Top Sell Metal Weld Bellows

Trinity College AP-1120 Anglo-Style Concertina 20-Button - Black

  • Laminated wooden endplates in high-gloss black finish.
  • Black fabric covered 11-fold bellows with shiny metal reinforcements.
  • Two attached straps with snap ends to close and lock bellows.
  • 20 buttons, 2 1/2 octave range, air-release button to close instrument noiselessly.
  • Plush lined, zippered black nylon carrying bag with fabric handle and one detachable, adjustable carrying strap.
Check Stock

Plast-aid Multipurpose Repair Plastic - 6 oz Kit

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
  • WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
  • EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
  • DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
  • APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check Stock

J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml

  • J-B Weld Clearweld: A Clear, Quick Setting And Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Surfaces Including Metal, Tile, Most Plastics, Ceramic, Glass, Wood And More. J-B Weld Clearweld Comes In A Syringe Allowing For An Easy 1:1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Clearweld Takes 5 Minutes To Set And 1 Hour To Cure. J-B Weld Clearweld Set And Cure Color Is Clear.
  • Strength: J-B Weld Clearweld Has Tensile Strength Of 3900 Psi.
  • Surface Applications: Metal, Most Plastics, Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And Glass.
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Hand Duster Puffer For Insecticide Dust Insect Dust Roach Powder Bed Bug Dust

  • The Bellow Hand Duster features new design enhancements that make it the “Professional’s Choice” when it comes to crack and crevice treatments of fine dust products into small areas. This bellow hand duster features a new bellows and spring that is much easier to compress and use than other similar dusters on the market. In addition, the clean-out rod comes with an o-ring for a tighter seal to prevent dust from escaping out the back of the duster..
  • The Puffer Duster has a 6.5 inch extension makes it easy to treat hard to reach places. The metal extension also features an insulated black tip to prevent a shock hazard when dusting near electrical outlets..
  • To use the duster, fill the rubber container (bellows) half-way full with an insecticide dust product such as Delta Dust or Pyganic Dust. It is also recommended to place a small rock in the duster to help break up the dust and prevent it from clumping. Compressing the bellows will cause dust to escape the metal tip of the duster. Using a duster allows you to inject dust more easily into cracks and crevices or inside wall voids where insects like to hide..
  • The Puffer Duster is For use in Treating hard to reach areas like cracks, crevices and inside wall voids on any indoor or outdoor space. Re....
Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml 2

  • J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
  • VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

THYGIFTREE Fireplace Bellows Indoor 19x8 Custom Large Wood Fire Blower with Hanging Strap, Long Handle, Metal Nozzle, Tool for Fireplace, Fire Pit, Wood Stove, BBQ, Fireplace Decor - Reindeer

  • Premium Material - Dimensions 19" X 8". Exquisite wooden surface, zinc-cast metal nozzle, crafted from rubber wood and heat-resistant artificial leather, combined with rivets..
  • Safety & Easy to Store - The bellows cleanly and easily pushes air out through the nozzle, largely reducing the risk of getting smoke in the eyes. It can be hung on the fireplace tool stand and stored beside the fireplace, chimney, wood stove..
  • Fireplace Decoration - The fireplace bellows is beautiful but functional.
  • Christmas reindeer is printed on the bellows. It adds a decorative touch to your fireplace and brings the perfect rustic country style to your home..
  • Useful Gift Idea - Perfectly-sized to fit comfortably in your hands, it is suited for use with indoor fireplaces, campfires, barbecue grills and fire pits. The bellows also make an ideal housewarming gift for a home with a fireplace..
  • Rest Assured Purchase - If any part of your order is less than perfect, please contact us.
  • we will solve the problem within 24 hours. We promise to do everything in our power to meet your expectations..
Check Stock

HITBOX MIG Welder 200A 110V/220V Dual Voltage Color Smart LCD Display IGBT Inverter Multifunction MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine MT2000Ⅱ

  • ... be needed. Please kindly note that WP-17V tig torch is not included in this package..
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little spatter, stable current, and good performance..
  • ★ 1 YEAR WARRANTY AND GREAT AFTER SELL SERVICE- HITBOX welder offers good warranty. If the machine can not work have other problem when working, please contact us at the first time, we can help you to fix it and we have agent in the United States, our agent will repair it for you. If finally we can not solve the problem, we will send you a new replacement..
Check Stock

NBK MWBS-28-8-14 Bellows Flexible Coupling, High Precision Welding, Bore Diameters 8 and 14 mm, Stainless Steel SUS304

  • The crest and root of the bellows are bonded by special high precision welding.
  • Thin metal plate molded with high precision allows higher misalignment to be accepted.
  • Even if there is misalignment, the constant revolution is performed.
Check Stock

NBK MWBS-28-14-14 Bellows Flexible Coupling, High Precision Welding, Bore Diameters 14 and 14 mm, Stainless Steel SUS304

  • The crest and root of the bellows are bonded by special high precision welding.
  • Thin metal plate molded with high precision allows higher misalignment to be accepted.
  • Even if there is misalignment, the constant revolution is performed.
Check Stock