Top Sealant For Mopar Header Bolts

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Tight-Fit Small Block Fits Chevy Block Hugger Headers

  • These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
  • 1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
  • These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
  • Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
  • Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Pitch Pad Kit - Zinc - Grade 5 Steel Lag Bolts (10) and Mastic Pads (5) for Roof Antennas, TV Mounts, Tripods, and Satellite Dish Installation

  • Features: Pitch Pad Kit Includes 10 lag bolts (6 that are 3 inches, and 4 that are 2 inches) and 5 moisture sealant pads (1 1/2" wide by 5") - also called foot sealers.
  • Perfect For: Used to seal out moisture and protect roof interior surfaces and spaces from water damage or leaks caused by drilling holes.
  • Easy to Install: Sealant pads possess high performance tacky surface - Installs under tripod feet, Satellite mount feet, antenna base or other mounts that penetrate roof or mooting surface.
  • Premium Construction: Passed test of over 2,000 hours in UV chamber with no major impact.
  • Perfect For: Used to wrap Low-Voltage Connections (e.g. Coaxial Connectors) to Waterproof/Watertight Splices and Connectors.
Check Stock

daodi 2Pcs for Car Door Lights Logo for Chevy Corvette Stingray C7 C8 Car Door Led Projector Lights Shadow Ghost Light,Wireless Car Door Courtesy Lights Logo for All Car Models forStingray

  • √ EASY & QUICK INSTALLATION,These Mopar door light projector can be easily installed in minutes with 3M tapes included, NO DRILLING, NO WIRING....
  • √ UNIVERSAL FITS, The Mopar door lights logo Can be installed on any car door panels that is straight and flat near the bottom, please check the....
  • √ PRACTICAL & COOL, A Super Bright and Cool White Mopar logo will be projected to the ground when you open the door, super cool. While showing you....
  • √ 2 LIGHTS FOR BOTH RIGHT & LEFT DOOR, The Mopar lights for doors can be installed on both right and left doors. Most customers purchase 2 sets for....
  • √ BE COOL, Our Mopar Door Light Projector set are especially designed for auto modification fanciers, it will not destroy the original car....
Check Stock

SBC Small Block Chevy V8 Cylinder Head Bolt Set

  • OEM-quality Grade 8 cylinder head bolt set (does both heads).
  • Replacing head bolts is cheap insurance to prevent downtime in the shop.
  • For use with cast iron cylinder heads (without washers).
  • 120,000 PSI proof load, 130,000 PSI yield strength, 150,000 PSI tensile strength.
  • Threads are coated with sealant to save you time durng assembly.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Valvoline (VV346-6PK) ATF+4 Automatic Transmission Fluid - 1 Quart, (Case of 6)

  • Fully compatible with all transmissions that require Mopar ATF+, Mopar ATF+2 and Mopar ATF+3.
  • Improved thermal stability for longer fluid life.
  • Improved viscosity stability for consistent transmission operation.
  • Specific frictional properties for smooth clutch engagement.
  • Contains special additives to prevent rust corrosion and wear for longer life.
Check Stock

Replacement for Professional 213-4514 Engine Coolant Temperature Sensor 12-Month Warranty

  • Compatible with all GM LS series engines.
  • Includes: 2 orings, 2 bolts, 2 coolant ports, 1 PTFE TAPE,and 1 steel braided hose ..
  • Can be installed on the front or rear of the cylinder heads.
  • not compatible with FAST 102 intake manifolds.
Check Stock