Top Seamless Condenser Tubing

TYC 3782 Condenser Assembly Compatible with 2009-2012 Ford Escape

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

TYC 3569 Condenser Assembly Compatible with 2006-2011 Honda Civic

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

TYC 3086 Condenser Assembly Compatible with 2003-2007 Honda Accord

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

TYC 3396 Condenser Assembly Compatible with 2007-2011 Toyota Camry

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

EnduriMed CPAP Hose Cover 6ft - Comfort Sleeve for Heated Tubing - 100% Skin Safe Quality Zippered Tubing Wrap Insulator - Soft Fabric Wrap No Condensation - Insulated CPAP Tube Covers

  • SNUGELL CPAP TUBING COVER 6 FT: Snugell's ultra-soft fleece CPAP Hose Cover is designed to ensure maximum insulation and protection for optimal....
  • UNIVERSAL & COMPATIBLE TUBING WRAP: This hose cover will work with all major sleep apnea tubing and hose CPAP brands such as Resmed, Fisher & Paykel....
  • EASY TO USE: Works with a standard, slimline or heated CPAP tubing. Very easy to put on and off with a seamless zipper design. Great addition for your....
  • IMPROVE LIFE CYCLE OF TUBING: Minimizes water and dust accumulation on your tubing walls, reduces condensation, and provides maximum insulation and....
  • PROTECTIVE CPAP HOSE COVER WRAP FABRIC: Snugell’s CPAP Hose Cover cooling layers improve comfort and safeguard your tubing every night. Snugell is....
Check Stock

TYC 4720 Condenser Assembly Compatible with 1996-2002 Chevrolet Gmc C/K

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

Sauermann SI-30 120 Volt Mini Condensate Removal Pump for up to 5.6 tons (67Kbtu - 20Kw) Air Conditioners

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • INCLUDES SAFETY SWITCH and 20-FT VINYL TUBING: safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, safety switch and 20-ft. tubing included.
Check Stock

Little Giant 554435, VCMA-20ULST 1/30 hp 80 GPH Pump, 6 ft. Cord, 115V-60Hz, Pack of 3 pcs

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • INCLUDES SAFETY SWITCH and 20-FT VINYL TUBING: safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, safety switch and 20-ft. tubing included.
Check Stock

10 pcs 8 AWG 8 Gauge Butt Splice Connector Pure Copper Tin Coated Marine Grade Uninsulated - by WindyNation

  • Includes AWG splice butt connectors (use selection tabs to choose gauge size and quantity desired) + black dual wall adhesive lined heat shrink tubing (2 inches of heat shrink tubing per connector).
  • Butt connectors are made of pure copper with excellent electrical conductivity. Tin plated for corrosion resistance. Perfect for marine environments and outdoor use..
  • Dual wall polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 2 inches of heat shrink tubing per connector..
  • Designed to fit solid or stranded wire. Easily connect spliced cables to connectors for a non-insulated seamless connection. Connectors can be crimped or soldered. .
Check Stock

Moroso 65340 Fuel Line, 1/2\ OD, Aluminum, 25' roll

  • Lightweight aluminum tubing replaces small diameter fuel lines used in most production automobiles Large diameter, . 035" thick wall seamless tubing flows more fuel and eliminates fuel starvation Legal in all classes tested to 35 PSI.
Check Stock

TYC - 3525 06-11 Hd Cvic Sdn Dx/Lx/Ex/Hybd W/ R/D Cond (Pfc)

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

Grade 2 Titanium Sheet, Unpolished (Mill) Finish, ASTM B-265, ASME SB-265, 0.093' Thickness, 36' Width, 48' Length, OnlineMetals

  • Grade 2 titanium has high corrosion resistance, a high strength-to-weight ratio, and the approximate strength of 6061-T6 aluminum..
  • 0.093″ Thickness, 36″ Width, 48″ Length.
  • Titanium Grade 2 is typically used in aerospace components, automotive components, cryogenic vessels, heat exchangers, condenser tubing, and pickling baskets..
Check Stock