Top Second Hand Machines

Seiko Wall Clock Quiet Sweep Second Hand Dark Brown Solid Oak Case

  • If your clock has the second hand,slide the switch to "START". The hands starts moving.Then slide the switch to "STOP" when the second hand is at 12 o' clock position.The second hand stops on the spot..
  • Turn the hand setting knob by catching its protrusions with fingers, and set the hour and minutes hand with the desired time. The hand setting knob turns both clockwise and counterclockwise.When turning the hand counter clockwise,turn back the minute hand by more than 45 Minutes from the desired time and then advance it to the correct time..
Check Stock

2 Pair Hands Quartz Clock Movement DIY Wall Clock Movement Mechanism Clock Repair Parts Replacement (Shaft Length 9/10 Inch/ 23 mm, Color Set 1)

  • Package and install: come with specially designed with blister cardboard box and instructions, convenient to carry.
  • When you install this clock movement kit, please keep the hour hand and minute hand parallel.
  • Clock mechanism size: total shaft length is 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches).
  • Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
  • Clock hands kit: package includes 2 pieces of minute hands and 2 pieces of hour hands, 1 second hand and 1 second caps, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • Hole center to the tip hand size: the hour hands are approx. 80 mm/ 3.1 inch and 59 mm/ 2.3 inches respectively, minute hands are approx. 110 mm/ 4.3 inches and 86 mm/ 3.4 inches, the second hand is approx. 100 mm/ 3.9 inches, second caps is approx. 7 mm/ 0.28 inches.
  • Range of use: suitable for repairing, replacing or making a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
Check Stock

Seiko-SKP Quartz Clock Movement Kit with 5' Black Spade Hands for Dials up to 1/4'

  • Clock Movement Quartz with Hands, Second Hand, and Wall Hanger.
  • Threaded shaft length of 5/16", total shaft length of 5/8" Without Second Hand.
  • One set of hands & second hand included (Minute hand measures 5" from mounting hole to tip).
Check Stock

LNKA 4 Pack of 3000 Yard Spools Black Sewing Thread All Purpose 100% Spun Polyester Overlock Cone (Upholstery, Canvas, Drapery, Beading, Quilting)

  • Sewing Spool Threads Polyester Threads 4 Cones (3000 yards each) Spool of Threads for Sewing Machine and Hand.
  • 100% Polyester Spu Sewing Spool Threads Polyester Threads Spool of Thread.
  • Each Cone is 3000 yards. You will receive total of 12000 yards black Sewing Threads.
  • Polyester Threads for home or commercial machines with single needle or hand sewing.
  • Compatible with most sergers, overlocks, and sewing machines.
  • Great Quality High Tensile Strength, Low Lint Thread. Will not Break at High Speed Machines..
Check Stock

HP G4 G7 Series AMD Motherboard HDMI 638856-001 DA0R22MB6D0

  • PRODUCT DETAILS: 638856-001 System Board HDMI G4 Series Replacement Parts.
  • ACS OF MIAMI is committed to bring you quality products with a great service at the best pricing the industry. Shop with confidence..
  • PRODUCT FOCUS: Unlike many of our competitors we only specialize in laptop parts and cost-effectiveness. This focus has allowed us to build a knowledge base that is second to none. We can therefore generally provide technical advice and solutions where other companies may not be able too..
  • QUALITY PARTS: Our laptop parts are sourced from the worlds leading manufacturers, which ensures it is of the highest quality and we also salvage parts from used devices. This helps us making the best use of e-waste and thus saving our planet. All our laptop parts are also backed by a limited warranty..
  • LARGE PRODUCT RANGE: we have over 500,000 different accessories for PC's, Notebooks, Workstations, Servers, Printers, Digital Cameras, Hand-Held Computers, Fax Machines, MP3 players and many more and the list is ever growing. A huge database of information allows us to provide upgrades for almost any computer..
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

AMD V120 2.2GHZ VMV120SGR12GM CPU Processor for Acer Aspire 5251-1513 notebook

  • PRODUCT DETAILS: ACS COMPATIBLE with Athlon II M300 2 GHz Dual-Core (AMM300DB022GQ) LAPTOP MOBILE CPU Processor Replacement.
  • ACS COMPATIBLE is commited to bring you quality products with a great service at the best pricein the industry. Shop with confidence..
  • PRODUCT FOCUS: Unlike many of our competitors we only specialise in laptop parts and cost-effectiveness. This focus has allowed us to build a knowledge base that is second to none. We can therefore generally provide technical advice and solutions where other companies may not be able too..
  • QUALITY PARTS: Our laptop parts are sourced from the worlds leading manufacturers, which ensures it is of the highest quality and we also salvage parts from used devices. This helps us making the best use of e-waste and thus saving our planet. All our laptop parts are also backed by a limited warranty..
  • LARGE PRODUCT RANGE: we have over 500,000 different acessories for PC's, Notebooks, Workstations, Servers, Printers, Digital Cameras, Hand-Held Computers, Fax Machines, MP3 players and many more and the list is ever growing. A huge database of information allows us to provide upgrades for almost any computer..
Check Stock

uxcell Machine Tap 1/4-20 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 2pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock