Top Seamless Steel Pipes And

Glarks 85Pcs Pipe Strap Clamp Set M8 M10 M12 M14 M16 M20 M25 304 Stainless Steel Two Hole Strap Heavy Duty Rigid Pipe Strap U Bracket Tube Strap Assortment Kit For Pipe Tube Fixing

  • ...lamps set, it include 8mm(5/16") x 20pcs,10mm(3/8") x 20pcs,12mm(1/2") x 15pcs,14mm(9/16") x 10pcs,16mm(5/8") x 10pcs, 20mm(3/4") x 5pcs, 25mm(1") x 5pcs, total 85pcs are well packed in a plastic box, easy to storage and carry..
  • ♛【High Quality Material】: All the pipe strap clamps are made of 100% 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ♛【Special Slotted Design】: Special slotted design makes the two hole pipe strap is more sturdy and not easy to deform, make the clamps to lay a rigid fixation for pipes on various surfaces like wall, wood, and structures like a circle or cylindrical. Secure your pipes on concrete walls..
  • ♛【Easy to Install】: The pipe strap clamps only need to cooperate with screws can be installed, convenient and fast. resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..
  • ♛【Wide Application】: The pipe strap is a perfect choice for fixing rubber pipes, oil pipes, plastic steel pipes, gas pipes, stainless steel pipes, indoor and outdoor drain pipes and so on. Also, they can be installed and used repeatedly, and ....
Check Stock

KCRET Bed Rail for Toddlers,Upgraded Infants Safety Bed Guardrail with Breathable Fabric for Twin, Double, Full-Size Queen & King Mattress (70.8”×30”, Gray)

  • 【New Upgraded Bed Rail】The bed rail can prevents children from climbing out and falling off the bed.This safe bed rail has adjustable height, which can be adjusted in the range of 29"-37"(74cm-94cm) after installation. Before your ordering, please measure your bed accurately..
  • 【Breathable Mesh Panel】The panel mesh panel is breathable for baby and transparent for parents watching  baby's every move, and you can also interact with the baby joyfully inside and outside..
  • 【Safety Bed Rail】Thicker steel pipes to strengthen the load bearing.
  • seamless press design, tightly pressing the mattress, truly seamless between the guardrail and the mattress, preventing the baby from getting stuck in the head or hands and feet..
  • 【Install without Screws】Safety bed rail needn’t use screws throughout the installation of the guardrail. It is very convenient to connect and fix each pole with a snap..
  • 【Wide Application】You can install them at convertible crib, twin, double, full size bed frames freely. It provides a secure, comfortable way for toddler, and also has protection for elderly or patients..
Check Stock

OhLectric Pipe Support Strap - Steel Pipe Strap with 2 holes - Heavy-Duty 1 inch U Bracket - Zinc Coated Tension Tube Clip - Pipe Clamp for EMT Conduits - OL-72860 - 25 PCS

  • DELUXE QUALITY MATERIAL: Constructed using high-quality steel metal with 1-inch thickness, OhLectric’s pipe straps are sturdy, strong and reliable. Also, have a strong resistance to salt, rust, and corrosion. A must-have water and oil proof clamp for your plumbing needs!.
  • PRECISE SLOTTED DESIGN: The unique U style design makes our 2-hole pipe strap to lay a firm fixation for pipes on various surfaces like wall, wood, and structures like a circle or cylindrical. Secure your pipes on concrete walls or even on ceilings with these steel metal straps for pipe!.
  • REINFORCED RIB: Designed to provide the extra strength, our EMT conduit strap has a prominent middle part that holds the heavy load pipes tightly and prevents them from twisting. This strong rib structure makes the clamp suitable for all indoor and outdoor piping needs!.
  • RIGHT SIZE: Made to fit for all 1-inch pipes, this wide pipe strap is the perfect clamp to hold all types of pipes like PVCs, and EMT conduits, Wire Pipes, Hoses, Electric Lines, or Cables for a panel and frame application. The polished silver-tone color gives the attractive look, making it suitable for humid environments!.
  • EASY INSTALLATION: Thanks to the high-quality steel material, OhLectric’s metal pipe strap can last for years....
Check Stock

DCT Multi-Angle Adjustable 13ft Band Wood Corner Clamp – Woodworking Clamping Kit that Clamps Picture Frames & More

  • ...u will get 50 pcs metal u bracket. The M12 pipe strap clamp is suitable for pipes with a diameter of 12mm/0.47inch. The diameter of the mounting hole is 4mm/0.15inch, the width is 11.7mm/0.46inch, and the thickness is 0.5mm/0.02inch..
  • HIGH QUALITY CLAMP - Tube strap tension clip is made of high-quality 304 stainless steel material, high hardness, corrosion resistance, water resistance, oil resistance. The surface is treated with rust prevention, and it can be used in a humid environment without worrying about rust. The metal pipe clamp adopts superb production technology, the surface is smooth and burr-free..
  • MULTIPLE USE - The u-tube clamp is widely used in stainless steel pipes, rubber hoses, gas pipes, plastic steel pipes, drainage pipes, etc. The rigid pipe strap is suitable for fixing pipe line with oil, water and gas..
  • SLOTTED DESIGN - The slotted design is more sturdy and not easily deformed. The U-shaped slotted design is suitable for fixing pipes on various surfaces and supporting structures. The metal pipe strap can be fixed on the wall and ceiling with screws or expansion screws, and the installation is simple fast..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% sa....
Check Stock

Tee Equal Diameter 316 Good Sealing Compression Ferrule Connector Tee for Solar Energy for Chemical Industry for Complicated Pipeline(Ф8)

  • 【Advantage】 Relatively common national standard connector double ferrule straight‑through connector, acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • 【Application】 Suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • 【Structure】 Compression ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • 【Good Sealing Perfomance】 When the ferrule and the nut are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • 【Reusable】 Ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble. Break the traditional installation method..
Check Stock

Lisle 34750 Low Profile Fuel Line Disconnect

  • Package: 3pcs fuel pipe Pliers kit includes fuel filter Pliers, 80-degree disconnect Pliers,Fuel Filter Calipers Tool, and tool bag for easy storage and carrying..
  • The fuel filter caliper is made of carbon steel, with an elastic spring design, which can adjust the opening, saving time and labor. It is compatible with most automobiles, and is suitable for automobile maintenance or fuel filter replacement..
  • The 80-degree disconnect pliers are made of carbon steel, and the curved jaws are suitable for operation in narrow spaces, which can avoid hand injuries..
  • The hose clamp is suitable for installing automobile water pipes, such as fuel pipes, gasoline pipes and oil pipes..
  • Tips: Our products are exquisite in workmanship. If there are any problems in use, please contact us in time and we will deal with them in time..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф10)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф8)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф6)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф3)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tee Equal Diameter 316 High Pressure Resistance Stainless Steel Die Forging SS‑600‑3 for Ship Manufacturing for Petroleum Exploration(Ф12)

  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

  • Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
  • Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
  • High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
  • Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
  • Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock