Top Saws Holesaws Hss

FOXBC 62\ x 1/2\ x 14 TPI Band Saw Blade Fits Craftsman, Delta, POWERTEC, Ryobi, Wen, Skil 9\ Bandsaw Metal Cutting

  • 62-Inch x 1/2" X 0.025 X 14 TPI Band Saw Blades for Metal Cutting.
  • Fits all band saws requiring a 62" long 1/2" wide blade.
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring 62" long 1/2" wide blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock

Hole Saw 6 1/8” (155mm) for Wood, HSS Bi-Metal Hole Cutter with Pilot Drill Bit for Plywood, Cornhole, Ceiling and Drywall

  • ⚙️【HOLE CUTTER】The HSS hole saws are perfect cutting tools for installing recessed light into ceiling, for punching a big hole at wall to fit a vent pipe or an extract fan，and also for cable installation..
  • ⚙️【SHARP TEETH】The bi-metallic cutting teeth is layered with high speed steel, that increases their hardness and durability, and gives the hole saw excellent cutting ability to punch a clean hole..
  • ⚙️【ACCURATE CUTTING】 The increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide faster and accurate cutting than standard hole saws, the diameter errors of the cut hole are less than a millimeter..
  • ⚙️【MORE EFFICIENCY】The slug holes around the saw are able to remove the wood chips while cutting, reduce friction heat, improve the efficiency. And the due to the fact that less of total amount of material is actually cut, much less power is required, longer battery life of power tools is benefited..
  • ⚙️【TRUST to PURCHASE】 Provide 60 days free return and replace service to make sure our customers’ sat....
Check Stock

Luomorgo 4.5 inch Hole Saw 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting....
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • Widely Used: Hole saws can cut 4-1 / 2 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In....
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a....
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want....
Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

  • 12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
  • One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
  • NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
  • 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
  • ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.
Check Stock

Dewalt DT7926-XJ Metal drill bit-Set (29 Piece) HSS-G

  • Small, compact and Durable, with this Wellcut pack, you get a lot of everything..
  • From Holesaws, drill bits for 3 types of material to countersink bits..
  • All encased in a robust shell with Click-Lock System..
Check Stock

COMOWARE Bi-Metal Hole Saw Kit for Metal Wood PVC Board - 3/4\ to 2-1/2\ Set with 2 Mandrels & Spare Pilot Drill, 19 Pcs

  • ...-metal hole saw consist of two different tool steels (bi-metal). The main body consists of a special flexible steel and the teeth that cut the material are made of HSS..
  • SUPERIOR PERFORMANCE: The varied and fine toothing ensure that the hole saw does not get caught in the material and runs smoothly. Bi-metal hole saws have a larger number of cutting edges than carbide hole saws, which allow a clean cut..
  • WIDELY AND PROFESSIONEL USE: It is your ideal choice for DIY projects and household maintenance and repair. Suitable for metal, normal wood, thin PVC board, plastic..
  • SIZE INCLUDES:10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for needs in different situations, 1 x Spare Pilot Drill for replacement, 1 x Large Mandrel, 1 x Small Mandrel with Medium Adapter and 1 x Plastic Case for easy storage. The set includes the most popular hole saw sizes on the market to meet your different demands..
  • EASY ORGANIZATION: Set includes the hole saw kit holder with size index for easy storage and organizing. It is designed to keep all components organized and convenient to take..
Check Stock

HORUSDY 25-Piece T Shank Jig Saw Blade Set, Made with HSS/BIM/HCS, T-Shank Blades for Wood, Plastic and Metal Cutting

  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models..
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting..
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal..
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal..
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。.
Check Stock

ZOENHOU 2 Set 3 Inch 75 mm Hole Saw with Arbor, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter, Hole Drilling Tool Drill Bit Saw for Cutting Wood, Metal, Plastic, Fiberboard

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi-metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.43 inch hex shank arbor with two pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL- This complete HSS hole cutter including 2 pieces 2-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.43 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 3 Inch 75 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Qjaiune 25mm/1″ Carbide Hole Saw Drill Bit Heavy Duty TCT Hole Cutter for Stainless Steel, Sheet Metal, FRP & Wood

  • High quality material: This 1in hole saw is made of Tungsten Carbide (TCT hole saws), especially design for cutting alloy and stainless steel materials, extremely durability for any tough material, at least 10 times longer life than bi-metal and HSS hole cutters.
  • Smooth & clean cutting: The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws, cuts quick, precise holes in a variety of materials.
  • All in one design: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works, make your job more convenient and easier.
  • Application: usage on home and industrial plants, such as in heating, ventilation and air conditioning demand an enduring hole saw that delivers a precise cut into high quality stainless steel..
  • Purchase Guarantee: Please rest assured to buy our hole saw. If you are not satisfied with the product, we provide a 100% money back guarantee within 90 days.
Check Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..
Check Stock

ETERNA 246piece Drill Bit Set Titanium HSS Screwdriver Bit Kit, with Carry Case for Metal, Masonry, Wood, Plastics Cement Drilling

  • Full set includes 87 X HSS4241 twist drills, 21 X masonry drill bits, 4 X spade bits , 1 Xspade bit extension 17 X Brad point drill bits,4 X drill stops, 66 X 1inch bits, 30 X 2inch bits, 6 X nut drivers, 2 X hex keys, 1 X counter sink, 4 X hole saws, 1 X arbor adaptor, 1 X nail punch and 1 X bit holder..
  • Suitable for drilling into masonry, wood, metal and plastics and multiple screwdriving and fastening applications..
  • With a wide range of bit sizes and includes the most essential tools of drill bits, screws, a countersink, and more, which will help you get professional results on your next home improvement or DIY project..
  • The drill bit set comes with a portable carry case with a handle on it, which allows for easy transportation.It is designed to keep all components organized and convenient to store..
  • HSS titanium drill bit is coated with titanium on its surface, which increases the hardness of the drill bit, meanwhile strengthens heat dissipation, makes the twist drill bit more wear-resisting. Other parts are made of high quality high speed steel, which features high hardness, good wear resistance and durability. It can be used multiple times without deformation.
Check Stock

AVID POWER Drill Bit Set, Drill Bits for Metal, Wood, Masonry-100Pcs Titanium, High Speed Steel Drill Bit Screwdriver Bit Set with Storage Case

  • All-in-one Convenience: The AVID POWER 100-piece drill bit to work on a wide range of projects, this drill bit set is made for wood, metal, masonry, and plastic drilling as well as multiple screw driving and fastening applications..
  • Long Life and Added Durability: High-speed steel titanium drill bits run cooler, drill smoother, and last up to three times longer than your standard drill bit set. Size and dimensions are marked on the drilling surface for easy identification..
  • Widely Use： A wide assortment of bits to face numerous jobs. 14 HSS drill bits, 9 wood drill bits, 9 masonry drill bits, and 56 screwdriver bits in a wide variety of sizes among other tool accessories to create a complete, all-inclusive drill bit kit. great for household and furniture repair..
  • Well Organized: The most popular sizes for common jobs with a storage case, easy to carry. Each drill slot is engraved with the correct dimensions for quick identification and avoids clutter..
  • What's Included: HSS drill bits*14, Wood drill bits*9, Masonry drill bits*9, Screwdriver bits*56, Spade drill bit*3, Hole saws*4, Nut driver bits*4, Countersink*1, Screwdriver bit holder*1.
Check Stock