Top Self Tightening Chuck

LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)

  • 【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
  • 【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
  • 【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
  • 【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
  • 【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check Stock

Drum Sander, Sanding Drum Set 2.35mm Shank Rotary Sander, 180-5000 Grits Rotary Sander for Stone Polishing and Woodworking Set of 10 (1200 Grit)

  • Package contains: These sanding drums include 330 pcs sanding drums (80 grains, 120 grains, 240 grains) and 12 pcs sanding drum mandrels, extra gifts 2 pcs self-tightening drill chuck and 1 pc combination wrench, totally 345 pcs in 1 set.
  • Univeral drum mandrels - 12 pcs reusable drum mandrel shanks including 3 diameters(1/2.
Check Stock

DEWALT DCK590L2 20-Volt MAX Li-Ion 3.0 Ah 5-Tool Combo Kit with Titanium Pilot Point Drill Bit Set 21-Piece

  • 20V MAX hammer drill with patented 3-speed all-metal transmission and 1/2-inch self-tightening chuck.
  • 20V MAX reciprocating saw with key-less blade clamp allows for quick blade change.
  • 20V MAX 1/4-inch impact driver features 3 LED lights with 20 second delay to provide visibility.
  • Titanium pilot point for longer bit life.
Check Stock

0.3-3.2 Clamping Grinder Chuck Key M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)

  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Car Garages(Short tail M8x0.75 chuck + rod set)

  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Check Stock

Grinder Chuck Key Drill Chuck Carbon Steel M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

  • Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
  • Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
  • Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
  • Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
  • Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.
Check Stock

Carbon Steel M8 Easy to Use Grinder Chuck Key for 3-Jaw Mini Drill Bit(Short Tail M8x0.75 Chuck + Rod Set)

  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
Check Stock

AUSTOR 345 Pcs Sander Drum Kit - 330 Pcs Nail Sanding Drum Sleeves(80#/120#/240#) 12 Pcs Drum Manrels 2 Pcs Self-Tightening Drill Chuck and 1 Pc Combination Wrench for Dremel Rotary Tool

  • Package include - come with 330 pcs sanding drums and 12 pcs sanding drum mandrels, extra gifts 2 pcs self-tightening drill chuck and 1 pc combination wrench, totally 345 pcs in 1 set.
  • Essential 3 grits accessory - the sander drums contain 3 sanding grits(80#, 120#, 240#) and 3 diameters(1/2.
Check Stock

BT40 Drill Chuck Tool Holder CNC Drill Chuck Integrated Self Tightening High Wear Resistance Carbon Steel CNC Tool Holder for Milling Machines BT40-APU16

  • ...TEGRATED DESIGN: the integrated design has strong clamping force, efficient processing and heat treatment, high thermal strength, and is not easy to deform and durable. It is suitable for drilling and tapping centers/CNC machining centers, and is convenient, stable and more precise..
  • EASY TO INSTALL: Integrated self tightening drill chuck tool holder, easy to install and use. Simple structure, convenient loading and unloading, long service life. International standards, can be directly selected according to the model..
  • SERVICE GUARANTEE: If you have any questions about the drill chuck tool holder, our 24-hour support team will help you. If we can't solve your problem, you can contact customer service for replacement..
Check Stock