Top Sensing Cable

IOGEAR 1-Port USB 2.0 Print Server, GPSU21

  • Easily connects USB 2.0, 1.1 printer to a network, allows multiple computers to share 1 USB printer on the network with the included Cat 5 cable.
  • Print from any computer on the network or from across the Internet.
  • USB cable and Ethernet cable used for connection.
  • 10Base-T, 100Base-T auto-sensing Ethernet Port.
  • Supports DHCP client and multiple network protocols.
  • Supports Telnet and web management software.
  • Backed by IOGEAR's 3-year and free lifetime US based technical support, Note : Refer to the PDF attached below in Technical Specification for manual and Troubleshooting step.
Check Stock

Fielect 30Pcs MC-38 Surface Mount Wired N.C Door Sensor Alarm Magnetic Reed Switch White

  • [Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm；Total Size: 27mm x 28mm x 7.5mm / 1.06" x 1.1" x 0.3"(L*W*H).
  • [Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
  • when the magnet separates, the circuit is not conductive ( light off )..
  • [Widely Usedl] - This Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

Fielect 2pcs MC-38 Surface Mount Wired N.C Door Sensor Alarm Magnetic Reed Switch White

  • [Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm；Total Size: 27mm x 28mm x 7.5mm / 1.06" x 1.1" x 0.3"(L*W*H).
  • [Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
  • when the magnet separates, the circuit is not conductive ( light off )..
  • [Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

Fielect MC-38 Surface Mount Wired N.C. Door Sensor Alarm Magnetic Reed Switch White, 1Pcs

  • [Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm；Total Size: 27mm x 28mm x 7.5mm / 1.06" x 1.1" x 0.3"(L*W*H).
  • [Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
  • when the magnet separates, the circuit is not conductive ( light off )..
  • [Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

Fielect MC-38 Surface Mount Wired N.O. Door Sensor Alarm Magnetic Reed Switch White 1pcs

  • [Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm.
  • Total Size: 27mm x 14mm x 7.5mm / 1.06" x 0.55" x 0.3"(L*W*H).
  • [Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
  • When the magnet together, the circuit is not conductive ( light off )..
  • [Widely Used] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

Fielect 2pcs MC-38 Surface Mount Wired N.O. Door Sensor Alarm Magnetic Reed Switch White

  • [Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm.
  • Total Size: 27mm x 14mm x 7.5mm / 1.06" x 0.55" x 0.3"(L*W*H).
  • [Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
  • When the magnet together, the circuit is not conductive ( light off )..
  • [Widely Used] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

Fielect 3Pcs MC-38 Surface Mount Wired N.O. Door Sensor Alarm Magnetic Reed Switch White

  • [Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm.
  • Total Size: 27mm x 14mm x 7.5mm / 1.06" x 0.55" x 0.3"(L*W*H).
  • [Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
  • When the magnet together, the circuit is not conductive ( light off )..
  • [Widely Used] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

30 Sqft Cable Set, Electric Radiant Floor Heat Heating System with Aube Digital Floor Sensing Thermostat

  • 30 Square Foot Under Tile Heating “Cable Set” (spool of wire), 120 Volts.
  • Highest Quality Heating Cable, Twisted Pair for Zero EMF, Single Cold Lead, Very Thin, 1/8″ thk.
  • Wire is laid out 3″ apart acroos the area to heat. Allows easy heating of odd shapes.
  • Includes Honeywell/Aube Digital Floor Sensing Thermostat with Floor Sensor Wire(model TH115-AF-120S).
  • Includes Cable Guides to secure to floor, Installation Monitor, and is UL Listed for US and Canada..
Check Stock

50 Sqft Cable Set, Electric Radiant Floor Heat Heating System with Aube Digital Floor Sensing Thermostat

  • 50 Square Foot Under Tile Heating “Cable Set” (spool of wire), 120 Volts.
  • Highest Quality Heating Cable, Twisted Pair for Zero EMF, Single Cold Lead, Very Thin, 1/8″ thk.
  • Wire is laid out 3″ apart acroos the area to heat. Allows easy heating of odd shapes.
  • Includes Honeywell/Aube Digital Floor Sensing Thermostat with Floor Sensor Wire(model TH115-AF-120S).
  • Includes installation monitor and plastic cable guides to secure wire to floor. UL LISTED for USA and Canada..
Check Stock

Fielect N.C. Recessed Wired Security Window Door Contact Sensor Alarm Magnetic Reed Switch White RC-35 1pcs

  • [Dimension] - Cable Length:250 mm；Sensing Distance:15-25 mm；Total Size: 32mm x 11mm/1.26" x 0.43" (L*D).
  • [Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
  • when the magnet separates, the circuit is not conductive ( light off )..
  • [Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

Fielect N.C. Recessed Wired Security Window Door Contact Sensor Alarm Magnetic Reed Switch White RC-36 1pcs

  • [Dimension] - Cable Length:250 mm；Sensing Distance:20-30 mm；Total Size: 25mm x 23.5mm/0.98" x 0.93" (L*D).
  • [Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
  • when the magnet separates, the circuit is not conductive ( light off )..
  • [Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock

Fielect 3Pcs N.O. Recessed Wired Security Window Door Contact Sensor Alarm Magnetic Reed Switch White RC-33

  • [Dimension] - Cable Length:250 mm；Sensing Distance:15-25 mm；Total Size: 17mm x 10.7mm/0.67" x 0.42" (L*D).
  • [Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
  • When the magnet together, the circuit is not conductive ( light off )..
  • [Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
Check Stock