Top Saw Line Pipe

Plumbing Inside Cutter, 1/4\ Hex Shank Pipe PVC Inside Cutter Internal Plastic Pipe Cutter(32mm Saw Blades*3, 44mm Saw Blades*1，Hexagon wrench）

  • Plumbing Inside pipe cutter kit installation sequence: extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), two sets of screw fastening parts and a hexagon wrench. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The plumbing saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pip....
Check Stock

WONDERSUNM Professional Tubing Notcher Tube& Pipe Notcher Adjustable up to 50degrees 3/4” – 3” Tubing Capacity 45 Carbon Steel Structure

  • Accurate notches tubes and pipe from 0-50 degree with the additional ability to offset the notch +/- 1” from the center line. (the cutter centerline is height adjustable to accommodate a wide variety of workpieces).
  • 45 carbon steel construction with needle roller bearing to ensure smooth operation..
  • Clamp in a vice or bolt to a table and use with any hand held drill..
  • Notch pipes an tubes with a OD from 3/4” to 3”.
  • Accepts hole saw thread sizes:1/2” x20TPI, 5/8”x18TPI (hole saw not included).
Check Stock

Electric Reciprocating Saw, Portable Electric Jig Saw for Wood Metal Cutting, Electric Drill Tool Attachment, Electric Hand Saw with 3 Saw Blades, Blue

  • ...ess electric drill, lithium battery-powered cordless electric drill, impact drill, etc., universal electric drill to electric saw, convenient and fast, no need for another electric saw..
  • 【Multi-Material Cutting】 3 kinds of saw blades can be used for wood cutting, steel pipe cutting, PVC pipe cutting, tree pruning, curved edge cutting and other purposes. The saw blade is quickly replaced (different materials need to be matched with different saw blades)..
  • 【Excellent Performance】 high hardness saw blade drive shaft (triangular drive shaft).
  • widened and thickened baffle to ensure safety.
  • high-strength anti-fall shell, strong and durable.
  • auxiliary handle, convenient for applying force..
  • 【Small and Easy to Carry】 100mm/135mm/150mm saw blades of different sizes and different purposes, the total length of the assembly is 27cm long, curve cutting, irregular shape processing, etc. are convenient and quick..
Check Stock

PVC Pipe Inside Cutter, AngleKai Stainless Steel Plumbing Inside Cutter with 4Pcs Saw Blades(44/35/32MM), Internal Plastic Pipe Cutter with 1/4\ Hexagonal Rod for PVC Pipe Inside/Outside Cutter

  • ✦【4Pcs Saw Blades】You will receive 1 set of PVC pipe inside cutter, including 4 saw blades (1.73in/ 44mm, 1.37in/ 35mm, 1.26in/ 32mm, 1.26in/ 32mm), a rich quantity to meet the requirements of different sizes of cutting pipes. There is a layer of protective oil on the saw blade, please wipe it clean before use..
  • ✦【Corrosion-resistance & Sturdy】The plumbing inside cutter is made up of high-quality 304 stainless steel, wear-resistant, sturdy, durable, and highly hard. The hexagonal connecting rod has a smooth surface, no burr, comfortable grip, and can be used for a long time..
  • ✦【Effective & Sharp】Saw blade has high glossy, features a smooth surface, and uniform and neat distribution of teeth, the sharp saw blade can help to cut the pipe quickly and effectively, 3 different sizes can be cut both internally and externally. The internal plastic pipe cutter can save time and effort..
  • ✦【Wide Application】PVC pipe inside cutter has a wide range of uses, not only suitable for cutting plastic tubes, but also suitable for cutting wood, and soft metals (Warming: Use with coolant and water to prevent overheating), is one of the essential tools for handymen..
  • ✦【Easy to Install】Place the flat washer into the screw first, then put the saw b....
Check Stock

AccEncyc PVC Pipe Inside Cutter Kit 1/4\ Hex Shank Plumbing Inside Cutter Internal Plastic Pipe Cutter with 6Pcs Saw Blade

  • PVC Pipe Inside Cutter Kit: Including 3pcs saw blades of 32mm/1.25" diameter, 3pcs blades of 44mm/1.75" diameter, 1/4" hex shank, serrated & flat washers, fasten screws..
  • Heavy Duty & Strong: The quality carbon steel shank features with the high hardness and smooth surface for good handling. Made of strong HHS and coated with the protective oil, the saw blades are durable, sharp, rust & corrosion-resistant..
  • Perfect Cutting: The plumbing inside cutter is not only great for cutting PVC pipe, plastic pipes and wood, but also for some soft metal pipes with the help of coolant or water to cool the hot saw blade..
  • Work Efficiency: This internal plastic ABS pipe cutter is suitable for most electric drills. Small but practical and portable, effective to cutting the PVC pipes from the outside and inside..
  • Safety Precautions: When use this plumbing tool cutter, please wear gloves and goggles to prevent the flying spark. Keep away from children. The maximum speed of the saw blade cannot exceed 20,000 rpm..
Check Stock

Concrete Saw 14 Electric Demo Saw Concrete Cutter 5800W Circular Saw with Blade and Pump Wet Dry Cutting for Concrete Marble Granite Light Bricks Wood 110V

  • 14‘’Adjustable Diamond Saw Blade: This electric concrete saw with a large-size sharp saw blade, maximum cutting depth is 5.3" with segmented axles....
  • Dry/Wet Dust Free Cutting: This circular saw is equipped with a water pump and water pipe fitting. The water pipe is used to supply water to the saw....
  • Flexible Concrete Saw : The flexible concrete cutter is equipped with 2 handles（4.7L”*4.7W）, the front handle can be rotated 180°, and the rear....
  • Built-In Copper Motor: 110v, 5800w motor adopts stacked height increase winding technology, which makes the motor power strong and does not consume....
  • Widely Use: The powerful electric cutting machine is suitable for indoor and outdoor use. It can be used for plumbing and electrical engineering....
Check Stock

Saw Hack - Hack Saw Cutting Plastic Pvc Pipe Saws - Hand

  • Package Content: you will receive 4 pieces of hand wire saws with 2 colors: red and black, 2 pieces for each color, which are enough for sharing,....
  • Size information: the rope saw measures about 80 cm/ 31.5 inches in total length, the length of the steel wire is about 60 cm/ 23.62 inches, and the....
  • Ideal PVC Pipe Cutting Tool: the PVC pipe cable saw can work for pipes that are in tight spaces, giving you a lot of convenience.
  • Quality and Sturdy: the wire saw is made of stainless steel, firm and strong, not easy to break.
  • And the grip party is made of rubber, so you do not....
  • Outdoor Survival Supplies: this survival wire saw fits nicely in a backpack and is ideal for cutting things like wood, plastic, bone, rubber, and soft....
Check Stock

VICSEC 8'' Electric Concrete Saw 4800W Wall Chaser Concrete Cutter for Brick, Concrete Wall, Granite, Marble, Tile with 8" Saw Blade, Water Pump, Water Hose

  • Considerate Designs: The water line provides water to the blade, decreasing dust. Secure cover blocks the flying objects during your operation. The rubber handles can aid accurate cutting in both horizontal and vertical modes..
  • 1800W Copper Motor: 1800 W motor with 3800 RPM running speed making the cutting fast and smooth. The motor features high-temperature resistance, sustainable operation, and no fumes. Thus, our 14"/356 mm circular saw is more efficient for your work..
  • Adjustable Cutting Depth: The bottom plate can be adjusted according to your different cutting depth requirements. Max Depth: 5"/130 mm. No need to use tools, they can be adjusted freely according to your needs..
  • Multi-function Concrete Saw: The 14-inch tile saw efficiently delivers the power to cut through granite, brick, porcelain, reinforced concrete, metal, cement, steel bar, wood, and other materials. It is perfect for factories, workshops, home, timber industries, and DIY..
  • Practical Accessories Kits: Our concrete wet/dry saw is supplied with a 14" diamond blade and different tools, including....
Check Stock

Freud LM74R010 10\ Industrial Glue Line Ripping Blade, Multi, One Size

  • 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade.
Check Stock

Mini Circular Saw, 4 Amp 4-1/2 Inch Compact Electric Circular Saw with Laser Cutting Guide, 24T Blade, 3500RPM Small Circular Saws, 0°-45° Adjusted, Max depth 48cm, Perfect for Wood and Plastic Cuts

  • ... ️【What You Get】1 * Mini Circular Saw, 1 * 24T Saw Blades, 1 * 60T Saw Blades, 1 * Diamond Blades, 1 * Vacuum Cleaner Adapter, 1* Dust Exhaust Pipe, 1 * Hex Wrench, 1 * Scale Ruler, 1 * User Manual. If you are not satisfied or have any question ,please feel free to contact us. 24h on line..
Check Stock

Dremel MM722 Flat Blade Kit

  • Dremel Multi-Flex saw blades are great for straight cutting of a variety of materials including wood, PVC, and copper pipe.
  • This product is easy to use easy to install and highly durable.
  • Saw Blade Kit (3) - General straight cutting of a variety of materials (wood, PVC, copper pipe).
Check Stock

Windspeed 1+5Pcs Inside Pvc Pipe Cutter, Internal Pvc Pipe Cutter for Plumbing Inside Cutter with1/4\ Hex Shank, 5 Inside Pvc Pipe Cutter Replacement Blades (32/32/ 35/44/ 48 mm)

  • ❤【Perfect Combination】: This set includes PVC pipe inside cutter+4 pcs metal cutter blades(32/32/35/44 mm)+1 pcs grinding wheel(38 mm). It has complete accessories, which can help you cut various types and sizes of PVC pipes. It is one of the indispensable tools for home renovation..
  • ❤【Fast Cutting】: This inside pipe cutter blade a deep, dense, and sharp tooth marks, which can help you easily cut PVC pipes, plastic pipes, density boards, and aluminum pipes. At the same time, the cutting planes are smooth and flat after cutting..
  • ❤【easy to use】: After selecting the inside cutter for pvc with the proper size and connecting the electric drill, you can cut the pipe from the inside or the outside. The grinding wheel can also help you grind the plane after cutting. (Cooling liquid or water shall be used for cooling during cutting to prevent the saw blade from overheating).
  • ❤【Well Made】: The handle of the internal plastic pipe cutter is made of heavy carbon steel, with high hardness, and strong wear resistance, and is well made. The inside pipe cutter blade is made of HHS material, which is sturdy and durable, with sharp tooth marks and excellent cutting ability. (To better preserve the saw blade, a layer of protective oil is added....
Check Stock