Top Scope Mount

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 20 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 0 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Monstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter

  • Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Tutengelctri 1 Scope Mount 2Pcs High Profile Scope Rings for 11mm Dovetail Rails

  • ▄︻┻┳═一 Double scope ring mount for 11mm dovetail mounts, specialized scope mount for .22/Airgun. Not for AR rifle..
  • ▄︻┻┳═一 Scope Rings Type: High Profile (0.8inch),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount.
  • ▄︻┻┳═一 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy & high strength steel in....
  • ▄︻┻┳═一 With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment. Scope rings are for standard....
  • ▄︻┻┳═一 Lifetime Warranty: 100% Satisfaction Guarantee.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Short Action | 0 MOA

  • Picatinny rail mount built specifically for Short Action Remington 700 rifle platforms.
  • Compatible with Short Action Remington 700 models only including: 223 Remington | 243 Winchester | 308 Winchester | 6.5 Creedmoor | 7 mm Remington Mag | 7 mm-08 Remington | 257 Weatherby Mag | 270 WSM | 22-250 Remington |300 Remington Ultra Mag | 300 AAC Blackout | 220 Swift.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Scalarworks Lightweight Ultra High-Performance QD LEAP/Scope Mount, 30mm, 1.57' Height

  • COMPATIBILITY: Rifles with MIL-STD-1913 Picatinny Rail.
  • ULTRA HIGH-PERFORMANCE SCOPE MOUNT: Designed for shooters who want the lightest, most rigid, easiest to use, and least obtrusive quick-detach scope mount possible.
  • LEVEL HEADED: the Leap includes our proprietary leveling screw to help you conveniently square your scope with your mount.
  • LIGHT MADE RIGHT: engineered to be the lightest QD scope mount, without compromising an ounce of strength.
  • QUANTUM QUICK-DETACH MECHANISM: Quantum Quick-Detach mechanism is completely recoil proof, while requiring only enough torque to firmly clamp onto a Picatinny rail.
Check Stock

HIRAM Dual Ring Offset Cantilever Scope Mount with Quick Release and Integrated Recoil Dampeners for Picatinny Rail, 30mm

  • QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple installation and swapping of your scopes.
  • DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy.
  • the torx screws are also heat-treated for added stability and strip prevention.
  • LONG RANGE: Hit your target from hundreds of yards away since our scope mount's tilt angle allows you to zero in your gun at a greater distance for precision long-range shooting.
  • CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and increased field-of-view.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the market.
  • we back these rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come.
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock