Top Saw Fences And Guide Rails

Rugged Tools Guide Rail Bag - Protective Track Saw Bag For Saw Guide Rails up to 59

  • PREMIUM QUALITY DETAILS - Heavy-duty 600 Denier Polyester - rip and tear resistant and water resistant. Protected in your truck bed, car, van, work....
  • COMPATIBLE WITH MOST MAJOR BRAND GUIDE RAILS (up to 59") - Compatible with most major saw guide rails up to 59", including Makita 55", DeWalt 59",....
  • PROTECTION ON ALL SIDES - Full padded protection on both exterior sides. Interior protective partition - keeps guide rails isolated, no rubbing or....
Check Stock

Magswitch Dual Roller Guide Attachment for Magswitch Workholding System

  • -The Magswitch Dual Roller Guide is the ultimate third hand when you are doing the most difficult and dangerous woodworking projects on a bandsaw or general infeed outfeed support on tables and fences..
  • -SUPPORT: The dual roller guide helps support a tall panel or hold down a long piece of wood and steady your resaw projects..
  • -FEATURES: A dual set of roller bearings provide firm yet smooth glide of wood through a saw blade and micro adjustment for fine tuning to 90 degrees..
  • -EASY SET UP: The dual roller's low profile design allows for fast, strong set up anywhere on a steel table or cast iron fence, even on the smallest table..
  • -INCLUDES: Dual roller guide and all required attachment hardware..
  • Features a dual set of roller bearings for firm yet smooth glide of wood through a blade..
  • Includes micro adjustment for fine tuning to 90 degrees..
  • Ideal for re-sawing on band saws, a second hand to hold raised/long or tall panels against a fence on table saws, general in-feed out-feed support on tables or fences..
  • Built from strong and durable ABS UL94VO material for years of use..
Check Stock

COVE CUTTING TABLE SAW JIG

  • Cove Cutting Table Saw Woodworking Jigs: Cut custom coves on your table saw without juggling all those fences and clamps! Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the lumberyard..
  • Safe Coving: Our cove cutting jig for table saws provides everything you need for safe and easy coving. Try angling the blade for a truly unique shape..
  • Versatile: This crown molding jig is perfect for making angled cuts, as well as other decorative woodworking projects..
  • Secures The Fences: An ingenious portable clamping system secures the fences using the 3/4" miter slots on the saw table. This cove cutting jig makes cutting cove molding on a table saw easy!.
  • Large, Easy Grip Knobs: Large, easy-grip knobs make for quick, tool-free setups. This table saw accessory includes a featherboard kit that holds stock firmly to the table for added safety, precision, and repeatability..
Check Stock

Makita E-00072 14\ Guide Bar, 3/8” LP.043”

  • ...ainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it..
  • 【Easy To Use】 - It is as easy to use as a pencil sharpener.
  • just set the clamp to the rod, position the pawl on the tooth, insert the burr into the guide sleeve, and turn the handle.Use it to precisely sharpen the chain of a chain saw to sharpen the chain and make gardening work smoother. Made of high-quality alloy material, it is durable and more sturdy..
  • 【Easy to Install】 - The chain saw sharpening tool is installed in the sharpener and can be installed and used at any time so that your chain can be sharpened in a short time. Keep oil on the chain and rails to reduce friction and extend service life..
  • 【Perfect Choice】 - Every time you grind a tooth, you only need to pull the chain.The precise sharpening can ensure that every tooth is repaired!Standard 30° sharpened front angle, anodized aluminum fixture with a detachable crank and a set of guide bushings,can be used for all chain saws. LCC WIAIM.
Check Stock

Szliyands Fixing Clip, Universal Fence Clip Fixing G-Clamp Fast Fixing Clip Woodworking Tools (Blue/red)2pcs

  • FUNCTION: Allow you to quickly secure a wide variety of auxiliary fences to your existing table saw, band saw, and router table fences without interfering or being in the way of additional stock, the blade or your hands.
  • PREMIUM BUILD: Compact and lightweight, they possess ergonomic clamp knobs, and a rugged body made out of high quality aluminum for long lasting durability.
  • Clamping range is 70 mm 150 mm, and such G clamp's quality is guaranteed, you can use it with confidence..
  • VERSATILE: Clamps can be used individually as stop blocks or used in pairs as sacrificial fences, half-fences and resaw fences – perfect for framing, furniture assembly, cabinetry and woodworking applications Crafted for ease in fitting any available fence.
Check Stock

VEVOR Table Saw Fence System, 57'×57' Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The miter saw fence system features a self-adhesive scale and magnified cursor to provide fast and accurate fence positioning. The self-stick measuring tape mounts directly to the fence and features high visibility numerals and in both metric and imperial scales..
  • Sturdy and Secure: Simple cam lever action locks the fence solidly in position, and torsion box design means no deflections while guiding wood. The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge 57-Inch maximum rip to the right of the blade. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw. It comes with a guiding rule, front guide rail and rear guide rail, and a set of accessories to facilitate your work..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. The Steel construction Ensures that the fence is parallel to the blade. It offers quick ripping and straight cuts..
Check Stock

VEVOR Table Saw Fence System, 37'×57' Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The miter saw fence system features a self-adhesive scale and magnified cursor to provide fast and accurate fence positioning. The self-stick measuring tape mounts directly to the fence and features high visibility numerals and in both metric and imperial scales..
  • Sturdy and Secure: Simple cam lever action locks the fence solidly in position, and torsion box design means no deflections while guiding wood. The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge 37-Inch maximum rip to the right of the blade. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw. It comes with a guiding rule, front guide rail and rear guide rail, and a set of accessories to facilitate your work..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. The Steel construction Ensures that the fence is parallel to the blade. It offers quick ripping and straight cuts..
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • ...to accommodate different profiles. The abrasive belt can prevent your stock from sliding or drifting in response. This, coupled with the heavy press switch, can keep your stock firmly in place..
  • REFERENCE: Transparent guide runs along the fence 51mm (2) above the table, to enable compatibility with most router table fences and prevent cutting into the sled. Using a fence instead of a miter bar installed at the bottom means that you will always be parallel to the router table fence. This is a significant time saving advantage, as you will no longer need to constantly readjust the router table fence..
Check Stock

Chainsaw Sharpener, Portable Chain Saw Sharpening Tool Set, Sharpener File Table, Quick Sharpening, Suitable for All Kinds of Chain Saws and Electric Saws (1pcs)

  • ★ CONVENIENT AND FAST SHARPENING: the new chain saw tooth sharpener provides a simple and quick way to sharpen the chain. The chainsaw can clean the blunt chain again in 2-4 seconds. The chain saw sharpening tool is light in weight, easy to carry, easy to use outdoors, and protects your hands from injury..
  • ★ HIGH-QUALITY MATERIALS: Saw chain sharpeners made of high-quality alloys, lightweight and durable chain saw sharpeners are suitable for most saw chains on the market..
  • ★ EASY TO USE: As easy to use as a pencil sharpener.
  • just fix the clamp on the rod, position the pawl on the tooth, insert the burr into the guide sleeve, and turn the handle..
  • ★ EASY TO INSTALL AND USE: The chain saw sharpening tool is installed in the chain and can be installed and used at any time, allowing your chain to sharpen the knife in a short time. Keep the oil on the chains and rails to reduce friction and extend service life..
  • ★ PRECISE MAINTENANCE: every time you grind your teeth, you only need to pull the chain. Precise sharpening to ensure that every tooth is repaired! Equipped with spare three grindstone replacement, convenient for timely replacement and maintenance.
Check Stock

SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser

  • Laser cutline guide for fast and accurate cuts.
  • 9 positive stops for setting common miter angles.
  • Table extension with left/right extension rails for long, large work pieces.
  • Quick-mount system for quick and easy setup on SKIL miter saw stand (3302-02).
Check Stock

Bora NGX Saw Plate Includes 55\ Non-Chip Strip That Elimates Tear Out, Designed for Straight Cuts While Using The NGX Clamp Edge System, 544001

  • Fixed Center Molded Channel Reduces Blade Offset And Guesswork.
  • Self-Adhesive Non-Chip Strip Attaches To The Bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish.
  • Quick-Release Clamps Are Adjustable So Your Saw Goes On And Off The Plate Effortlessly.
  • Aluminum Guide Rails Position Your Saw Accurately Every Time.
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock