GHz, Octa-Core).
  • Memory: 4x 240pin DDR3-1600/1333 DIMM Slots, Dual Channel, ECC, Unbuffered, Max Capacity Of 64GB.
  • Ports: 3x USB 2.0 Ports (2 rear, 2 via header controlled by USB_SEL1 and USB_SEL2 jumper), 1x VGA Port, 1x Serial Port, 2x RJ45 LAN Ports, 1x RJ45....
Check Stock

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

  • Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
  • 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
  • 2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
  • PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
  • Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
  • Perfect for data recovery & backup / Improves the storage & performance of a PC.
Check Stock

Intel Integrated RAID Module Storage Controller RMS25KB040

  • This RAID controller has four internal SAS/SATA ports and uses a x8 or wider PCI Express* server board slot.1.2 Operating System Support Supports SAS/SATA devices at speeds up to 300 MB/second per port Supports the SATA II protocol over SAS transp.
  • Contains four internal SAS/SATA ports Supports up to 8 SAS/SATA II devices via expanders Supports up to 64 virtual disks Supports up to 8 arrays Supports RAID levels 0, 1, 5, 6, 10, 50, and 60 Hardware exclusive OR (XOR) assistance.
  • Online capacity expansion Online RAID level migration Physical drive roaming RAID controller migration Fast virtual drive initialization Hot-spare drive configuration, both private and global.
  • SATA drive hot-plug Staggered spin-up Native command queuing Support for SMART* Auto rebuild Variable data stripe size configured per virtual drive.
  • 128 MB of ECC DDR2 667 MHz SDRAM integrated on the controller Read and write cache policy SES2 intelligent enclosure support PCI hot-plug support Background media test (patrol read) Background data integrity test.
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • ...cient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • Universal compatibility with computer power supplies with SATA connectors and popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card.
Check Stock

SuperMicro M11SDV-8C+-LN4F Mini-ITX Motherboard with EPYC 3251 SoC Processor

  • Memory: 4x 204pin DDR3-1600 SODIMM Slots.
  • Slots: 1x PCI-Express 3.0 x16 Slot, 1x PCI-Express 2.0 x8, 1x PCI-E 2.0 x4.
  • Ports: 4x USB 3.0 ports, 6x USB 2.0 Ports, 1x VGA Port, 2x Serial Ports, 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port.
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock