Top Screw Gun Drill

10L0L Universal Gun Holder for EZGO Club Car Yamaha Golf Cart, Compatible with UTV, Stand Up Gun Rack Floor Mount with Quick Release

  • Wide Compatibility - Universal gun rack/holder for EZGO, Club Car, Yamaha, and most golf carts, also compatible with UTV..
  • Firm Protection - Non-slip rubber pad & velcro straps for security and preventing guns from sliding off, no obvious vibration when the vehicle moves on bumpy roads..
  • Rotatable Design - The adjustable bracket enables the gun holder to rotate up to 50 degrees to make sure it won't affect driving..
  • Easy Installation and Removal - Separate the mounting plate from the gun rack, and then drill holes for the screw kit to install the mounting plate to the recommended location of your vehicle. You can remove the gun holder quickly in minutes if necessary..
  • Made of durable steel with a smooth black finish, durable and rust resistance. Size: 34.4" x 8.6" x 5.9"..
Check Stock

4 Pack Railroad Spike Gun Rack Hanger Hook Holder Handmade Wall Mount, Fit for Shotgun Rifle Hunting Western Decor Blacksmith, Wall Decor, Western Rustic Hook Gun Rustic Gun Gifts

  • ...urable. The hook of the gun hangers are felt lined with a very soft durable black felt. Durable and wear-resistant. Prevent your fine firearm or swords from scratching or slipping..
  • 【Simple Installation】 Easy to install with all the hardware. Simply drill the hole where you desired. Install drywall anchors. Screw in the screws and you’re ready to go. Save your place for display your rifles or shotguns..
  • 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty..
Check Stock

Tap Extractor - Steel Broken Head Taps Remover Stripped Screw Tap Extractor Set(10件套)

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

IRWIN Drill Bit, 3-Cutter, Self Feed, 2-Inch (3046010)

  • Drill bits have 3 cutting edges that are hardened for durability and long life in tough materials.
  • Replaceable screw-point tip pulls the drill bit fast for clean, true holes.
  • 7/16-inch hex quick-change impact shank reduces slipping in standard chucks.
  • IRWIN drill bits are compatible with most 7/16-inch impact drills.
Check Stock

Keenkee 4 Set Magnetic Door Catch and Latch, Cabinet Magnets Hardware for Kitchen, Closet, Cupboard and Other Furniture Doors and Drawers Closer, Closure Closing, Black Tone Gun Metal Color

  • 【4PCS PACK】 Pack include 4 pcs magnet catches, 4 pcs Iron Spur Plates and 5pcs hardened wood screws (1 pcs spare).
  • 【GUN METAL】 Black tone Gun Metal has great metallic feeling and wide range color match with furniture.
  • 【SPUR PLATE】 Iron Spur Plate has flat round surface which perfect for the round magnet catch. Suggest Drill Ф3mm diameter 5mm deep lead hole and then punch the Spur Nail into wood or board..
  • 【MAGNET】 This magnetic door catch houses magnet to hold Furniture doors or drawers firmly..
  • 【 INSTALL 】 Only 1 pcs wood screw is needed to fix the base. The base has Rib on bottom so it’s not easy to swivel when you tight the screw. Oblong hole also makes it easy to be adjusted back and forth..
Check Stock

TOOLEAGUE Magnetic Nut Driver Set for Impact Drill Cr-V Steel 1/4\ Quick-Change Hex Shank 17 Piece Metric/SAE Screwdriver with Storage Bag

  • High Quality: The impact driver bit is made of Cr-V steel, which has higher shock resistance and hardness. The surface is blackened by manganese phosphate, which has the ability to resist wear, oxidation and corrosion..
  • STRONG MAGNETIC FORCE: The drill sockets powerful magnetizer design can strengthen the safety lock and hold of the drill bit during the application of nut and bolt fasteners. Each magnet is tightly installed, and the magnet is not allowed to fall..
  • POWER NUT DRIVER BITS: metric magnetic nut driver set, metric: 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm. SAE: 1/4″,11/32″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″,( 1pc of each), Each mounter size is clearly engraved on the side for easy identification.Also includes 3 Pcs drill extension rods..
  • QUICK-CHANGE: The nut setter master set is suitable for quick chucks and any drill or driver, electric screwdriver, socket wrench, pneumatic impact wrench, cordless electric drill, screw gun, etc..
  • PACKAGE CONTENT:The Nut Driver Socket with a storage bag, which is convenient for storage and carrying. It is widely used in household DIY, auto parts, woodworking, professional machine repair, etc..
Check Stock

