Top Screw in Brake Cap

Swpeet 14Pcs Bike Brakes Sets, Including 2 Pairs V-Type Brakes, Universal Bike Front and Rear Brake Cable, Cable End Caps, Rubber Boot, V Brake Noodle Bend Pipe for Most Mountain Bike

  • 【 What You Get】 ------ In this kit, You will get 14Pcs Complete Bike Brake Set, Including 1Pcs V Brake Noodle 90 Degree Bend Pipe.
  • 1Pcs V Brake Noodle 110 Degree Bend Pipe.
  • 1Pcs Rear Brake Cable. Intotal 14Pcs can meet all your bicycle installation needs..
  • 【 2 Pairs Mountain V Bike Brakes】 -------- Which can fit most of bicycles mountain bikes, Durable aluminium alloy and plastic and rubber for the bike brake set, they are very strong and with resistance to cold, heat and oxidation. and it is not easy to out of the shape. A fairly decent replacement brake system. Parts are well made and work well. The adjustment screw for the brake springback makes it easy to adjust..
  • 【 4Pcs Cable End Caps】 -------- The end caps included can help prevent the cable ends from splitting and avoid you being poked by the split ends.
  • Put the cap through the cable and clamp the cap to fix it firmly to the cable.
  • 【 High Quality】 -------- The brake housing set is made of alloy and plastic, strong and durable enough for long time use, with resistance to cold, heat and oxidation, not easy to deform, ensuring the brake sensitive, suita....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • ...anger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
  • Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • Specifications and Accessories: 34 oz used flu....
Check Stock

Joyzan Bicycle Cable Adjusters, Clutch Brake Cable Adjuster Screw Metric Clutch Brake Cable Adjuster Bolt Mini Brake Cable Gear Shift Connector Line Regulator for Mountain Road Bike (red)

  • ...ke cable adjuster is comfortable operation, bike shift cable is very useful and practical.
  • Bicycle brake cable adjuster cover, the anodized cap surface, colorful colors for you to choose: red, black, titanium.
  • You can choose the one according to your needs.
  • [High Strength and Durable]: Each motorcycle cable adjuster screw is made of quality aluminum alloy, corrosion and rust resistant, lightweight and high-strength, no splitting, flaking off and breaking, durable and reliable to provide you with a long time application.
  • [Fits Most Bikes and Motorcycles]: Bicycle cable guide has a wide range of compatibility and can be applied to most motorcycle ATVs, giving you a good using experience, bike brake are a nice and practical replacement for stock cable adjusters, which can be applied to most motorcycles.
Check Stock

Front Brake Wheel Cylinders Shoes Kit for Honda TRX300 TRX300FW Fourtrax 300 4x4 1988-2000 (Left&Right),OEM# 45330-HC5-006 45310-HC5-006 06450-HC5-900

  • 【Fitment】Fit for Honda ATV Fourtrax 300 4x4 TRX300FW 1988-2000 (Excpet 2x4 Editon).
  • 【Material & Feature】This high grade brake wheel cylinder is made with EPDM rubber cups, cast iron and aluminum.100% non-asbestos friction formulations can prolong brake shoes wear and stabilize braking performance..
  • 【OEM#】45330-HC5-006 45310-HC5-006 0645-0HC5900. Exact as original, please check your bike OEM number before you make an order..
  • 【Package】1 × Left Brake Wheel Cylinder A, 1 ×Left Brake Wheel Cylinder B, 1 ×Right Brake Wheel Cylinder A, 1 ×Right Brake Wheel Cylinder B, 2 ×Banjo Screw, 4 × Washer, 4×Brake Shoe, 4×Brake Spring , 4×Shoe Clamp Spring , 4×Pin Tension, 4×Pin Cap, 4×Pin Seal, 2×Adjusting Hole Plug.
  • 【Service】JAVIK offer 24 hours customer service and 1 year warran_ty. Please feel free to message if you meet any problem..
Check Stock

Kuryakyn 5751 Satin Black Motorcycle Foot Controls

  • Direct replacement for specific Indian models.
  • Made with proprietary EPDM premium rubber compound provides reduced vibration for long-haul comfort.
  • Constructed from durable aluminum with a superb satin black finish and rubber inserts offers better grip with no-slip surface.
  • Includes (1) Satin black shift or brake peg, (1) satin black M8 X 1.25 X 90mm socket head cap screw, (1) internal tooth lock washer.
  • suggested tools for installation (not Includes): pliers and metric hex wrench set.
  • Compatible with Indian models using shift peg applications: '14-'19.
  • using rear brake applications: '18-'19 Chieftain, '19 Chieftain Dark Horse and '15-'19 Scouts.
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

Allstar Performance ALL50855 Bleeder Screw Cap, (Set of 10)

  • Snap-on cap helps protect the brake bleeder screw from dirt and corrosion.
  • New caps insure water will not cause rust and seize.
  • Conveniently packaged in a box of 2 to assist with all project sizes.
  • Also suitable for a broad variety of industrial and commercial uses.
Check Stock

CDHPOWER Bike Brake, Bike Disc Brake, Bicycle C Brake Caliper, Aluminum Alloy Front & Rear Side Pull Brake Set Bike Accessory for Mountain Bike, Folding Bike, Road Bicycle (Black)

  • Pack of 1 pairs bike brake including 1 x front brake caliper, 1 x rear brake caliper. PLEASE NOTE.
  • Please check if it fits your size before buying.
  • Height of break pad adjustable 20mm；front screw length: 50mm.
  • Made of aluminium Alloy material brake arm that equipped with wear-resistant rubber brake pads, anti-rust and sturdy, making it resistant to collision and not easily deformed to ensure long time use..
  • The grooves on the rubber pads can improve braking efficacy and provide smooth operation to make cycling safer..
  • The length between brake rubber measures 3.15"/8cm. With longer screw shaft is front brake caliper, with shorter screw shaft is rear brake caliper. Great replacement set for mountain bicycle, road bike, most bicycles to provide a smooth braking performance or bringing the bike to a stop.
Check Stock

F FIERCE CYCLE 10Pcs M6x1mm M7x1mm M8x1.25mm M10x1mm M10x1.25mm Banjo Bolt Bleeder Screw with Cap for Motorcycle Brake Master Cylinder

  • Size: M6x1mm(2pcs), M7x1mm(2pcs), M8x1.25mm(2pcs), M10x1mm(2pcs), M10x1.25mm(2pcs) Banjo Bolt Bleeder Screw.
  • The product will be delivered at random due to the difference of the color..
  • Prevent brake fluid leakage by regular replacement of bleeder nipples,.
  • Metric fittings adapter rear brake caliper vent screws bleeder nipples..
  • Package Included:10 x Bleeder Screw with Cap..
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock