Top Screw in Stand

WLPREOE Camera Desk Mount Stand with 360° Rotatable Ball Head for DSLR/Webcam/Ring Light/Video Light Adjustable 12.9-22inch Aluminum Tabletop C Clamp for Make Up Live Streaming Photo Video Shooting

  • UNIVERSAL DESK MOUNTABLE STAND: Desk clamp stand with standard 1/4 screw can be mounted for most cameras and lights , such as, ring light, Webcam, led....
  • ADJUSTABLE STAND:The clamp is adjustable for fitting different table through adjust the knob and screw. Height of stand can be expanded from 12.9....
  • DURABLE MATERIAL MADE: Made of aluminum alloy material without getting rusty, making it strong for heavy duty work and preventing deformation.
  • WIDE APPLICATION: This desk camera clamp stand can be perfectly used in livestreaming, video chatting, conferencing, make up, interviews, lighting and....
  • 360° ROTATABLE BALL HEAD: Attached 1/4“ Screw 360°metal ball head allows you fixed easily by locking knob for meeting different shooting angle.
Check Stock

Neewer 41\ Mini Tripod Stand for Webcam/Phone/LED Light, Aluminum Alloy Extendable Portable Desk Tripod Stand with Ball Head Adapter for Vlogging, Zoom Call, Live Stream (Silver)

  • ...djustable Handheld Selfie Stick & Floor Stand, 2-in-1]: Tube diameter 9/12/15/18/21mm, this 5-section telescopic tripod stand can be adjusted from 13.2in/33.5cm to 41.3in/105cm. It is great to be used as a selfie stick or a photography floor stand to meet different shooting requirement.
  • 003cp003e[Ball Head with 1/4" Screw]: The ball head can be adjusted 360 degrees and locked to a certain angle. It can be used with a lot of equipment that include 1/4-inch screw holes, such as mobile phone holders, sports cameras, mini lights, etc. Note: Max. Load Capacity is 2.2 pounds/1 kilogram. Please confirm the weight of the equipment your want to install before using.
  • 003cp003e[Detachable Tripod & Mini Desktop Stand]: 3-legged structure makes it possible to use on both flat ground and uneven ground. It can be disassembled into a mini desktop stand (with height 2.5in/6.2cm) to use. And the mini stand also has a 1/4-inch screw head..
  • 003cp003e[Lightweight and Convenient]: The tripod stand is made of sliver aluminum alloy material with exquisite and professional appearance. Weighing only 0.66lbs/300g, it is quite light. With a telescopic and detachable design, it is very suitable for carrying when going out..
  • 003cp003e[User-Friendly Design]: With a 3mm thick sponge on....
Check Stock

2 PCS Mic Stand Adapter - Boom Arm Screw Thread Adapter 5/8 Male to 3/8 Female Screw Adapter for Microphone Stand Shock Mount by YOUSHARES

  • Professional Screw Thread - The 5/8" male to 3/8" female screw thread adapter allows you to converts mic stands and shock mount from 3/8" threading to....
  • Mic Stand Accesorry - The mic stand adapter connect your microphone to a Boom Arm Mic Stand with 3/8" or 3/8" threaded..
  • Easy to install - Made of aluminum alloy, Knurled surface, anti-slip, complete and deep thread without burrs, convenient to install, stable and tight..
  • Suitable Places - Works with most microphone mounts. Used for connecting the interface of shock mount/suspension stand for professional recording....
  • Note - Package includes 2 pieces thread screw adapters ONLY! Mic Stand, Shock Mount Not Included..
Check Stock

Mic Stand Adapter Set,8 Pcs Mic Thread Adapters-5/8 Female to 3/8 Male and 3/8 Female to 5/8 Male, 5/8 Female to 1/4 Male and 1/4 Female to 5/8 Male-Screw Adapter for Microphone Stand Mic Boom Arm

  • 【Combo of 8 Packs】 You'll receive 8 Packs of mic stand adapters of 4 different types- 2Pcs 5/8 Female to 3/8 Male, 2Pcs 3/8 Female to 5/8 Male, 2Pcs 5/8 Female to 1/4 Male and 2Pcs 1/4 Female to 5/8 Male mic screw adapters, fit for different combination possibilities!.
  • 【High Quality】 Made of aluminum alloy,well-coated with frosted black paint,these microphone stand adapters are anti-corrosion,anti-rusted,durable and reliable,sturdy and firm,not easy to break or fade,offering you a long service life..
  • 【Stable Mounting】 Adopted the non-slip and knurled surface, deep threaded without burr design, each mic stand screw adapter offers you firm grips,mounting your devices more stable! No worry of falling or breaking.And the clear thread inside enables you to screw easily and smoothly..
  • 【Wide Applications】These mic threaded adapters of 4 types are widely used in most types of mic stands, mic clips, camera stands, recorder stands and other same thread accessories,enable you to gain more rig combination possibility and freedom..
  • 【Easy To Install】 A slot on the bottom of 5/8 male to 3/8 female and 5/8 male to 1/4 female screw adapter is designed for microphone stand, you can easily install and remove them. All mic stand adapters are well-packed ....
Check Stock

Universal Granite Umbrella Stand Tube Outdoor, Stone Umbrella Stainless Steel Tube Base for Outside, Heavy Duty Marble Flag Pole Stake Holder, Table Umbrella Tube Bracket,DIY Metal Tube Umbrella Mount

  • ...et. Sizes are 1-1/4″(32mm), 1-1/2″(38mm), 1-9/10″(48mm). Choose the appropriate tube sleeve according to the diameter of the umbrella pole, and then tighten the two on the stone umbrella tube holder Secure the knob so the umbrella pole doesn’t wobble even on a windy day..
  • WINDPROOF UMBRELLA STAND: There is a screw hole at the bottom of the table umbrella tube stand base. Insert the supplied screw through the bottom of the granite slate and then through the screw hole at the bottom of the Stainless Steel umbrella tube stand, and then tighten the steel screw to fix the metal tube umbrella mount on the granite slate. This way your umbrella won’t rotate and move in the wind, and can be moved to where you need your umbrella, depending on your needs..
  • WIDE RANGE OF APPLICATIONS: The heavy duty umbrella tube holder can be fixed on cement boards, granite boards, iron boards, wooden table, slate, marble slab, etc., and is compatible with umbrella poles, flagpoles, wind direction poles and other poles. Own it now, use heavy materials such as waste granite slabs, cement slabs, marble slabs, wheels, etc. to DIY a unique umbrella stand base that belongs to you, and save you money..
  • WHAT WILL YOU GET? umbrella Stand Tube x 1, 1-1/4″(32mm) PVC pipe sl....
Check Stock

Neewer Tabletop Light Stand Clip Stand with 1/4inch Screw for Ring Light and LED Light, Aluminum Alloy, 5kg/11 Lbs Load Capacity, Adjustable 21.6-47.2inches/55-120CM for Live Streaming, Video Shooting

  • 003cp003eADJUSTABLE STAND: The stand height can be adjusted from 21.6inches/55centimeters to 47.2inches/120centimeters through fixed knob.
  • It is a convenient support stand for lighting equipment.
  • Note: Only the tabletop stand is included, other accessories in the pictures Not Included.
  • 003cp003eSTANDARD 1/4INCH SCREW: Designed with standard 1/4" screw, it supports most photography lighting equipment such as, ring light, led video light, smartphone holder, DSLR cameras etc.
  • 003cp003eSTABLE AND DURABLE: Made of aluminum alloy material which ensures a long time use without getting rusty, making it strong for heavy duty work and preventing deformation.
  • 003cp003eADJUSTABLE TABLE MOUNT CLAMP: The clamp is adjustable for fitting different table through adjust the knob and screw. The clamp can support the table thickness from 0.8-3.1 inches/2.2-8 centimeters.
  • 003cp003eWIDE APPLICATION: This tabletop light stand with adjustable height is great for supporting ring light, camera, smartphone, video light etc, which can be perfectly used in make up, interviews, lighting, live streaming, video shooting.
Check Stock

Janaden Acrylic Risers Display Stand 3 Tier Clear Acrylic Display Shelf for Amiibo Funko POP Figures Steps Display Shelves Perfume Holder Cupcake Stands for Decoration and Organizer

  • ...mm thickness acrylic panel. The clear acrylic display stand has a nice polished finish and is thick enough that you are not worried about it warping or falling over. And crystal clear acrylic that does not distract from the items you are displaying..
  • 【Easy to Put Together】The four legs per each piece are easy to screw on, you can just insert the screws into the holes of acrylic display and press the screw with your thumb and twist the pillars into place, very easy to assemble, don't need the screw driver..
  • 【Great for Displaying Small Items】If you need a way to raise some of them so they could be seen. These tiered display risers fit the bill perfectly. The acrylic riser shelf is a great way to organize and display your smaller collectibles or items, it can be used as cupcake stand, perfume organizer stand, makeup organizer stand, spices rack and shot glasses display shelf..
  • 【Good Condition Package】All Acrylic Stands for Display are wrapped in a protective bubble film to prevent the Acrylic Funko POP Display Shelf from scratching and damaging in transit. With a cleaning cloth, you can clean the acrylic organizer shelf off if you smudge it. Let our step acrylic riser dust free all the time..
Check Stock

Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable

  • Includes: Boom arm stand. Allen key . 2" long M8 screw (for desk surface-mounting). 4" long M8 screw (for desk surface-mounting thicker desks). C-Clamp for desk clamping. Fixed mounting plate to mount it into your desk (comes pre-installed to the C-clamp, see our video for how to install). Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand. Mic clip.
  • Rockville ROGAN STAND Pro Boom Arm Mic Stand. Includes XLR cable built into the stand that is hidden inside the stand for a clean look. Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism..
  • Easily Mounts to the top of a desk (See our install video). Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3” inches thick) . This is made out of aluminum which is rust-free and lighter weight..
  • Arm length: 19" + 19". Position is completely adjustable. Firmly stays in place once you adjust it. There is a safety locking pin for the arm to lock in place (other similar stands do not have this)..
  • Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this). Standard 5/8” Mic Threads for Connecting Most Podcast and Vocal Microphones. Suitable for st....
Check Stock

M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit，Compatible ASUS Motherboard

  • M.2 Standoff and Screw for motherboard NGFF/NVMe Kit，Screw specification M2*3 (mm).
  • compatible Asus13020 M.2 SSD Mounting Kit Standoff + Screws for Motherboard ..
  • M.2 Screw + Screw Hex Nut Stand Off for motherboard NGFF.
  • Application: Perfect for universally laptop notebook repair, applied in electronics, computers, PC board, DIY hobby etc..
  • Package Content:Hex head jackscrews*4、Flat head Screws*4、Transparent screw washers*4、Screwdriver*1.
Check Stock

Vangoa Snare Drum Stand Lightweight Double Braced Adjustable Height Snare Stand with Carrying Bag Fit 10' to 15' Dia Drums

  • ✔️【STURDIER & HEAVY-DUTY】2.5 cm wide in tube diameter, thicker pipe makes it studier and durable.
  • Double-braced legs offer better performance in keeping a heavy drum in place. Adjusting Knob is updated, using ergonomic design, comfortable to hold, agile to operate.
  • ✔️【MEMORY CLAMPING SCREW】Clamping screw remembers your setting of the diameter you used last time, saves your time in setting and it can tighten the clamp to fully secure your drum. The rubber gasket provides frictional hold and the screw hold can back out from vibration then the whole snare would not slide down. It will not mark your snare drum as well.
  • ✔️【EXTRA CARRY BAG】If you are afraid of the drum being damaged by a snare stand using the storage bag of the drum, why not separate them? Extra carry bag can help you, it is a 420D oxford cloth bag, durable and waterproof.
  • ✔️【PERFECT FOR STUDENTS&PLAYERS】The lightweight snare drum stand is perfect for students and advanced players. It is foldable and double-braced, easy to carry for courses or take out performances.
Check Stock

Universal Baby Camera Mount Flexible Baby Monitor Holder Shelf Compatible with Infant Optics Baby Monitor,Baby Monitor Camera Holder Strong Camera Shelf Bracket Compatible with Most Baby Monitors

  • ...l not damage the crib or furniture.(It can be installed on furniture with a thickness of 0 to 4.5 cm.).
  • MULTIPLE INSTALLATION METHODS-You can directly use the camera clip to fix the camera (the diameter of the bottom of the camera is 6.5cm to 8.5cm) you can turn the spring screw according to the size of the camera to adjust the "tightness".Use the accessory base to match the (M5 threaded holes and shape screw 1/4 threaded holes).
  • The total length of the stand is 85cm, The camera bracket is made of strong, high-hardness reinforced aluminum alloy, which has better bending and longer service life.The top of the baby monitor stand is a device for holding the camera,It adopts a spring-stretched design.The screw device on the top is designed to pass through the handle.Need to rotate the screw after placing the camera and to fix the camera..
  • THE CAMERA STAND IS COMPATIBLE WITH MOST MONITORS ON THE MARKET-Made of aluminum alloy material,look clean, smart and sturdy. Perfectly fit for your baby monitor. Equipped with 3M sticker and 3 fixed screw and to avoid your device falling off.This baby camera mount is suitable for mo....
Check Stock

InnoGear Desktop Microphone Stand, Upgraded Adjustable Table Mic Stand with Mic Clip and 5/8\ Male to 3/8\ Female Screw for Blue Yeti Snowball Spark & Other Microphone

  • Upgraded with metal base and affixed with 4 non-slip cottons, moving the desktop microphone stand without causing any noise and leaving any scratches on the table..
  • Our base diameter is bigger and weight of stand has been increased as heavy as 840g(1.85lb) so it won’t be knocked over very easily.
  • the desktop microphone stand is adjustable from 10.6” to 15.4” height..
  • Other's snap-in style stand may loosen after a long time, while our screw-in style stand is much more secure and tight, making sure the height stays on without sliding down..
  • Package comes with an extra high quality metal 5/8" Male to 3/8" Female Screw for multi-purpose of use. It works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphone..
  • The desktop microphone stand is easy to carry. Suitable for holding the microphone at the conference room, church and other public places..
Check Stock