Gifts for Men - Damaged Screw Extractor Kit Stripped Screw Extractor Set DIY Hand Tools Gadgets Gifts for Men Broken Bolt Extractor Screw Remover Sets

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

  • Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
  • Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
  • Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.
Check Stock

Broken Screw Extractor set Stripped screw remover Easy out bolt extractor set Left hand drill bits 11PCS Screw remover and extractor Grabit pro screw extractor

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

COMOWARE Impact Screwdriver Bit Set with Titanium Drill Bits - Quick Release Twist Drill Bit Set with Tough Case, Impact Driver Bit Set Total 35Pcs

  • ...ish, with high hardness, high hardness, good wear resistance, which is also resistant to rust. Drill Bits are classic HSS construction with titanium coating for capability and durability. .
  • 【Hex Shank & Quick Change】: Hex shank fit quick-change and lock firmly in standard chucks, suitable for any drill, driver, screw-gun, etc. Great for the DIY, household maintenance, and most general repairs..
  • 【Complete Specifications】A complete set of screwdriver bits and titanium drill bits which is most commonly used. Anytime ready to satisfy your different needs..
  • 【Wide Applications】Our drill bits set can be widely used on electric screwdrivers, hand screwdrivers, cordless drills, electric drills, air drills and so on. The bits are also impact-rated and for use in ¼” hex impact drivers (sold separately)..
  • 【HSS-Ground Titanium Coating】Classic HSS construction with titanium coating to sustain long life. The cutting edge is hardened and honed for drilling accurate and clean holes in metal, wood and plastic, Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel..
Check Stock

IMScrews 50pcs #8 x 1 Stainless Flat Head Phillips Self Drilling Screws 410 Stainless Steel Full Thread Sheet Metal Tek Wood to Metal Screws

  • DIMENSIONS: Diameter: #8(4.2mm) | Length: 1"(25mm) | Thread Type: Coarse (standard) | Material: 410 Stainless Steel | Head Type: Flat Head Phillips Drive.
  • PACKAGE: 50 pcs in a pack. Packed in a rugged convenient re-sealable plastic storage bag which is printed with IMSCREWS trademark and Slogan “Good Tools for Good Works, IMSCREWS Fix Your Home”..
  • HIGH-STABILITY: Screws are made from high-quality 410 stainless steel with superior anti-rust, corrosion resistance making it last longer than other hardware. Sturdy and durable, works well with a screw gun. Flat head style allows fastener to sit flush to the surface..
  • FULLY THREADED: Countersunk stainless steel self-drilling screws with fully threaded for Excellent Retention Use self-drilling screw to fasten materials to aluminum or sheet metal..
  • IMSCREWS high-quality 410 stainless steel flat head Phillips self-drilling screws package. Screws with a drill point are enable to cut through sheet metal or steel material with no need to pre-drill a pilot hole. The screws are ideal for your home, office, or industrial workplace. Suitable for both indoor and outdoor applications..
Check Stock

14Pcs Power Nut Driver Drill Bit Set, 1/4” Hex Socket Adapter Bolt Drivers Repairing Tool Kit, Suitable For Quicker Change Chuck, Electric Screwdriver, Hand Drill, Pneumatic Drill, Lithium Drill

  • QUICK CHANGE - Universal 1/4'' Hex Shanks Fit Quick-Change/Release and Firmly Lock of Standard Chucks , Drill, Driver and Screw-Gun. Applicable for Installing in Those Hexagon Tools, Such as Pneumatic Screwdriver, Electric Screwdriver, Pneumatic Drill, Electric Drill, Pistol Drill, Manual Screwdriver and More.
  • HIGH HARDNESS & CORROSION-RESISTANT - Each Setter is Made From High Quality Chrome Vanadium Steel for Extra Durability for Resistance Against Abrasion and Corrosion..
  • EASY STORAGE - Come With Storage Organizer to Keep The Pieces Together, Easier for Carrying And Organized Storage. Here’S The Can’T Missed Option for You, Your Family and Friends. Nut Driver Makes The Project Much More Easier and Faster, Makes The Life More Great. Each Nut Setter is Laser Engraved in a High Contrast and Easy to Read Marking so You Never Have to Play Any Guessing Game While Selecting The Proper Size for Your Application..
  • WIDE RANGE OF USES - Universal 1/4 Inch Hex Shanks Fit Quick-Change Chucks and Any Drill or Driver, Electric Screwdriver, Socket Wrench, Pneumatic Impact Wrench, Rechargeable Drill, Screwgun and So on. Really Hel....
Check Stock