Top Sata To Sata
Benfei 15 Pin SATA Power Y-Splitter Cable 8 Inches - 2 Pack
- Y-SPLITTER SATA CABLE powers two Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards to a single connection on a computer power supply.
- Snug-fitting drive SATA connector and channel guides on the power supply connector provide a secure connection that won¡¯t accidentally disconnect.
- UPGRADE COST SAVER SATA power cable spares the expense of upgrading an existing power supply to connect a new SATA drive.
- Cost-effective 2-Pack provides spare SATA extension power cables for new installations or repairs..
- DIY or IT installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
- 8 inch cable harness (not including connectors) provides sufficient length for internal cable management in most configurations.
- HEAVY DUTY SPLITTER with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
- Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
- COMPATIBLE with popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, Asus 24x DVD-RW S....
Check StockPadarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD
- 【SATA III 1 to 5】SATA3.0 1 to 5 expansion card supports 6-port 6.0Gbps SATA III interface. This expansion card requires the motherboard or expansion card support point (SATA Interface Multiplier) to recognize 5 hard drives. Normal motherboard SATA does not support this function. If not, only one hard disk can be recognized..
- 【High Performance】SATA III PHY output swing control and automatic impedance calibration. Plug in the SATA or DC2.5 power cord to charge the expansion card. Plug the SATA input cable into the motherboard or expansion card to charge the SATA..
- 【Meet The Specification】The SATA3.0 expansion card complies with the Serial ATA Port Multiplier specification, the serial ATA port selector specification, the ATA PHY series electrical specification revision 1.0, and the accessory specification ATA series high-speed serialization..
- 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
- 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer servic....
Check StockASM1166 PCIe X1 SATA Card 6 Ports, Non Raid, Joylifeboard PCIE SATA III Controller Expansion Card 6 Gbps, Support 6 SATA 3.0 Devices, PCIe SATA Card with 6 SATA Cables+Thin Bracket
- ✿【6 Ports PCIe to SATA 3.0 Expansion Card】: Six SATA 3.0 devices can be added to this PCIE 4X to SATA 3.0 card, a simple and stable solution to expand your sata storage by 6x, compliant with SATA 3 max speed 6Gbps, SATA 2 (3Gbps), SATA 1 (1.5Gbps)..
- ✿【Wide Compatibility】: This 6 Port PCIE 1X SATA card works on PCIe X1/X4/X8/X16 card slots, improve the stability and compatibility of the card.The SATA Card with 2 size profile brackets supports WinXP/7/8/10, Linux,MacOS ,Ubuntu,Synology,NAS,etc, perfect for IPFS mining rig..
- ✿【Easy to Install】: Support ACHI 1.0 mode, If the PCs SSD/HDD in AHCI boot up mode, you can insert the hard drive into this sata card directly. No need driver, plug and play. This 6-port PCIe SATA III Controller Card is non raid, data can be protected by OS..
- ✿【High Performance】: Super heatsink is long-lasting high temperature resistance. 3 solid capacitors can improve the stability of the supply. Support switch based on porter FIS or switch based on command.Chip: ASMedia+ASM1166.
- ✅【Warm Service】: 6 Indicator LEDs for each SATA channel show which HDD is active and working properly. We are committed to providing high-quality product quality and sales services. Any problem please feel free to contact us, we w....
Check StockDaFuRui 12-Pack 90 Degree Right Angle Cable Matters Straight SATA Cable Black III 6.0 Gbps SATA Cable Cable Pack - 16 Inches
- ★SATA revision 3.0 (aka SATA III) provides up to 6 Gbps data throughput.
- ★SATA III cable compatible with Serial SATA hard drives, Blu-ray/ DVD/ CD drives, and other Serial ATA devices, spare for different SATA systems or for RAID configuration.
- ★Easy to fit into hard areas and tight spaces, providing flexibility to posit.
- ★16IN/40CM SATA cables with 90-degree design connector on both end Bullet Point.
- ★Package Content: 12-Pack Straight SATA III 6.0 Gbps SATA Cable, Color: Black.
Check StockLongdex SATA Power Extension Cable 5PCS 20cm SATA Power 15-Pin Male to 2 x 15P Female Y Splitter Cable Adapter
- SATA power cables save the cost of upgrading existing power supplies to connect to new SATA drives. The cost-effective 2-Pack provides a spare SATA expansion power cable for new installations or maintenance..
- SATA cables provide power for two serial ATA HDDs, SSDs, optical drives, DVD burners, and PCI cards, and provide a single connection through the computer power supply. The tightly matched drive SATA connector and the channel guide on the power connector provide Strong connection, no accidental disconnection..
- The heavy-duty SATA splitter with 2 SATA 15-pin female connectors and 1 SATA 15-pin male is composed of 18 AWG flexible wires. When two SATA hard drives are connected to a power source, the performance is reliable..
- The hard drive power cord supports 3.3V, 5V and 12V power supply voltages between SATA I, II, III drives and the power connection without degrading performance..
- DIY or IT installers like to share the convenience of PSU connection when installing new internal components (such as a DVD burner). The 7.87-inch harness (excluding connectors) provides sufficient length for internal cable management in most configurations..
Check StockBEYIMEI PCIe 4X SATA Card 6 Ports,SATA III 6 Gbps Controller Expansion Card, ASM1166/SATA 3.0 Non-Raid,with 6 SATA Cables, (Support 6 SATA 3.0 Devices)
- * Simple to Use : NO Driver required Plug and play, support 2.5 inch solid state drive, 2.5 inch mechanical hard drive, 2.5 inch Blu-ray drive, 3.5 inch mechanical hard drive, 3.5 inch Blu-ray drive, etc. It is widely applied as start-up disk, support hot swappable..
- * SATA 3.0 & PCIE V3.0 : Support SATA transfer rate: SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps). Compliant with PCI-Express specification V3.0 and backward compatible with V2.0. PCI-Express X4 interface, and compatible with PCI-Express X4/X8/X16 slots(recommended to use under PCI-E 3.0, faster)..
- * 6 Ports Adapter Card --- You could add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card.(4X bidirectional bandwidth theoretical speed up to 8GB/S) ,Support Intelligent Sleep - If you do not operate the computer for 3 minutes, the hard disk will enters an automatic sleep mode , and will automatically activates when rewriting data..
- * Multiple Operating Systems Support : Adopt imported solution ASMedia ASM1166/SATA3 solution. It can support multiple operating systems:Compatible with Windows / 8 / 10 / synology /Ubuntu /Linux..
- *Package includes 1 * PCIe SATA 3.0 controller card , 6 * SATA cable and 1x 15pin SATA power splitter cable,1* Standard Profile Bracket,1* Low Profile....
Check StockBENFEI SATA to Molex, 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches
- FLEXIBLE SATA POWER CABLE connects the latest Serial ATA hard drives or optical drives to a power supply with legacy Molex LP4 ports.
- Male to Female Molex to SATA cable with straight connectors is the perfect 10 inch length for internal cable management.
- COST-EFFECTIVE 3-PACK of hard drive power cables provides a spare or replacement SATA to Molex cable when upgrading your computer.
- IDEAL SOLUTION for the DIY computer builder or IT tech repair when installing new or replacement SATA hard drives or DVD drives to a power supply that only has Molex power ports.
- RECYCLE LEGACY EQUIPMENT to connect new SATA HDDs and optical drives to older power supplies with 4 pin Molex ports.
- COMPATIBLE with 5V SATA devices connecting to 12V ATX power supplies.
- Sample compatibility list includes Antec VP-450W Power Supply, ASUS 24x DVD-RS serial-ATA internal optical drive, ASUS DVD SATA Supermulti Burner, Coolmax 500W Power Supply, Cooler Master Elite 460W Power Supply, Crucial 256GB SATA 2.5" Internal SSD, EVGA 430W Power Supply, Intel 520 Series 120GB SATA 2.5" SSD, Kingston Digital 120GB ....
Check StockCable Matters 3-Pack SATA III 6.0 Gbps SATA Cable 18 Inches (SATA Cable for SSD, SATA SSD Cable, SATA 3 Cables) Black
- Motherboard mate SATA III cable is specifically designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives.
- Blazing fast SATA III speeds up to 6 Gbps deliver superior performance for a custom gaming or RAID configuration.
- Provides secure connections for fast and reliable file transfers.
- Backwards compatible with SATA I, II, III hard drives.
- Low profile SATA data cable has a flexible jacket to allow an efficient and organized installation in tight computer cases.
- Bright cerise colored cable provides easy identification when troubleshooting.
- Cost-effective 3 pack SATA cables provides spare or replacement hard drive cable for a last minute installation or to fix troublesome connection problems.
