Top Self tapping Fastener Bolt

E-Z Lok Externally Threaded Insert 303 Stainless Steel 3/8 -16 Internal Threads 9/16 -12 External Threads 0.515 Length Made in US

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 316 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

50PCS Threaded Inserts,Self-Tapping Thread Insert,M3-M12 Thread Reinforce Repair Tool Self Tapping Thread Inserts Set for Plastic Copper

  • SUITABLE: The self-tapping thread insert is a kind of fastener that strengthens the thread, which can form a high-strength inner thread hole when embedded in a soft material such as plastic, copper. It can also be used to repair the damaged inner thread..
  • MATERIAL: Made of high quality stainless steel, it is of high hardness and low abrasion,Greatly improve strength and stability of screws connection.
  • ADVANTAGE: With certain elasticity and even load, it is resistant to vibration to avoid loosening,Long service life - it can be used repeatedly..
  • QUICK TO INSTALL: Easy and quick to install with only one assembly tool..
  • INSTALLATION METHOD: The self-tapping screw sleeve installation does not need to be threaded in advance. It can be directly screwed into the specific hole reserved for the base material with the installation tool. The same screw as the original can also be used for the female thread of the broken tooth. It is economical and beautiful. For new products It can also increase the thread strength.
Check Stock

Channellock 410 1-1/8-Inch Jaw Capacity 9-1/2-Inch Double Tongue and Groove Plier , Blue

  • Self Gripping Parrot Nose design ideal for round surfaces.
  • Right angle, laser heat-treated teeth grip better and last longer.
  • PermaLock fastener eliminates nut and bolt failure.
  • Patented reinforcing edge minimizes stress breakage.
  • High-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention.
Check Stock

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

  • ... durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance..
  • FEATURES - Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.A musthave tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
  • HOW TO USE - A broken bolt or screw may be removed from a hole with a Screw Extractor. First, drill a hole in the broken bolt. The correct drill size to use is stamped on each Screw Extractor. Insert Screw Extractor in the hole and, with a Tap Wrench, turn counterclockwise. The Screw Extractor acts like a corkscrew. It grips into the sides of the drilled hole and removes the broken part on its own threads without damaging the threaded hole..
Check Stock

Clayton Off Road COR-1100108 - TJ/LJ/XJ/ZJ Stainless Steel Front Spring Retainers

  • (2) Stainless Steel Spring Retainer(2) Self Tapping Bolt.
Check Stock

Craftsman LT1000 MOWERS Rebuild KIT 130794 134149 144959 153535 for Husqvarna Yard, Garden & Outdoor Living,Lawnmowers

  • (2) 130794 Complete Deck Spindle Assemblies [3 BOLT MOUNT TYPE].
  • (6) Self Tapping Spindle Mounting Bolts,.
Check Stock

4 Pcs 6\ Door Security Slide Latch Lock, Barrel Bolt Heavy Duty Solid Stainless Steel 304, Thickened 1/8 inch, 9.7 oz/Pack, Brushed Nickle

  • Material: heavy duty premium solid stainless steel 304, brushed nickle surface finish.
  • Size: length 6"(152 mm), width 1 ½"(38 mm), thickness ⅛"(4 mm), thickened bolt core, diameter ⅜"(10 mm).
  • Weight: 9.7 oz(275 g)-single, 2.6 lb(1180 g)-4 pcs.
  • Self-Tapping Screws: M4-20mm, length ¾"(20 mm), diameter ¼"(4.5 mm).
  • 8 mounting holes, 32 pieces screws stainless steel 304, making the bolt sturdy, and the latch core is flexible, smooth.
Check Stock

E-Z LOK - 653-6 E-Z Lok Externally Threaded Insert 303 Stainless Steel/Metric M6-1.0 Internal Threads 3/8 -16 External Threads 10.31mm Length Made in US Pack of 5

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 303 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, #10-32 Internal Threads, 5/16\-18 External Threads, 0.315\ Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 1/4\-20 Internal Threads, 7/16\-14 External Threads, 0.437\ Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

(8 Sets) 1/4-20 x 5\ Grade 5 Hex Bolts w/Washers & Nuts - Choose Size

  • ...ou’ll already have the type and size of the bolt, nut, or washer that you need right in front of you. Our hardware is made with high end stainless steel materials, ensuring a strong hold for practically any use, whether you are using them professionally, or in the comfort of your own home..
  • NUTS, BOLTS, & WASHERS: Fasteners come in many different forms, this set in particular contains three main types. One type is bolts, which are fasteners that require a nut (the second type) or pre-tapped hole to be installed. The third type is washers. This set includes lock and flat washers, which are used to distribute loads of threaded bolts, screws, and nuts evenly as the fastener is tightened. This assortment’s nuts, bolts, and washers can all be used in cohesion with one another..
  • A VARIETY OF SIZES: This bolt, nut, and washer set comes with all of the types of hardware and sizes that you need to complete your project with ease! In fact, the entire set includes over 1,200 pieces, plus a box to store everything in. The sizes of the cap screws range in size from ¼-20 x ¾ to ½-13 x 2, just to name a couple. The washers are available in either flat or lock styles, ranging in size from ¼ to ½. The hex nuts range in sizes from ½-13 to ¼-20..
Check Stock

Hillman Group Hanger Bolt, Hurricane Hardware, 25 Pieces, Rust-Resistant, Durable, Headless Fasteners, (1/4\ x 2 1/2\) Stainless Steel (707316)

  • Headless fastener with machine screw threads on one end and self-tapping threads on the other.
  • Designed to hang items like sheet metal and wiring from wooden structures.
  • Allows objects to easily be removed or replaced.
  • Assembly is complete when the end with the sharp tip is screwed into a pre-drilled hole.
Check Stock