Top Scope Rings Inch Silver

Burris 420180 Xtreme 1" Tactical Aluminum Scope Ring Set (Two Rings) for Picatinny-Style Mounts, Six Hole, Low 1/4 in. Height, Matte Black

  • ... withstand any amount of recoil and multiple uses due to its strong performance.
  • FITS MOST WEAVER/PICATINNY-STYLE MOUNTS: Built with performance in mind, this set includes 2 pieces of low-profile rings that fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
  • suitable for all 1-inch / 25.4mm scope tube.
  • VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
  • this will hold any other 1" accessories that you might want to mount.
  • EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
  • the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
  • LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively lightweight compared to larger-sized rings which are particularly beneficial for those who need to carry their gun over long di....
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

MIZUGIWA 1 Inch Scope Mount Rings High Profile 11mm Dovetail See-Thru

  • 3/4 inch gap between tube and top of rail.
  • With four screws Design, Double stability.
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | Low Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | High Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

FENTUK 1

  • 2 Pack FENTUK Scope Ring Adaptors With Picatinny Rail- 1 Inch & 30mm ring with picatinny top rail provides a solid mounting platform for adding an additional backup sighting tactical accessories to your rifle scope. Four screws on this ring ensure that the back-up sight will hold zero shot after shot, provide dependable long-lasting durability..
  • Fit for 30mm & 25.4mm Scope Tube- Our rifle scope ring adapter with picatinny style, each ring with circular hard gasket design, the diameter of the ring from 30mm/1.18 inch to 25.4mm/I inch, effectively switch between two sizes, perfectly meeting your different needs!.
  • 4 Slots Picatinny/Weaver Top Rails- Top 4 Slots 1.77" picatinny rail design, allowing you add on standard 21mm Picatinny or Weaver accessories, such as tactical flashlight, laser scope sight, red dot sights, micro red dot, backup/second laser sights, optics and other accessories..
  • High Quality Aluminum, Solid & Durable- Precision machining of aircraft grade aluminum alloy in black matte anodizing finish. Sturdy & durable, lightweight & compact construction, offer stable safe performance in the field. Item size: 1.77"L x 1.72''W x 1.70''H, item weight:1.38Oz/1 pcs..
  • Easy To Install & Remove- Our Scope Ring Barrel Mount is easy to install or remove ....
Check Stock

kemimoto 2Pcs R-ifle Scope Rings 1 Inch Pica-tinny Aluminum Tactical Sporting Optic Rings Rail Optics Mounting Kit Black Solid Steel Shooting Hunting

  • 【SIZE AND SHAPE DESIGN】:2 Pieces 1 inch Solid scope rings which made with solid steel material,.
  • 【SEMI-SEPARATION DESIGN】：Unlike 6 screws which need to screw with allen wrench which takes a lot of time. Our scope rings with semi-seperation design so that you just need to screw two srews with allen wrench to lock the rings.It will save your time and lock up your scope solidly.
  • 【STAR NUT DESIGN】：The install of tactical scope rings was extremely easy and design with the star nut so you can use hand to screw the rings onto your Pica tinny rail easily.
  • 【COMPLETE ACCESSORIES】:The scope rings comes with extra 4 screws.
  • allen wrench and installation instruction in the package to make installation a breeze.
Check Stock

Gotical Ruger 10/22 Weaver and 3/8" Dovetail Mount Dovetail Predrilled Receiver Rail Mount Adapter (Black) (Pack of 1)…

  • GOTICAL Ruger 10/22 Weaver and 3/8" Dovetail Mount Dovetail Predrilled Receiver Rail Mount Adapter (Black).
  • This Ruger 10 22 silver scope base mount with screws is lightweight Weaver/dovetail scope mount.
  • scope mount is dual purpose base for the Ruger 10/22 it can take both Weaver and 3/8" dovetail rings.
  • Fits the pre drilled holes on top of your 10/22 rifles receiver and it is easy to install.
  • Made from Black anodized aircraft grade aluminum. Accepts all standard 3/8" Dovetail, Weaver / Picatinny 1913 rings.
Check Stock

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Fidragon Scope mounts Scope Rings QD Scope Mount Ring Riflescope Rings 1 inch Scope Mount 2 Pcs

  • A good set of Quick release rings. Riflescope Rings 1 inch Scope Mount 2 Pcs.
  • the quick release function on each ring as long as the scope stays mounted to the rings..
Check Stock