Top Selective Wave Soldering Machine

Happybuy Reflow Soldering Machine T962 Reflow Oven 800W 180 x 235 mm Infrared Heater Soldering Machine Automatic (T962)

  • This reflow oven can solder single and double PCB panels with all kinds of encapsulation form..
  • The reflow soldering machine is a microcomputer automatic control, the whole welding process from pre heating, soaking, reflux to cooling is automatically completed..
  • Memory eight kinds of temperature parameter waves of the reflow soldering machine can be provided as choice, and establish to move heating and cool off function compulsory..
Check Stock

HiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110C Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof

  • 100% complete machine patch, wave soldering, stable performance, good consistency..
  • Embedded CPU chip (MCU), more intelligent, lower power consumption..
  • Automatic power set memory (MCU built-in EEPROM memory unit)..
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability..
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C.
Check Stock

MMOBIEL YiHua 853D Soldering Iron Station Hot Air Gun 750 W 3 in 1 SMD Rework Solder soldering Station

  • Professional Soldering Station: Upgraded Model 3 in 1 Soldering Iron Station integrated with an lead-free solder rework station, hot air gun 550W and power supply, using independent dual-core micro-controller, which means they can work independently. It is perfect for soldering and de-soldering (Removal) SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. LCD Display shows function Status and temperatures. 1 Analog meter Easy to deal with large joints, small spots and solder joint de-soldering..
  • Microprocessor Stable Temperature: Hot air SMD soldering station uses the latest microcomputer processor PID technology! Comes with high-speed 100ms real-time tracking, with real-time calibration! The temperature fluctuation range ≤±1°C. Working Temperature Adjustable from 100 - 250 to 500C. Iron soldering station adapt to correct a temperature deviation caused by the environmental impact or replacement of heating elements, fans, soldering irons etc. The temperature range is corrected: ±50C..
  • Auto Sleep Function: The soldering iron will automatically detect its working state. When it is in the static state and reach the sleep time, the temperature will automatically drop to 200 °C. It can effectively prevent the iron tip from oxidizing and prolong the service life....
Check Stock

Mellif Cordless Soldering Iron Station for Dewalt 20V Max Battery, Electric Digital Soldering Station for DIY, Appliance Repair, Watch Repair and Wire Welding(No Battery)

  • 【Compatibility】Mellif cordless soldering station works with DEWALT 20V/60V Flex XR Slide Style battery packs(Battery Not Included). This portable soldering station helps get your soldering job done more convenient and fast..
  • 【Fast Heating & Adjustable Temperature】This electric HD digital soldering station heats up fast. Temperature read-outs are displayed via a digital display, effortlessly turn the adjust knob to set the temperature precisely..
  • 【Compact & Lead-Free Solder】Mellif compact soldering station helps save precious work space. Lead-free soldering tip and soft handle design, provides extended comfort during long term soldering projects..
  • 【Safe to Use】Made of high quality material, built-in low-voltage protection. With automatic cooling mode, when not in use, the handle is placed on the handle frame, the machine will cool automatically, and the temperature will rise rapidly when picked up..
  • 【Warranty & Service】Replacement available if any quality problem in 6months. Contact us first if there is any question about the product.
Check Stock

CREWORKS 2 in 1 SMD Soldering Iron & Hot Air Rework Station with LED Display, 898D Soldering Kit with Heat Gun, Digital Electronic Repair Tool with 11pcs Soldering Tips

  • Two-in-one ----- Attention: The voltage of this product is 110V. Rework station and soldering station combine in one, and you can separately control SMD rework and soldering. This machine will save you space, money and keep your work desk well-organized..
  • Precise Temperature Control ----- You can easily adjust temperature with the up and down buttons while the LED screen shows the current temperature for your convenience, 8 complementary tips to accommodate different needs and extends the service life of the soldering pencil. Note: when the soldering pencil is placed on the stand over 10 minutes, the temperature will decrease automatically for safety concerns..
  • Super Quick to Respond ----- With the PID technology for even temperature control, the hot air gun heats up to 450℃ in 5 seconds and the soldering iron heats up to 200℃ in 7 seconds and keeps its temperature, the hot air gun blows at 120L/min for your work efficiency, the built-in fuse protection guarantees 100% safety during operation..
  • Wide Application ----- This rework soldering station is designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and other temperature sensitive components, an essential tool for cell phone repair, laptop repair, or circuit boards soldering. Truly a....
Check Stock

Nikon 18-140mm f/3.5-5.6G ED VR AF-S DX NIKKOR Zoom Lens – (White Box)

  • VR (Vibration Reduction) image stabilization helps to minimize the appearance of camera shake by 4 stops to benefit shooting handheld in difficult lighting conditions. Rounded seven-blade diaphragm promotes a pleasing out of focus quality that benefits the use of shallow depth of field and selective focus techniques..
  • This lens is compatible with: Nikon D3300, Nikon D3400, Nikon D3500, Nikon D500, Nikon D5200, Nikon D5300, Nikon D5500, Nikon D5600, Nikon D7100, Nikon D7200, Nikon D7500.
Check Stock

HiLetgo 2pcs W1209 with Case 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-Channel Relay and Waterproof

  • 100% complete machine patch, wave soldering, stable performance, good consistency..
  • Embedded CPU chip (MCU), more intelligent, lower power consumption..
  • Automatic power set memory (MCU built-in EEPROM memory unit)..
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability..
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C.
Check Stock

Soldering iron pen 510 thread battery 1100Mah cordless solder iron kit tool with silicone cap

  • 510 THREADED INTERFACE:The soldering iron pen is made of stainless steel and has a 510 threaded interface for connecting a copper alloy soldering iron tip and a USB soldering iron charging cable. The soldering iron tips are made of high quality brass and have a power of 5W..
  • 1100Mah battery:The portable solder iron kit pen is powered with 5V 15W 1100mah Grade-A.About 2 hours on a single charge, 40 minutes of continuous work..
  • Adjustable temperature range: The temperature soldering tool has a two-way adjustable voltage knob and the temperature of the soldering iron can be adjusted. Adjustable range from 3.3V to 4.8V..
  • Smart USB Charger:Built-in smart IC power management chip to prevent overheating, over current, over voltage and short circuit problems, and automatically stop charging when fully charged..
  • How to use? 1: Screw on the tip voltage to 4.8 V maximum. 2: Press the power button for 5 times within 2 seconds after the power on. 3: This machine has 10 seconds timeout protection 4:during use,please use the silicone cap if the heating tips is very hot, the button light flashes indicates the battery low. Need to charge..
Check Stock

CREWORKS Soldering Rework Station with Hot Air Heat Gun 750W 2 in 1 SMD Rework Soldering Station Digital Solder Iron Station Welding Tool Kit with Heat Gun Set for Electronics Computer Repairing

  • Two-in-one ----- Attention: The voltage of this product is 110V. Rework station and soldering station combine in one, and you can separately control SMD rework and soldering. This machine will save you space, money and keep your work desk well-organized..
  • More Precise Temperature Control ----- Dual LED screens separately display the temperature of soldering iron and hot air gun. The temperature can be adjusted to be more accurate by using the double control volume button. Note: The hot air gun will immediately heat up when you pick it up. when the soldering pencil is placed on the stand over 10 minutes, the temperature will decrease automatically for safety concerns..
  • Super Quick to Respond ----- With the PID technology for even temperature control, the 750W hot air gun heats up to 480℃ in 5 seconds and the 70W soldering iron heats up to 200℃ in 7 seconds and keeps its temperature, the hot air gun blows at 120L/min for your work efficiency, the built-in fuse protection guarantees 100% safety during operation..
  • Wide Application ----- This product is designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and other temperature sensitive components, an essential tool for cell phone repair, laptop repair, or circuit boards soldering. Truly a ....
Check Stock

TXINLEI 8586 110V Solder Station, 2 in 1 Digital Display SMD Hot Air Rework Station and Soldering Iron, 12pcs Different Soldering Tips,Solder Wire,Tweezers,Desoldering Pump,700W 480℃

  • 【Rework & Soldering】 2 in 1 SMD Hot Air Rework Station and Soldering Iron..
  • 【Digital LED Display】 The product adopt microcomputer control,The hot air is digital LED display the temperature..
  • 【Solder Station Features】 High power,quick warming-up,Temperature stabilization and is impervious to air,,and long life and low noise. it have inductance in the hadle,it will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stopage..
  • 【Widely Used】 Designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering..
  • 【20-in-1 Full Kit】 The packing include: 1 * 8586 Solder station, 12 * Solder iron tips, 1 * 6in1 BGA tools, 1 * Desoldering pump, 1 * 100g solder wire, 2 * Tweezers, 1 * Soldering iron heater, 1 * Hot air gun heater, 1 * IC puller..
Check Stock

Hot Air Soldering Station, 2 in 1 750W Digital Rework Station with Hot Air Gun, Temperature Control Welding Station, Airflow Adjustable Desoldering Station

  • The soldering iron station kit is the combination of 60W Soldering Station and 750W Hot Air Rework Station, It supports the independents or simultaneous use of Hot Air Funct and Soldering Function..
  • Digital Soldering Station: 60W Output soldering iron with high-performance analog soldering station produces, Quality, lightweight pencil iron with cushioned foam grip for temp accuracy. 750W output hot air station with PID temperature sensor can quickly sense the real temperature change, and the temperature can be quickly and efficiently returned to achieve precise temperature control..
  • Super Function: This unit is loaded with Auto Cool Down Function,PID (Proportional-Integral-Derivative) Technology Program built into it which is commonly referred to as Magic Temperature Compensation Technology. Use the brushless fan, long life and low noise..
  • Overheat Protection - Various parts of the machine have fail-detecting and auto-shutoff functions, over-heat sensor, short circuit, open circuit, overload failure have automatic protection and will show on display, and the screen display H-E、 S-E to prompt the user..
  • What You Get – If for any reason you are not satisfied with your purchase, please contact us and we will make it right! Our products 100% quality insp....
Check Stock

Cordless Soldering Iron Station for Dewalt 20V Max Battery with LED Digital Display Auto-off / Sleep Mode Welding Tool for DIY, Appliance Repair, Watch Repair and Wire Welding (NO Battery)

  • Two Power Supply Ways: This 72w cordless soldering station works with DeWalt 20V/60V Flex XR Slide Style battery packs (Battery NOT Included). It also works with AC 20V 3A adapter (Adapter NOT Included)).
  • Quick Heating & High Precision: Fast heating up to 300℉ in 3 seconds, this soldering iron station comes with a high-precision temperature stabilization function, saving your waiting time and get your soldering jobs done more efficient and faster.
  • Intelligent Settings: With the internal micro-processor, you can set sleep or auto-off time / temperature as you want. Also, you can adjust the temperature from 140°F-788°F and temp unit according to your needs, so you can apply this solder station in a wider range of applications.
  • User-Friendly Design: The soldering station and the soldering iron holder are made into one unit, more compact and saving your precious working space. With Digital LED display, ON / OFF button, and temp adjustable knob, your soldering works would be easier.
  • Safe To Use: The soldering iron kit is made of high quality ABS and metal-alloy, with heat-resistant silicon wire, built-in low-voltage protection, anti-static design & ESD safe, it’s safe to use. The automatic cooling mode enables the machine cool automatically when on the ....
Check Stock