Top Screw Pilot Hole Drill Bits

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • ...TG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, professional FTG Maximum To....
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shan....
Check Stock

5PCS 1/4' Round Shank Titanium Plated Wood Hole Drilling Bits Set Screw Carpentry Chamfer Hole Opener Set Woodworking Screw Cap Taper Hole Drill Punch Tools #6#8#10#12#14, Muye

  • 6 Pieces Set:5PCS round shank drill bits for drilling pilot holes for screw.
  • sizes#6 #8,#10,#12 and #14 and 1 hex wrench..
  • Special Designed: HSS steel counter sleeve countersinks & counter bores pilot hole, adjustable counter sleeve depth with allen wrench..
  • Very Sharp : Super sharp cutting flute clears chips efficiently and leaves a clean & smooth hole..
  • Easy to Use: Adjustable drills length for various length screws simply by loosening and tightening the screw..
  • Function: Pre-drilling and countersink to drive screws flush with the material surface or deep hole counter boring for driving screw heads below the surface..
Check Stock

Drill Hulk 7-Piece M35 Cobalt Left Hand Drill Bit Set for Removing Damaged Bolts and Screws, 5/64-Inch, 7/64-Inch, 5/32-Inch, 1/4-Inch, 19/64-Inch

  • STUBBY MECHANICS LENGTH: 135 degree split point reduces drill walking, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for removing damaged bolts and screws, or drilling a pilot hole for a screw extractor.
  • INCLUDE: 2pcs 5/64 inch, 2pcs 7/64 inch, 1pc 5/32 inch, 1pc 1/4 inch and 1pc 19/64 inch cobalt left hand drill bits with case.
Check Stock

QWORK Twin Blade Adjustable Hole Saw - Cutter with ABS Dust Shield for Recessed Lights Speakers Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8\ to 8\ ( 40-200mm )

  • Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic.
  • Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application..
  • Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up..
  • Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32.
Check Stock

MaxTool 3/8\ HEX Arbor/Mandrel 1/2-20UNF Thread 1/4\x3-1/16\ M2 Pilot Drills Fits up to 1-3/16\ Saws; BA24H1802-M34

  • Standard Arbor with 1/2-20UNF thread fits up to 1-3/16" Hole Saws.
  • Tool-free release collar to prevent hole saws from locking to the mandrel.
  • Includes 1/4"x3-1/16" Overall Length HSS M2 Fully Ground Pilot Drill Bits.
  • Set screw in the body for replacing Pilot Drills.
  • Quality tool steel with precision heat treatment.
Check Stock

MaxTool 7/16\ HEX Arbor/Mandrel 5/8-18UNF Thread 1/4\x4\ M2 Pilot Drills Fits 1-3/16\ up SAWS; BA28H1809-M45PN9

  • Standard Arbor with 5/8-18UNF thread fits to hole saws larger than 1-3/16-Inch in diameter.
  • Tool-free release collar to prevent hole saws from locking to the mandrel.
  • Includes 1/4"x4" Overall Length HSS M2 Fully Ground Pilot Drill Bits.
  • Set screw in the body for replacing Pilot Drills.
  • Quality tool steel with precision heat treatment.
Check Stock

MaxTool 7/16' HEX Quick Change Arbor/Mandrel 5/8-18UNF Thread 1/4'x3-1/16' Pilot Drill Fits 1-3/16' up Saws; BA28H1809PP

  • Standard Arbor with 5/8-18UNF thread fits to hole saws larger than 1-3/16-Inch in diameter.
  • Tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • 2-Pin drive positive lock Includes 1/4"x3-1/16" Overall Length HSS M2 Fully Ground Pilot Drill Bits.
  • Set screw in the body for replacing Pilot Drills.
  • Quality tool steel with precision heat treatment.
Check Stock

Seeutek 12pcs TCT Carbide Hole Saw Kit for Hard Metal,5/8\-2-1/8\ Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill Bit for Stainless Steel, Iron, Aluminum, Alloy, Plastic, Wood

  • ✅【Unique Design】Metal hole saw kit drill tooth are designed with 3-blade.Outer ,middle and inner blade.Extremely sharp, impact resistant, wear resistant. Smooth chip removal, no burrs.Internal spring design reduce noise and expel debris..
  • ✅【Hole Saw Kit Includes】10pcs hole cutters with 2pcs pilot drill bits:5/8"(16mm),3/4"(19mm), 7/8"(22mm),1"(25.5mm),1-1/8"(29mm),1-1/4"(32mm),1-3/8"(35mm),1-3/4"(45mm),2"(51mm),2-1/8"(54mm),Cutting Length:≤ 28mm(1Inch), Shank Dia.: 10mm(2/5 Inch) Gift: 2pcs pilot drill bits, 2pcs hex key,1x exquisite aluminum case.Various sizes are available to meet your different needs..
  • ✅【Multiple Uses】Hole Saw Sets provide precise cuts into 0-28mm thickness metal material.Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.Widely used in hard metal,Stainless Steel,Iron,Aluminum Alloy,FRP,Copper Pipe,Wood,PVC Pipe,Plastic.Not recommended for tile, glass, concrete, stone..
  • ✅【Our Support】Seeutek Hole Saw Sets come with upgraded portable packing exquisite aluminum box with handle.A good gift choice for your family or lovers.If you have any question about product, please feel free to contact us by email or Q&A, the reply will b....
Check Stock

JINGLING 50mm 2" inch Diamond Hole Saws Tile Drill Bit Masonry Tools for Stone Glass

  • Product Name: Diamond tip masonry bit, Stone cutting bits, Granite hole bit, Drill bits for rocks.
  • Excellent for making clean and accurate hole on stone, granite, marble, tile, glass.
  • Please add water for coolant and drill slowly.
  • Holes require no ruther work as cutting is clean.
  • NOT have center pilot drill, 3/8 inch hex shank will fit handheld or upright drillers.
Check Stock

JINGLING 13mm 1/2" Diamond Hole Saw Drill Bit Coated Masonry Tools for Rocks Stone Glass

  • Product Name: Diamond tip masonry bit, Stone cutting bits, Granite hole bit, Drill bits for rocks.
  • Excellent for making clean and accurate hole on stone, granite, marble, tile, glass.
  • Please add water for coolant and drill slowly.
  • Holes require no ruther work as cutting is clean.
  • NOT have center pilot drill, 5/16 inch hex shank will fit handheld or upright drillers.
Check Stock