Top Seals Pneumatic

MECCANIXITY Bonded Sealing Washers G1/2 28.5x19x3.4mm Carbon Steel Nitrile Rubber Gasket, Pack of 10

  • The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal.
  • Nitrile Butadiene Rubber (NBR): Hardness: 60A.
  • Working Temperature Range: -20°C to 100°C (-4°F to 212°F).
  • Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
  • The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines.
Check Stock

Parker 17L44BE Lubricator, Metal Bowl with Sight Gauge, Manual Drain, 90 scfm, 3/4\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Transparent sight dome for 360-degree visibility.
Check Stock

Parker 17L42BE Lubricator, Polycarbonate Bowl with Metal Bowl Guard, No Drain, 90 scfm, 3/4\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Transparent sight dome for 360-degree visibility.
Check Stock

Parker L606-08W/M8 Lubricator, Zinc Bowl with Sight Gauge, Manual Drain, 350 scfm, 1\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Metal bowl with sight gauge for checking fluid level.
  • High-flow port for a flow rate up to 350 scfm.
Check Stock

Lewis N. Clark Cable Luggage Lock | TSA Approved | Travel Or Bike Lock | Set Your Own Combination | 30-inch Retractable Steel Cable | Green

  • FOR USE WITH CO2 AND PNEUMATIC PUMP AIR GUNS.
  • KEEPS SEALS FROM DRYING OUT - See operating instructions in your air gun user manual.
  • AIRPOWER ADVENTURES - Start with CROSMAN.
Check Stock

DeWalt DXCM251 25 Gal. 200 Psi Oil LUBED Belt Drive Electric Air Compressor

  • 200 maximum PSI provides 76% longer air tool run time vs. 30 gallon 155 PSI belt drive air compressors.
  • 6.2 SCFM at 90 PSI provides the ability to operate a larger selection of air tools.
  • Precision Automotive style pistons for greatly improved balance and durability.
  • 78 dba operational noise level for a quieter work environment than direct drive oil free compressors.
  • High flow regulator and coupler provide maximum air flow to air tools.
  • 10 in. Heavy-duty Pneumatic wheels for maximum portability around the shop or job site.
  • High efficiency aluminum Flywheel provides maximum air flow and lower start-up amps.
  • Aluminum head and valve plate to maximize heat dissipation.
  • Superior O-RING seals to eliminate oil leaks.
Check Stock

DeWalt DXCM201 20 Gal. 200 Psi Oil LUBED Belt Drive Electric Air Compressor

  • 200 maximum PSI provides 53% longer air tool run time vs. 20 gallon 155 PSI belt drive air compressors.
  • 6.2 SCFM at 90 PSI provides the ability to operate a larger selection of air tools.
  • Precision Automotive style pistons for greatly improved balance and durability.
  • 78 dba operational noise level for a quieter work environment than direct drive oil free compressors.
  • High flow regulator and coupler provide maximum air flow to air tools.
  • 10 in. Heavy-duty Pneumatic wheels for maximum portability around the shop or job site.
  • High efficiency aluminum Flywheel provides maximum air flow and lower start-up amps.
  • Aluminum head and valve plate to maximize heat dissipation.
  • Superior O-RING seals to eliminate oil leaks.
Check Stock

VEVOR Bottle Jack 32 T Car Jack Hydraulic Floor Jack 70500LBS with Manual Hand Pump Pneumatic Air Jack Heavy Duty Auto Truck Travel Trailer Repair Lift

  • Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation..
  • Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor..
  • Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use..
  • Heavy-duty Steel Structure: Made of sturdy metal, this hydraulic bottle jack provides a reliable and strong lifting capacity. In addition, the lacquered surface is rust-proof, not easy to wear. The thick and wide base provides stable support, easily cope with heavy loads..
  • Diverse Application: This hydraulic bottle jack with ....
Check Stock

QLOUNI 826 Piece Universal O-Ring Kits Assortment SAE + Metric Rubber NBR O-Ring Gasket Set for Plumbing, Automotive and Faucet Repair + 4 Piece O-Ring and Seal Remover

  • ★[Function] This O-Ring Assortment Set holds 407pcs SAE standard rubber o-rings and 419pcs metric universal standard rings Provides sealing and prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic & pneumatic repairs and much more..
  • ★[Oil Seal Hook] We offer 4pcs extra hook and pick set, it will allow you to easily remove O-Rings and various seals and bushings. The long shaft allows you to access areas that conventionally sized hook and picks just can't reach. These long hooks and picks are perfect for removing hoses, moldings, clips, clamps, seals, O-rings, cotter pins, gaskets and more!.
  • ★[Premium Quality] High quality rubber construction gives these o-rings oil and UV resistance,make rings with extra thick wall design provides long-term use..
  • ★[O-Ring Assortment] Metric standard have 32 sizes from 3 mm I.D. to 50 mm I.D. SAE standards have 32 sizes from 1/8” I.D. x 1/4” O.D. to 2” I.D. x 2-1/4” O.D..
  • ★[Convenience in storage] Each type one comes in a heavy-duty plastic storage case that keeps each size separated and organized.
  • Red box for SAE rings and Blue box for metric rings for you clarify easy..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock