Top Screw Weld

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

(Pack of 4) Angle Grinder Holder Tool Wall mount Bracket for 5inch Grinder

  • Store your Grinder vertically. One convenient, compact rest for easy access..
  • Can be wall mount via screw or weld onto metal surface.
  • Holds most 5 inches grinders. Made of 2mm steel plate in yellow chromate zinc plating finish.
  • Multi-purpose tool. Must have for home garage, machine shop or warehouse..
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

AF KIT-JIC - JIC 37 Degree Flare Cap and Plug Kit - 50 Piece

  • 3/4-inch cap dauber first Weld-On Primer and Solvent pint and 1/2-pint cans.
  • Dauber is conveniently attached to the bottom of the screw cap for application of primer and cement.
  • Cap creates a tight seal, preventing primers and solvent cements from drying out.
  • Practical design ensures you always have an applicator on hand.
Check Stock

(Pack of 4) Black Angle Grinder Holder Tool Wall mount Bracket for 5inch Grinder

  • Store your Grinder vertically. One convenient, compact rest for easy access..
  • Can be wall mount via screw or weld onto metal surface.
  • Multi-purpose tool. Must have for home garage, machine shop or warehouse..
Check Stock

MTB 40 Inch Auger Earth Anchor 4 Inch W Helix, 14mm Rod, Painted red, Guying Tents Fencing Canopies, Pack of 6,Ground Anchor,Eye Anchor

  • 40 inch length with 4 inch width helix auger earth anchor..
  • Powder coated red color. Weld eye ring for installation and tie off. Firmly welded helix..
  • Easy installation by hand or machine,screw into the ground to guy down tents, canopies, storage buildings, fencing, playground equipment, trees, as well as more other guying uses..
  • Ideal for anchoring storage sheds, fences, car ports, gazebos, boats, tents, airplanes, awnings, pool covers, propane tanks, tarps, trellis,arbors and playground equipment,tent stake,ground screw U-Model,fence post dog training tug,dog rope,dome stake..
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

AZSSMUK 1' Shaft Collar Lock Collar Clamp Stainless Steel Set Screw,2-Piece

  • Made of High quality 304 Stainless Steel, better weld ability and resistance to corrosion than the regular steel.
  • Bore Diameter: 1", Outside Diameter: 1-5/8", Height: 5/8"..
  • Suitable for gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby craft industry and many more..
  • Package Content: 2-Pieces 1" Stainless Steel Shaft Collars with 1Pcs Set Screw..
Check Stock