Top Scsi Cables

ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)

  • 【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
  • 【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
  • 【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • 【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
  • 【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.
Check Stock

Micro SATA Cables SCSI HPDB 68 Female to IDC 50 Female F/F Adapter Converter 68 Pin to 50 Pin

  • SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
  • You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
  • The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.
Check Stock

Pc Accessories - Connectors Pro 3 Feet SCSI to Peripheral CN50 M/M Centronics 50 Pins Male to Male C50, Sun, SCSI C50 Cable CEN50 MM 3-FT Molded

  • SCSI or SUN workstation Cable with Centronics 50 Male to DB50 Male Connectors.
  • This SCSI RS232 cable connects SCSI to SCSI Devices or SCSI systems to SCSI Devices with a Centronics 50-pin or CN50 Male to Male..
Check Stock

EDIMS Mini SAS to SAS Cable Internal Breakout Cable SFF-8087 to SFF-8482 with 4X Molex Power Connectors for Raid Controller to Hard Drive 3.3FT

  • Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
  • Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
  • 30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.
Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • ...ller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.
Check Stock

Cable Matters Internal Mini SAS to SAS Cable 1.6 Feet, 0.5m (SFF-8087 to SFF-8482)

  • Mini SAS 36 (SFF-8087) Male Connect to the Host/Controller, 4x SAS 29 connect to the Target/Devices..
  • 4x SAS 29 female with extra 4 pole power. Multiple lanes support current speed of up to 6.0 Gbps through a single cable..
  • Point-to-point SCSI makes setting up SCSI easier than ever..
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access..
Check Stock

Monoprice 100862 HPDB 68F/HPDB 50M SCSI 3 Adapter (100862)

  • SCSI HD 68 Pin to IDC 50pin Adapter Card SCSI 68 Female-SCSI 50 Female.
Check Stock

Dell Genuine Adaptec ASC-39320A GC401 FP874 Ultra320 SCSI/LVD Dual PCI-X 320MBps RAID Controller Card Compatible Part Numbers: RT372, F9685, FP874, GC401 Compatible Model Numbers: ASC-39320A

Check Stock

Amphenol CS-VHDCIMX200-006 VHDCI SCSI-5 Cable, VHDCI Male to Male, 6 m, 20', Black

  • SCSI-5 (VHDCI) 0.8mm 68-pin stackable SCSI cable by Amphenol AIPC.
  • 100% double shielded twisted pair design for superior EMI/RFI rejection.
  • VHDCI 0.8mm 68-pin male to male die-cast SCSI connectors pre-installed.
  • Lead-Free PVC cable jacket with zinc die-cast backshells for durability.
Check Stock

Amphenol CS-VHDCIMX200-002 VHDCI SCSI SCSI-5 Cable, VHDCI Male to Male, 2 m, 6.6', Black

  • SCSI-5 (VHDCI) 0.8mm 68-pin stackable SCSI cable by Amphenol AIPC.
  • 100% double shielded twisted pair design for superior EMI/RFI rejection.
  • VHDCI 0.8mm 68-pin male to male die-cast SCSI connectors pre-installed.
  • Lead-Free PVC cable jacket with zinc die-cast backshells for durability.
Check Stock

HPE ML350 Gen10 RDX/LTO Media Drive Support Cable Kit with Fan Blank for Long LTO

Check Stock

Internal 68 Pin SCSI Ribbon Cable - 5 Device SCSI Cable

  • SCSI 5 devices 68-Pin Ribbon Cable for Ultrawide SCSI Products.
  • 7x DB68M Connectors: 5 for Devices, 1 for Controller, 1 for Terminator.
Check Stock