- Compatible with popular SATA equipped devices such as: 24x DVD-RW Serial-ATA Internal Optical Drive, Crucial MX100 BX100 MX200 SATA Solid State Drive, Kingston240GB SSD V300 SATA 3 Solid State Drive, LG Electronics 14x Internal BDXL Blu-Ray Burner Rewriter, Samsung 850 EVO SSD 850 Pro SSD, Seagate 3TB Desktop HDD SATA 6Gb/s 3.5-Inch Internal Bare Drive, Extreme PRO 240GB, SIIG DP SATA 4-Port Hybrid PCIe, WD Black Performance Desktop Hard Drive, WD Green Internal Hard Drive.
Check StockCable Matters 3-Pack SATA III 6.0 Gbps SATA Cable 24 Inches (SATA Cable for SSD, SATA SSD Cable, SATA 3 Cables) Black
- Motherboard mate SATA III cable is specifically designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives.
- Blazing fast SATA III speeds up to 6 Gbps deliver superior performance for a custom gaming or RAID configuration.
- Provides secure connections for fast and reliable file transfers.
- Backwards compatible with SATA I, II, III hard drives.
- Low profile SATA data cable has a flexible jacket to allow an efficient and organized installation in tight computer cases.
- Bright cerise colored cable provides easy identification when troubleshooting.
- Cost-effective 3 pack SATA cables provides spare or replacement hard drive cable for a last minute installation or to fix troublesome connection problems.
- Compatible with popular SATA equipped devices such as: 24x DVD-RW Serial-ATA Internal Optical Drive, Crucial MX100 BX100 MX200 SATA Solid State Drive, Kingston240GB SSD V300 SATA 3 Solid State Drive, LG Electronics 14x Internal BDXL Blu-Ray Burner Rewriter, Samsung 850 EVO SSD 850 Pro SSD, Seagate 3TB Desktop HDD SATA 6Gb/s 3.5-Inch Internal Bare Drive, Extreme PRO 240GB, SIIG DP SATA 4-Port Hybrid PCIe, WD Black Performance Desktop Hard Drive, WD Green Internal Hard Drive.
Check StockAdaptec 29160 PCI to Ultra160 SCSI Card Kit with EzSCSI Software
- 1.The FS-S4-Pro is a PCI Express 3.0 X1 interface(8Gbps) to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Servers, MAC Pro and Network Attached Storage (NAS)..
- 2.Selected the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
- 3. Plug and Play on Windows Server 2019, 2016 ,2012R2, 2012, 2008R2, 2008, 2003R2, 2003(32/64), Windows XP, Vista, 7, 8.x,10 (32/64bit), MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems..
- 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot..
- 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 4X max SATA interface power supply for HDD/SSD. 3. Users must make sure PCs/Motherboards have at least one PCIE slot befo....
Check StockCable Matters 2-Pack 6 Gbps SATA III to eSATA Cable 3 Feet
- Internal to external connectivity changeover SATA cable is specifically designed to connect existing motherboards with SATA port to an external hard drive, enclosure or docking station with eSATA.
- Convenient alternative to using a USB port on your computer.
- Blazing fast SATA III speeds up to 6 Gbps are faster than USB 3.0 equipped drives and much faster than a USB 2.0 to HDD adapter.
- Upgrade to an eSATA enabled TB hard drive for direct file back-up instead of using a network.
- Provides secure connections for fast and reliable file transfers.
- Backwards compatible with SATA I, II, III hard drives.
- Fully shielded & flexible eSATA to SATA cable is engineered to reduce EMI noise interference.
- Latching SATA connector attaches securely for a trouble-free installation.
- Flexible cable jacket allows installation in tight computer cases.
- SATA and eSATA connectors are keyed differently to avoid connecting incorrectly.
- Cost-effective 2-pack provides spare or superior replacement SATA to ESATA cable cable to fix troublesome connection problems.
- Longer cable length allows location of an external hard drive in a convenient location.
- Low cost way to add eSATA when you have a free internal SATA port or to repurpose older SATA internal hard drives..
Check StockSATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices
- ▶【10 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 10 SATA 3.0 interfaces and supports the simultaneous connection of 10 SATA hard disks, the transfer speeds up to 6Gbps.
- ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
- ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
- ▶【Supports RAID Mode】: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux.
- ▶【What You Get】 : 1 x PCIe to SATA 3.0 10-port controller card, 10 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock