Top Screw Jack

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor....
Check Stock

BAOSHISHAN 4 Ton Bottle Jack Double Ram 6-1/4\ to 15-3/8\ Lifting Range Hydraulic Jack Car Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 4 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/8"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 4 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or ma....
Check Stock

BAOSHISHAN 3 Ton Double Ram Bottle Jack 6-1/2\ to 16-1/2\ Lifting Range Portable Hydraulic Jack with Carrying Case

  • [HIGH LIFT] - This high lift bottle jack have a double ram design with extension screw. The car jack fully extends up to 16.54" on the basis of constant capacity and volume. The double extending ram makes it easy to put the jack in place and it extends enough to easily raise the high clearance cars..
  • [DOUBLE RAM] - The double-ram design means you can get it into places where a traditional 2-4 ton jack would fit, but you have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height. Combined with the extension screw, this fully extends to over 16 inches (about 10" of total lift)..
  • [WITH CARRYING CASE] - The bottle jack with case is easy enough to store away in the vehicle or garage. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it. And the color of the compact box is random, BLACK or GRAY..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack to lift cars. It allows the hydraulic jack to be adjusted to accommodate desired work height. The diameter of the top is 0.8 inches..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 ....
Check Stock

Auto Jack Ratchet Handle, Auto Labor-Saving Jack Ratchet Wrench with Long Handle, Scissor Jack Lift Speed Handle Tool Jack Lug Handle Tool Tire Wheel Jack Wrench, Universal 360° Swivel Car Repair Tool

  • Jack Screw Set: With a weight capacity of 1000 pounds, the bases can be stacked and combined for cylindrical applications or narrow edges and slots.
  • Extendable Base: Includes 1" and 2" extension bases that can be combined.
  • adjustable with the pivotal top or a single contact point extension.
  • Dimensions: Machinist jack screw set has a range of 2.25" to 3.375" before extension use.
  • Set Includes: Screw jack set includes screw jack, two optional bases, 1" and 2" extension, locking bar, optional support and fitted case.
Check Stock

BAOSHISHAN 3 Ton Bottle Jack Double Ram 6-1/2\ to 16-1/2\ Lifting Range Hydraulic Jack Car Jack Welded Bottle Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 3 ton bottle jack. You have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height..
  • [BETTER RANGE OF MOTION] - The 6-1/2" starting height allows small bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 16-1/2"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 pounds, the compact bottle jack with high-quality alloy steel structure to ensure qua....
Check Stock

ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)

  • ...max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
  • √Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
  • Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
  • √SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use..
  • √MATCH MOST VEHICLES:The electric jack kit 's two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows any adult to change and repair tires at any time on the garage/highway,best choice for your car, truck or SUV.....
Check Stock

K Tool International 22 Ton Blue Air Hydraulic Truck Jack Welded Pump Wiper Seal on Ram 3 Adaptors Air Pressure 100-120 PSI KTI63197

  • [22-TON CAPACITY] - K tool International hydraulic jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 8 2/3".
  • [WIPER SEAL] - Wiper seal on the ram for longer life in extreme environments.
  • [RELEASE KNOB] - Release Knob At the Top of the T Handle Works At Any Handle Position. 3 handle positions allows for easy storage and jack positioning.
  • [STRONG/DURABLE] - Heavy duty truck jack has a welded pump and reservoir for added strength and durability. Heat treated extension screw for extra....
Check Stock

Poyiccot 3.5mm Speaker Wire Adapter, 3.5mm (1/8") 4 Pole Stereo TRRS Male Jack to AV 4 Screw Terminal Block Balun Connectors Cable 30cm (3.5mm M/ 4pin)

  • Speaker Wire to 3.5mm Cable with Connectors 1: 3.5mm 1/8" TRRS (4-Pole) Male jack, Connectors 2: AV 4-Pin Screw Terminal Block jack,please note: Did not when when attached to wifi projector.
  • 3.5mm screw terminal cable,connecting single wires with open cable heads to your 3.5mm jack..
  • 3.5mm 1/8'' trrs cable, it has four total conductors - three signal and a ground as opposed to a more common stereo jack's two..
  • No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. Wiring diagram: PIN 1 - red wire.
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • 3.5mm trrs plug cable is more convenient to use more quickly without welding, and you can use the 22-18 gauge to connect..
Check Stock

Mautyke Electric Car Jack Kit 2 Ton Auto Scissor Jack Lift Portable Air Floor Jack Tire Jack Vehicle Repair Tool Quick Car Lift with Carrying Case

  • ...d place it in the direction parallel to the car.②Keep away when the jack is working.③Do not exceed the max. load capacity. Using GuideStep 1: Get power from the car, connect the cable (make sure the positive and negative poles are correctly matched, otherwise there will be button failure, abnormal noise or screw bending). Step 2: Choose the right jack head. Step 3: Press the (^) button to lift the car and the (v) button to lower it..
  • Best Choice for Tire Change: This electric car jack is made of cold-rolled steel which has excellent bearing capacity, it has also been updated with an extra-wide base and reinforced solid screw rods to avoid being cracked or twisted. This electric floor jack also features a bright built-in LED light, which makes changing tires much easy in the dark. 2 heads fit both sedans and SUVs of different chassis heights, vehicles under 2 tons can be lifted easily..
  • Safety Guarantee: When the car jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the jack head can increase the friction. The self-locking structure of the jack can prevent the car from falling suddenly and ensur....
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • ...rom stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to corrosion.
  • CONVENIENT STORAGE: Heavy-duty plastic blow-molded case provides convenient organization and easy transportation.
  • The 10 x 5.2 x 2.8 inch (25.4 x 13.2 x 7.1 cm) carrying case features lock latches for safe storage.
Check Stock

BESTOOL Hydraulic Welded Bottle Jack, 20 Ton (40,000 lb) Capacity, Hydraulic Jack with Anti-Leakage Design Structure, Black

  • Bottle jack 20 ton engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks.
  • BESTOOL jack is tested for safety. Built-in oil-bypass and secure valve will automatically protect jack hydraulic system when overload.Keep Red bottle jacks from being damaged and keep you safe..
  • Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity.
  • Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 2-3/8".
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits,Car jack surface paint is oil-proof and anti-corrosion.Easy to clean.
  • Hydraulic bottle jack designed for residential and commercial use that can be widely used for sedans, suv, travel trailer, station wagon, mini bus.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
Check Stock

Skelang 2 Pcs Racing Jack Caster Wheel with 12mm Stem for 3 Ton Floor Jack

  • This jack caster is made of steel, durable and solid in construction.
  • The jack caster measures 2-3/8" in wheel diameter, 3-3/8" in mounting height.
  • stem size measures 12mm x 7/8" (Dia. x H).
  • Compatible with 3 ton rated floor jack with 12mm mounting holes (Please check the size before order).
  • Package includes jack casters, washers and nuts.
  • it's easy to screw the caster onto the floor jack.
  • It's great to replace old, worn or damaged casters on the floor jack, making the floor jack roll around with ease.
Check Stock