Top Scr Motor Drive

Prime Guard PRIM00250 DEF Diesel Exhaust Fluid - 2.5 Gallon

  • Prime Guard DEF is a safe, environmentally friendly solution for Selective Catalytic Reduction.
  • Prime Guard DEF meets the stringent ISO 22241, AUS 32 and DIN 70070 standards for purity and concentration.
  • Prime Guard DEF is an ultrapure, formaldehyde-free, NOx reducing treatment specifically formulated for diesel engines equipped with SCR systems.
  • Prime Guard DEF is API certified, guaranteeing the quality and suitability for proper SCR operation.
  • Prime Guard DEF 2.5 Gallon single-pack box includes a dispensing nozzle for an easy pour.
Check Stock

Electronic Longboard Hub Motor Kit Skateboard Brushless Motor Wheel with Truck Electric Board Dual Motor Drive Remote Controller Dual Drive

  • Material: The wheel hub motor that drives the skateboard is made of PU,aluminum and iron materials,with a very long service life.
  • Strong Power: The wheel hub motor drive kit adopts an outer rotor brushless motor,which is faster and not easy to heat up.
  • Shock-absorbing Wheels: Drive skateboard wheel hub motor kit PU wheels have good elasticity and shock absorption.
  • Reliable: Single-drive skateboard wheel hub motor has stable characteristics,sturdiness and durability.
  • Compatibility: Electric skateboard wheel engine remote control is suitable for all skateboards with a board length less than 910mm.
Check Stock

AMRA-37180 AFI 1000 Waterproof Wiper Motor w/ 2.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

AMRA-36180 * AFI 1000 Waterproof Wiper Motor w/ 1.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

Makita GA4542C SJSII High Power Angle Grinder, 4-1/2'

  • Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000) RPM.
  • SJSII provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration.
  • SJSII provides a mechanical gear drive to help prevent motor and gear damage by dampening the force on the gear when the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic Controller is a three-part electronic feature designed to provide the required power in high torque applications for increased tool life.
Check Stock

ACDelco GM Original Equipment 10-4023 Diesel Exhaust Emissions Reduction (DEF) Fluid - 2.5 gal (Pack of 2)

  • Meets GM Original Equipment specifications to be approved for use in GM vehicles as well as in non-GM diesel vehicles that have an SCR (Selective Catalytic Reduction) system to meet regulated NOx emissions.
  • High quality formula is made from high purity urea and deionized water. It contains no chemical additives or other components that could cause SCR system failure.
  • Includes vented nozzle(s) that make pouring easy by helping to prevent glugging.
  • Has 1 complimentary nozzle. Extra nozzles sold separately.
Check Stock

Alfa Wheels Electric Scooter Motor Currie Technologies 24 Volt 500 Watt DC for 500 Series Schwinn & IZIP Reversible with 11 Tooth Sprocket #25 Chain Model Numbers XYD-6B SD-156 XYDJ130601664

  • APPLICATIONS: This electric scooter motor from Currie Technologies can be used for scooters, for Mini Bikes quad and Go-Karts using 450W or 500W motors with similar mounting brackets., for bicycles and for do it yourself enthusiasts who would like to use it for diverse applications. This motor should work with Schwin and IZIP 500 series electric scooters. This electric motor should also work with any other brand with similar specs..
  • MOTOR SPECS: Model XYD-6B Motor, Type Brush, Voltage 24 Volt DC, Output 500 Watts, Rated Speed 2600 Rpm, Rated Current 28 Amp, Sprocket #25 Chain 11 Tooth, Rotation Reversible, Removable Set-Screw Sprocket, This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires..
  • COMPATIBILITY: Currie Technologies part number SD-156, OEM motor on 500 Series Schwinn & IZIP electric scooters (chain drive) compatible with eZip E-500, GT-500, IZIP I-500, Mongoose M500, Schwinn S500..
  • DIMENSIONS: Case Length 3-7/8" (98 mm), Case Diameter 3-15/16" (100 mm), Drive Shaft Length 1/2" (13 mm), Drive Shaft Diameter 3/8" (10 mm), Mounting Hole Distance 3-15/16" (100 mm), Center to center mounting hole distances approximately 3-7/8.
Check Stock

Gdrasuya10 1000W Electric Motor Brushless Motor, Electric Scooter Hub Brushless Motor for 10 inch Electric Scooter Front/Rear Drive

  • Drive type: front drive and rear drive available..
  • ★The in-wheel motor has tires, which is strong and durable..
  • ★Pure copper motor core. Easy to use and install..
  • ★Suitable for 10 inch electric scooter, 1000W power..
  • ★If you have any questions about this motor, please feel free to contact us, we will reply you within 24 hours..
Check Stock

WALKINGBELTS Epic A30E Elliptical Drive Belt EPEL129122 / EPEL12912.2

  • Part Name: Drive belt - Motor Belt - Bike Drive Belt - Elliptical Drive Belt.
  • "Need a different size motor belt? ...we can help, contact us for more information.".
Check Stock

OTR Performance Heavy Duty Diagnostics | Volvo Construction Equipment 2015-2020 Force DPF Regen Reset aftertreatment System Clear Active and inactive Fault Codes

  • Start a forced DPF regen When the soot level is too high for a passive or active regen to occur..
  • Reset Active Fault Codes Fault codes that determine that there is an existing issue..
  • Reset Inactive Fault Codes Fault codes that indicate that there was a previous issue..
  • Reset DEF / SCR derates DEF/SCR derates have stored values in the engine control module and aftertreatment control module (ECM/ACM)..
Check Stock

OTR Performance Heavy Duty Diagnostics | Volvo Construction Equipment 2011-2014 Force DPF Regen Reset aftertreatment System Clear Active and inactive Fault Codes …

  • Start a forced DPF regen When the soot level is too high for a passive or active regen to occur..
  • Reset Active Fault Codes Fault codes that determine that there is an existing issue..
  • Reset Inactive Fault Codes Fault codes that indicate that there was a previous issue..
  • Reset DEF / SCR derates DEF/SCR derates have stored values in the engine control module and aftertreatment control module (ECM/ACM)..
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock