Top Sata Raid Cards

Adaptec RAID 71605 Storage Controller 2274400-R

  • ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
  • ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
  • ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
  • ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

StorageTekPro LSI 9340-8i flashed to IT Mode = 9300-8i w/LSI P16 IT-Mode F/W for ZFS FreeNAS unRAID

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

LSI 9240-8i 6Gbps SAS Raid Card, HBA FW:P20 9211-8i IT Mode for ZFS FreeNAS unRAID 2 SFF SATA RAID Controllers

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

TERRAMASTER D5-300 USB3.1 Gen1 Type C 5-Bay External Hard Drive Enclosure Support RAID 0 RAID 1 RAID 5 RAID 10 Clone JBOD Single Disk Hard Disk RAID Storage Diskless

  • D5-300 is equipped with brand new USB 3.1(Gen1) type-C high-speed interface and compatible with Mac, Windows and Linux computers, and also works with the computers possessing the Thunderbolt 3 interface..
  • Up to 100TB storage capacity. D5-300 can support five (5) SATA hard drives, is compatible with 20TB 3.5 inch SATA hard drive, and has a total storage capacity up to 100TB ( in RAID0). Compatible with various hard drives including 3.5" SATA hard drives, 2.5" SATA hard drives and SSD. (Note: users need to purchase their own hard drives. HDD's are not included.).
  • Relying on the USB 3.1 Gen1 super speed protocol, the D5-300’s transmission speeds can reach up to 220MB/s (Tested with dedicated NAS drives 4TB RAID 0)..
  • Supports multiple RAID modes: RAID 0, RAID 1, RAID 5, RAID 10, CLONE, JBOD, and Single Disk. RAID 5 is recommended as the best option for D5-300, which balances between data security and storage capacity..
  • Various applications. Great for video editing, photo backup, storage of R&D technical documents, archival backup, music libraries, financial records, storage of video surveillance recordings and corporate data storage. Featuring an aluminum-alloy shell and low-noise fans, D5-300 is extremely solid and reliable with good heat dissipation ....
Check Stock

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

  • Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
  • 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
  • 2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
  • PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
  • Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
  • Perfect for data recovery & backup / Improves the storage & performance of a PC.
Check Stock

VIA VT6421A 3-Port SATA Raid & IDE Controller PCI Card

  • VIA VT6421A SATA Raid Controller and IDE PCI Card General Features: VIA VT6421A chipset PCI interfac.
  • Supports three SATA and one PATA (IDE) hard disk drives Up to 150 Mbps data transfer rate.
  • Only SATA supports RAID Supports ATA 133 high performance hard disk drives.
  • Supports Ultra DMA mode 6/5/4/6/2/1/0 Supports DMA mode 2/1/0 Supports PIO mode 4/3/2/1/0.
Check Stock

Mediasonic HFR2-SU3S2 PRORAID 4 Bay 3.5' SATA Hard Drive Enclosure - USB 3.0 & eSATA

  • Support 3.5″ SATA I / II / III hard disk drive up to 16TB per drive, Support Hard Drive Transfer Rate up to SATA III Speed. Hardware Raid controller built-in on board with one-button control..
  • One Button Raid Control support Single Drive Mode, Raid 0 (Spanning) JBOD, Raid 0 (Stripping), Raid 1 (Mirroring), Raid 3 (Stripped set with dedicated parity), Raid 5 (Stripped set with distributed parity), Raid 10 (Mirroring + Striping).
  • Transfer rate up to 5.0Gbps via USB 3.0, up to 3.0Gbps via eSATA..
  • Smart Fan with built-in thermal-sensor, Auto & Manual modes, and 3 speed levels.
  • Compatible with Mac OSX 10.8 or later and Windows 10 / 8.1 / 8 / 7.
Check Stock

Richer-R RAID Contreller Card,RAID Controller SAS 9311-8i 12G SAS3008 12Gb SFF8643 with PCI-Express 3.0 Interface for Windows Vista / 2008 / Server 2003 / for Linux

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset.
  • PCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset..
  • Does not support Hardware RAID using Port Multiplier.
Check Stock

StarTech.com 3.5" External Dual Hard Drive Enclosure Raid USB-C and USB-A SATA 6Gbps 2 Bay USB 3.1 SSD/HDD Enclosure (S352BU313R)

  • Create high performance external storage with a dual SATA HDD RAID array through USB 3.1 (10Gbps).
  • 2-Bay 3.5" HDD Enclosure with RAID support, including RAID 0, RAID 1, JBOD and SPAN (BIG).
  • 2-Bay hard drive enclosure supports SATA I/II/III (up to 6Gbps) and USB 3.1 Gen 2 (backward compatible with USB 3.0 / USB 2.0).
  • Dual 3.5" HDD/SSD/SSHD External Drive Enclosure provides high speed, high-capacity external data storage for your USB-C or USB-A laptop or computer (both USB-C and USB-A cables included).
  • Solid aluminum enclosure with metal hard-drive mounting tray and built-in fan to assist in heat dissipation / 2-drive 3.5" HDD/SSD RAID enclosure / 2-bay 3.5in enclosure / 2-bay 3.5" HDD RAID enclosure / 2-bay 3.5" SSD enclosure / Dual 3.5" HDD enclosure / Dual bay SATA enclosure / 2-bay 2.5" RAID enclosure.
Check Stock

MZHOU PCIe SATA Card 6 Port, with 6 SATA Cables and Low Profile Bracket, 6Gbps SATA 3.0 PCIe Card,Support 6 SATA 3.0 Devices, Built-in Adapter Converter for Desktop PC

  • Connect 6 mass storage devices simultaneously. With Windows XP / 7/8/10 / Ubuntu.
  • Use the 88SE9215 chip and the ASM109X chip to improve the stability and compatibility of the card.
  • This PCIe SATA card contains six SATA cables to simplify the connection!.
  • This PCIe SATA card allows you to add six 6 Gbps SATA 3.0 devices to your computer (a driver is required for two of the satellites)..
  • You can boot the system from this SATA controller, but without RAID. If your motherboard has a RAID function, you can use this SATA card to create a RAID.
Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....
Check Stock