Top Sata To Firewire Cables

FireWire 400 Cable Cord 4 Pin to 4 Pin Male to Male iLink DV Cable Firewire 400 IEEE 1394 Cord for Computer Laptop PC to Camcorder - 6 Feet Black

  • This specific cable features FireWire 4-pin connectors on either end, suitable for most connections to computersor other devices such as digital cameras, network attached storage devices, external hard drives, and printers which use the original IEEE-1394a standard better known as FireWire 400..
  • It is designed to deliver data perfectly between your IEEE-1394a devices, with triple shielded twisted-pair construction protected by a sturdy black outer jacket. You’ll get the full benefit of the 400 Mbps bandwidth.
  • plug and play/hot swap compatible design allows you to switch out cables at will, without having to worry about your computer or outboard device shutting down on you..
  • Error-free data transmissions via molded-strain relief and PVC overmolding. Provides extreme-velocity data-transfer rates via twisted-pair construction and maximum speed with no data loss..
  • Offers compatibility with PC, Apple FireWire and devices. High Speed Firewire Cable. Provides data transfer rates up to 400Mbps.
Check Stock

elago FireWire 400 to 800 Adapter (White) for Mac Pro, MacBook Pro, Mac Mini, iMac and All Other Computers

  • FireWire 800(1394b) to FireWire 400(1394b) connector adapter.
  • Works with standard 6-pin male FW400 cables.
  • Design for Mac Pro, MacBook Pro, Mac Mini, iMac and all other computers.
Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • ...ller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.
Check Stock

SATA Cable, SATA Data Cable and SATA Power Splitter Cable (4 Pack) SATA III Cable 6.0 Gbps SATA 3.0 Cable,15 Pin Power Splitter Cable

  • Sata Cable is made with copper wires, good contact performance for data transmission and environment friendly. SATA data cables and SATA power cables are compatible with all SATA connectors (HDD, SSD, CD DVD Blu-ray drives)..
  • Sata data Cable 6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, STRAIGHT & RIGHT ANGLE- Package includes both straight and right angle cable to meet your different demand. 90-degree design can make for better cable management in some situations, especially in tight spaces..
  • Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer..
  • Accessories 2xSata cable:1x1x 4-pin ATX to 2x 15-pin Sata Straight Power Splitter Cable 1x 15-pin SATA to 2x 15-pin Sata Straight Extend Splitter Cable.
  • Black 1 x Straight SATA 3.0 Cable 1 x Angle SATA 3.0 Cable.
Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

Cable Matters 3-Pack 15 Pin SATA Power Splitter Cable 8 Inches

  • SATA Y cable splitter powers two Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards to a single connection on a computer power supply.
  • Snug-fitting drive connector and channel guides on the SATA power cables provide a secure connection that will not accidentally disconnect.
  • Upgrade cost saver SATA power cable spares the expense of upgrading an existing power supply to connect a new SATA drive.
  • Cost-effective 3 pack provides spare SATA extension power cables for new installations or repairs.
  • Keep a spare in your IT toolkit or at the test bench.
  • DIY or IT installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 8 inch SATA power adapter cable (not including connectors) provides sufficient length for internal cable management in most configurations.
  • Heavy duty SATA splitter with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
  • The hard drive power cable supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • Compatible with popular SATA equipped devices suc....
Check Stock

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock

Longdex SATA Power Extension Cable 5PCS 20cm SATA Power 15-Pin Male to 2 x 15P Female Y Splitter Cable Adapter

  • SATA power cables save the cost of upgrading existing power supplies to connect to new SATA drives. The cost-effective 2-Pack provides a spare SATA expansion power cable for new installations or maintenance..
  • SATA cables provide power for two serial ATA HDDs, SSDs, optical drives, DVD burners, and PCI cards, and provide a single connection through the computer power supply. The tightly matched drive SATA connector and the channel guide on the power connector provide Strong connection, no accidental disconnection..
  • The heavy-duty SATA splitter with 2 SATA 15-pin female connectors and 1 SATA 15-pin male is composed of 18 AWG flexible wires. When two SATA hard drives are connected to a power source, the performance is reliable..
  • The hard drive power cord supports 3.3V, 5V and 12V power supply voltages between SATA I, II, III drives and the power connection without degrading performance..
  • DIY or IT installers like to share the convenience of PSU connection when installing new internal components (such as a DVD burner). The 7.87-inch harness (excluding connectors) provides sufficient length for internal cable management in most configurations..
Check Stock

Micro SATA Cables Power eSATA to eSATA and USB Adapter

  • Combination Power eSATA to eSATA and USB Adapter..
  • Authentic only if sold by Micro SATA Cables..
  • Categories: Drive Adapters, Drive Converters, SATA & eSATA Adapters, USB 2.0 & 3.0 Adapters.
Check Stock

Monoprice Data Cable - 3 Feet - Red | SATA External Shielded Cable - eSATA to eSATA (Type I to Type I)

  • Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers..
  • Unlike cables for internal applications eSATA cabling must be shielded.
  • The eSATA connectors are keyed differently to prevent the use of internal SATA cables in external applications.
  • This shielded eSATA cable is certified to perform to SATA 6 Gbps performance standards..
  • Each end is terminated in an eSATA connector for use with external SATA devices and controller ports only..
Check Stock

Monoprice Data Cable - 6 Feet - Black | SATA 6 Gbps External Shielded Cable - eSATA to eSATA (Type I to Type I)

  • Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers..
  • Unlike cables for internal applications eSATA cabling must be shielded.
  • The eSATA connectors are keyed differently to prevent the use of internal SATA cables in external applications.
  • This shielded eSATA cable is certified to perform to SATA 6 Gbps performance standards..
  • Each end is terminated in an eSATA connector for use with external SATA devices and controller ports only..
Check Stock

Boss NS-2 Noise Suppressor Pedal

  • STRONG PRACTICALITY:Can reduce EMI and RFI on AC power lines, suitable for noise cancellation on USB, coaxial cables, power lines, firewire, audio, video cables, etc..
  • HUMANIZED DESIGN: Simple installation, detachable barrel, elastic buckle on the port, not easy to be scattered..
  • PREMIUM MATERIAL: Made of plastic case and ferrite core for long service life..
  • INSTRUCTIONS FOR USE: Install a ferrite core on the device side of the cable to clip onto the cable whether or not the cable has a connector or is hardwired to the device..
  • PACKAGE INCLUDES: 28 cable clips with 5 different sizes 3.5 / 5/ 7/ 9/ 13 mm inner diameter..
Check Stock