Top Scsi Raid Card

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.(Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.(Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

Mini SAS Cable with SATA Power, CableCreation Internal Mini SAS 36 Pin to 4 x 29 Pin Cord with SATA Power, SFF-8087 to SFF-8482 Cable, 3.3 FT

  • Please note that this Mini SAS (SFF-8643) to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port.
  • Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • SFF-8643: the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

Hewlett Packard HP 462832-B21 Smart Array P411 SAS RAID Controller - 512MB - PCI Express x8 - 300MBps - 2 x 26-pin SFF-8088 mini - Serial Attached SCSI External

  • HP SAS RAID Controller - PCI Express x8 - Up to 300MBps - 2 x SAS 300 - Serial Attached SCSI Internal.
Check Stock

Oyen Digital Novus 16TB External USB-C 7200RPM Hard Drive

  • Mercury elite pro dock solution raid thunderbolt 3 dock and dual-drive thunderbolt 3 / sata 6.0gb / s / usb 3.1 / gbe your multitool for digital workflows with two bays, seven connectivity ports and a sd card reader 4.5.
  • Configure for your unique needs you can customize mercury elite pro dock to quickly adapt to project changes and help you meet deadlines.
  • install your choice of 2.5 or 3.5 inch hdd or ssd and also combines the speed of a ssd and the economical storage capacity of a hdd.
  • with built-in hardware raid, you have four drive configuration options.
  • Non-raid to keep drives as independent raid 1 (mirror) volumes for reliability of raid 0 backup (strip) for optimal performance and maximum speed or use try to combine drive capacities into a single volume for extra-large storage capacity.
  • (2) thunderbolt 3 ports - speed and storage: hardware raid controller (raid 0.1, span or jbod / independent) - easy camera loads: sd 4.0 card reader (uhs-ii) front - a hub of options: (2) usb 3.1 Gen 1 ports (type a) - full steam ahead: ethethethethetho port ernet from 1 gb - custom configurations: (2) 2.5-inch or 3.5-inch sata drive b....
Check Stock

OWC Thunderbay Flex 8 Thunderbolt 3 Storage Docking Station w/PCIe Capabilities

  • Eight Universal 3.5/2.5-inch Drive Bays Use SATA/SAS1 and U.2/M.22 NVMe drives for up to 144TB of capacity and real-world speeds up to 2750MB/s. The top four bays can utilize U.2 SSDs.
  • Convenient front mounted USB-C and (2) USB-A 10Gb/s ports for peripherals and mobile devices. Frontside SD 4.0 and CFexpress card readers with up to 985MB/s speed.
  • Future ready: top four bays can use U.2 SSDs…the emerging M&E industry storage standard.
  • PCIe x16 connector/x4 lane slot for audio/video capture, networking, SSD storage, hardware RAID card, or I/O card.
  • Create, manage, and monitor advanced RAID sets with SoftRAID, the world’s most advanced RAID management solution with easy setup, e-notifications, and drive integrity monitoring. / RAID 4/5/1+0 (10) is available for Mac only at this time.
Check Stock

Dell 3J8FW H200 Raid Controller - R Series Servers

  • Dell Perc H730p Raid Controller Card - 2 Gb - 12gb/s Sas, Serial Ata/300 - Pci Express 3.0 X8 - Plug-in Card - Raid Supported - 0, 1, 5, 6, 10, 50, 60 Raid Level - 8 Total Sas Port(s) - 8 Sas Port(s) Internal - Linux, Pc - 2 Gb Flash Backed Cache.
Check Stock

Adaptec RAID 71605 Storage Controller 2274400-R

  • ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
  • ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
  • ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
  • ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

Intel Raid Controller Rs3sc008 . 12Gb/S Sas . Pci Express 3.0 X8 . Plug. In Card . Raid Supported . 0, 1, 5, 10, 50, 60, 6 Raid Level . 8 Sas Port(S) "Product Type: I/O & Storage Controllers/Scsi/Raid Controllers"

Check Stock

Micro SATA Cables SCSI HPDB 68 Female to IDC 50 Female F/F Adapter Converter 68 Pin to 50 Pin

  • SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
  • You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
  • The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.
Check Stock

Pc Accessories - Connectors Pro 3 Feet SCSI to Peripheral CN50 M/M Centronics 50 Pins Male to Male C50, Sun, SCSI C50 Cable CEN50 MM 3-FT Molded

  • SCSI or SUN workstation Cable with Centronics 50 Male to DB50 Male Connectors.
  • This SCSI RS232 cable connects SCSI to SCSI Devices or SCSI systems to SCSI Devices with a Centronics 50-pin or CN50 Male to Male..
Check Stock

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

  • Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
  • 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
  • 2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
  • PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
  • Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
  • Perfect for data recovery & backup / Improves the storage & performance of a PC.
Check Stock