Top Screws For Composite Decking

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

...onsistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..

...onsistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..

DURABLE: The 65" x 35" mat is weather resistant and made from 100% durable PVC material..
PROTECTION: Protect your deck and patio from grease, spills and stains..
EASY CLEAN: To clean the mat, simply spray it down with a garden hose and it is ready for its next use..
PERFECT FOR YOUR GRILL: Works with smokers, gas grills, and griddles.
Note: Not recommended for use with composite decking. Discoloration to composite decking may occur if water pools beneath the mat..

Fastest, Easiest way to hide fasteners in composite, capstock or PVC deck boards.
Each 100 linear foot box includes 224 screws, 300 plugs and 2 setting tools.

18 Degree Tapered Head and Reversing Thread to Prevent Mushrooming.
Dual Threaded (fine/coarse) Assists With Cutting Through Fibrous Decking Material.
Type 17 Tip for Fast Starts, Helps Eliminate "Walking" and Easier Installation without Pre-Drilling.
Uses Include Cap Stock, PVC and Composite Decking, Composite Fascia and Composite Railing.

A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..

Helps create a straight line of screws across your whole deck.
JIG-A-DECK allows you to professionally space & fasten deck boards in a fraction of the time.
Allows perfect fastener spacing for both 4" & 6" wide deck boards.
Excellent for use with hardwood, composite PVC & pressure treated decking.

STRONG DECK PROTECTION: Reversible grill mat that protects decks by trapping grease and other liquids associated with gas grilling.
HEAVY DUTY ABSORBANCE: Holds up to 5 times its weight in liquid.
COMPATIBLE WITH ALL DECK SURFACES: Protects all surfaces including wood, brick, stone, slate, cement, and composite decking.
REVERSIBLE NON-WOVEN FIBER MATERIAL: 100% recyclable materials that will not bond or adhere to composite decking.
TO MINIMIZE WEATHERING: Do not allow the area beneath The Gas Grill Splatter Mat to remain wet for extended periods.

#8 x 2 in. , 700 per pack, bugle head and star drive decking nails for treated lumber decks (not for composite decking).
Tan color provides an ideal finish and corrosion resistance for decking projects.
CEE thread enlarges hole to reduce splitting.
W-Cut thread for low torque and faster drive.
Fast bite tip provides an immediate start.

#9 x 2-1/2 in., 400 per pack, bugle head and star drive decking nails for treated lumber decks (not for composite decking).
Tan color provides an ideal finish and corrosion resistance for decking projects.
CEE thread enlarges hole to reduce splitting.
W-Cut thread for low torque and faster drive.
Fast bite tip provides an immediate start.

Pack of 10 balusters. Including 20 connectors with screws..
Glossy black powder coating steel balusters last years of use. Add a vivid touch to your deck/porch railing..
About 1 baluster every 5 inches. Ideal for use in wood deck railing with screw-on connectors,handrail picket,post sleeve,post cap,post cover,stair fencing,cable railing,stair treads,outdoor lighting,composite decking,.