Top Sensitive Current Measurement
AIOMEST Digital Clamp Meter 6000 Counts, TRMS Multimeter with Auto Ranging, Amp Meter Measures Inrush AC&DC Current, AC&DC Voltage, Resistance, Capacitance, Diodes and Temperature
- ✨【6000 COUNTS CLAMP METER】: AN-6205 clamp meter is professionally designed for electricity circuit properties measurement. Test a wide range of measurements including AC/DC Voltage 0.01mV~600V, AC/DC Current 0.01A~600A, Resistance 0.1Ω~60MΩ, Continuity and Diode Test..
- ✨【AUTO POWER OFF SAFELY】: When measurement exceeds 15 minutes without switching mode and pressing key, the meter will switch to standby mode. Press any key to exit standby mode. The auto power off mode can provide the voltmeter with a longer service life while also better protecting the battery..
- ✨【STRONG OPERABILITY】: Built with 1.34 inches large double open jaw and pick up AC/DC Current flowing through the conductor, increasing safety while improving this meter’s capabilities. Over-load protection circuit can effectively help you to carry out measurement work within the measurement range. Auto ranging and auto LCD backlight make your measurement more convenience..
- ✨【CONVENIENT FEATURES】: The avometer included relative value, MAX/ MIN, data hold, inrush current test and audible continuity test, ideal for electrical troubleshooting problems, circuit properties measurement, automotive repair and maintenance, lab, industrial and household applications..
Check StockAC Leakage Current Sensor High Accuracy Standard Flexible for Flat Cable Dense Place for Meteorology for Narrow Environment
- The position of the wire is located in the center of the test wire coil, and the influence of position error is less than 0.3% FS..
- Wide measurement range, high accuracy, strong reliability, the hysteresis effect is not affected by the external electric field, and has a noise free frequency band (0.1 Hz-1 MHz)..
- It can detect AC leakage current, large current, high-order harmonic current, complex wave current, transient pulse current, phase, power, power factor, etc..
- There is no exposed metal conductor in the coil, adopt non-contact measurement method, which is safe and reliable..
- It is small in size, light in weight, exquisite in appearance, soft and flexible, suitable for narrow environment and flat cable dense place..
Check StockMakerHawk Electronic Load Tester - USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Dischar
- ...there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
- Two power supply methods: 1. DC6-12V DC5.0 power supply.
- 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
- Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
- How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
- 2. Fast button twice capacity reset (mAh).
- 4. Fast button Four time reset (00:00:00).
- 5. Fast button five settings auto standby, Discharge count down regularly.
- 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
- 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x current).
- 10V input Approximately 18A discharge current 20V input Approximately 9A discharge current 30V input Approximately 6A discharge current..
Check StockMakerHawk Electronic Load Tester USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Discharge Resistance Power Tester
- ...there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
- Two power supply methods: 1. DC6-12V DC5.0 power supply.
- 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
- Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
- How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
- 2. Fast button twice capacity reset (mAh).
- 4. Fast button Four time reset (00:00:00).
- 5. Fast button five settings auto standby, Discharge count down regularly.
- 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
- 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x current).
- 10V input Approximately 18A discharge current 20V input Approximately 9A discharge current 30V input Approximately 6A discharge current..
Check StockBosch moisture meter UniversalHumid (precise results thanks to wood group selection and LED traffic light for easy interpretation)
- Fast measurement: Check moisture content of wood through pin-type-based detection technology as an orientation for the user.
- Use with different wood types: More precise results due to the possibility of selecting between two different wood groups.
- available sticker with some examples for each wood group in 12 languages can be attached to the tool.
- Convenient and simple use: Interpret the measurement results via the traffic light LED for the current measurement: red light – not recommended to use, yellow – of concern, and green – ready to use.
- Easy handling with 2 buttons: Wood selection button for selecting the wood group, measurement button to turn the tool on/off and save the current measurement on the display.
- Wide range of applications: Befor burning firewood, installing parquet flooring, furniture construction, for mould prevention, and many more.
Check StockAicevoos 528D Digital Clamp Meter Multimeter 4000 Counts Amp Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes
- MULTIFUNCTION DIGITAL CLAMP METER: Accurately measure AC current (do not measure DC current)! AC/DC voltage, frequency , resistance, capacitance, diode, continuity and temperature tests are also available. This clamp meter is a very useful tool for solving industrial and household electrical problems.
- NCV DETECTION FUNCTION: Non-contact voltage detection effectively checks the electrical status by measuring the strength of the electromagnetic field without touching any wires.
- when the multimeter senses a weak AC signal, the indicator light will be on..
- MULTIFUNCTIONAL: Support data hold, temperature measurement, automatic shutdown, low battery indication and continuity buzzer. High-definition backlit LCD display and LED flashlight make it easy to deal with dark environments..
- PROFESSIONAL MULTIMETER: Auto-ranging dial design and NCV non-contact measurement. HOLD for data hold function,FUNC for function switching, REL for DC measurement zero adjustment..
- LARGE JAW OPENING: The jaw opening measures AC current in conductors without touching or interrupting the circuit.To measure the current you need to clamp the meter around one of the wires and not the whole power cord. Its slim and compact size makes it easy to operate in tight spaces..
Check StockAmprobe ELS2A AC Line Splitter
- Allows current measurement on any 2- or 3-wire power cord.
- 1X loop for direct readings, and 10X loop for low-current measurements.
- Built-in voltage measurement jacks to check for voltage.
Check StockUNI-T UT61E+ 1000V 20A Digital Multimeter 22000 Counts Display NCV hFE Auto Range True RMS AC/DC Voltage Current Resistance Capacitance Tester
- True effective value, big screen and big characters..
- AC voltage/current frequency measurement..
- Data retention (H)/relative value (REL)..
- NCV measurement, sound and light alarm, automatic shutdown, backlight, high current overheating alarm..
Check StockKAIWEETS Digital Multimeter with Case, DC AC Voltmeter, Ohm Volt Amp Test Meter and Continuity Test Diode Voltage Tester for Household Outlet, Automotive Battery Test (Anti-Burn with Double Fuses)
- Customer Service: KAIWEETS provides a lifetime after sale service and technical support. This digital multimeter is included with 2 AAA batteries (pre-installed), comes with a carrying case and 2 decent cable leads..
- Multi-Function: This multimeter can test AC/DC Voltage, DC current (Can not for AC current), Resistance, Continuity, Diode Measurement..
- Sensitive Test: Please make sure the rotary switch is located at the right test range. Data hold function, backlight function helps you test clearly and quickly in a dim place..
- Safety Operation: IEC Rated CAT III 600V, CE and RoHS certified. Anti-Burn with double fuses. This multimeter has overload protection on all ranges..
- Widely Used: The Digital Multimeter is designed to be safe and accurate, and suitable for electrician test, household use, automotive, industrial electrical problems..
Check StockHOLDPEAK HP-866B-APP Digital Anemometer Handheld Vane Wind Speed Meter, APP Connect for Measuring Wind Speed, Temperature, Wind Chill with Backlight (Black)
- ★【High Sensitive & Accurate Measuring】Wind Speed Range from 0.3~30m/s,Temperature Range :-10℃~45℃,The Accuracy of Wind Speed is 5% of reading, Provides fast measurement for analysis of critical environment conditions..
- ★【Multifunction APP Anemometer】Wind Speed,Temperature and Wind Chill in one LCD Display. Measure wind speed in 5 units: m/s, km/h, ft/min, knots, mph..
- ★【Portable and Professional】Light weight and Small size,Through the built-in temperature regulator to adjust ℃/℉ temperature. Record and recall Max /Average /Current function..
- ★【APP Connect Anemometer】HP-866B-APP Anemometer with Mobile APP Support,you can connect to your smartphone via APP to monitor wind measurement in real time.With this APP-Anemometer, you can transfer the data and analysis it in real time on your phone..
- ★【Save Your Battery】Auto Power OFF, Manual / Auto Back Light Function, Low battery indication. With a screw hole, can be connected a lanyard.(Battery Included) HOLDPEAK come with 1 year warranty and lifetime technical support,if you have any questions,welcome to contact us!.
Check StockFluke I310S AC/DC Current Probe +/-100mA Resolution 300V AC/ DC Voltage 450A DC 300A AC rms Current
- Current probe is based on hall effect technology.
- Use in measurement of both DC and AC current.
- It may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
- Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A).
- Load impedance: greater than 10 k ohms and less than or equal to 100 pF.
Check StockAquarium Thermometer Sticker Fish Tank Temperature Sticker Brewing Thermometer Strip Adhesive Thermometer Sticker for Fish Tank Storage Tank Wine Jar by AikTryee
- 【Easy to Install】Aquarium thermometer simply pulled the backing off to reveal the adhesive back and applied to the front of your fish tank/aquarium/carboy/jar/fermentation bucket.
- Important Note: Remove the transparent protective film on the surface layer. Great way to keep a quick eye on your fish tank/wine jar/kombucha temp.
- 【Easy To Read】Thermometer strips is a piece of temperature sensitive paper.The colored marking shows the current temperature. If show multi-color,please choose the average value.
- 【WIDE TEMPERATURE TEST】Fish tank thermometer temperature range -39℉ ~ +97℉.
- Temperature measurement accuracy: ±1℉, If show multi-color,please choose the average value.
- It can be used in temperature sensing of many types of liquids, making your temperature measurement so simple..
- 【NO BATTERY REQUIRED】Aquarium Thermometers is mechanical and has a longer life expectancy in use, you don't worry about cold weather draining the battery since the analog work well but no batteries needed replacing.
- 【Package Includes】6 x Temperature Strip.
- The Thermometer quality assurance is 3 years. No more hesitation! Try it now!.
- Important Note: Remove the transparent protective film on the surface layer..
Check Stock