Top Serial Board

Pmnianhua Wall Mounted Folding Desk,Floating Wall Desk Hanging Computer Table for Wall Bedroom Small Space (Pink+White)

  • 【Sturdy structure】 Our wall-mounted computer desk is made of solid wood multilayer board material, which is strong and durable enough to meet your daily needs..
  • 【Ample Storage Space】Features multiple storage compartment, our computer desk provides spacious storage for you to store and display you items..
  • 【Space Saving】Wall mounted and fold up design make our computer perfect for compact space, it offers an ideal space-saving solution for those who want to store essential items and keep the room clean..
  • 【 Elegant & Modern Appearance】Clean lines and stylish design add a modern feel to your home or office, simple appearance make our foldable computer desk matches other furniture very well..
  • 【Size and installation】: The specification is: 32.36" L x 16.77" W x 35.43" H, the product provides an English version of the installation diagram, each board has an installation serial number, install according to the installation serial number order!.
Check Stock

EVISWIY PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack

  • 【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port..
  • 【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything..
  • 【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter..
  • 【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc..
Check Stock

Breckwell A-e-401 / C-e-401 Pellet Stove Circuit Board (1 RPM) - 2002 or Newer

  • Breckwell Control Board Fits Stove With 1 RPM Auger Motor, #(A-E-401).
  • This is the same control panel as the C-E-400 and C-E-401. It is just a newer, updated version and is completely compatible..
  • This control panel is used on most current model pellet stoves except the P22 and P4000 Classic Cast stove.
  • Additional Information Serial numbers are approximate and should not be the only source of validation for the part. Serial numbers may be off by as much as 10 units either way..
Check Stock

Major Brands 74LS11 Triple 3 Input Positive and Gate, DIP 14 (Pack of 10)

  • At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers..
  • The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches.
  • In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller..
  • You can link multiple registers together to extend your output even more..
Check Stock

Creality 3D Printer Part Limit Switch with Separate Package CNC for RAMPS 1.4 RepRap 3D Printer CR-10 10S,S4,S5,Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 (Pack of 3)

  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode..
  • 2.Serial port screen mode supports two printing modes: SD card and U disk..
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET).
  • Reserve the extension port of automatic shutdown after printing (PS-ON).
  • 5.2 sets of UART serial port extension ports are reserved for DIY use..
Check Stock

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega..
  • This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software s....
Check Stock

WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)

  • 【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
  • 【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • 【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
  • 【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • 【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..
Check Stock

GeeekPi 2Pack LCD 2004 Module with I2C Interface Adapter Blue Backlight 2004 20x4 LCD Module Shield for Raspberry Pi Arduino Uno

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures..
  • The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus..
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
Check Stock

Durablow TR1001 Gas Fire Fireplace Remote Control Kit for Millivolt Valve, IPI Module, Replaces Wall Switch (On/Off)

  • Breckwell Control Board Fits Stove With 1 RPM Auger Motor, #(A-E-401).
  • This is the same control panel as the C-E-400 and C-E-401. It is just a newer, updated version and is completely compatible..
  • This control panel is used on most current model pellet stoves except the P22 and P4000 Classic Cast stove.
  • Additional Information Serial numbers are approximate and should not be the only source of validation for the part. Serial numbers may be off by as much as 10 units either way..
Check Stock

AreMe Micro SD Card Adapter TF Card Reader for Gamecube Serial Port 2 (SD2SP2 Pro)

  • Ensure that there is a serial port 2 at the bottom of the Gamecube console and it can read directly..
  • Need to insert the SD2SP2 Pro adapter into the serial port2 of the gamecube, please pay attention to the orientation of the board when using, Inside or Outside..
  • The SD2SP2 Pro adapter needs to be used with swiss, xeno, GCloader Lite or pcioboot, and it will automatically load the TF card game list..
  • Support micro SD card with max memory of 512GB..
Check Stock

Icon Health & Fitness, Inc. Motor Lower Controller Board 399610 MC1648DLS Control Works with Epic Proform Reebok Nordictrack Treadmill

  • Latest Board version Part Name:CNTRLR,MC1648DLS ,ARPS,PROG Replaces mc2100LTS-50W (this is an OEM - Icon Upgrade).
  • Please check compatibility options in description..
  • If you are uncomfortable with diagnosing and treating your machine with the RIGHT replacement parts we can recommend a fitness technician in your area via zip code.
  • How to Buy Exercise Equipment Replacement Parts: Locate your Model Name & Model (Icon)/ Serial (All Other Manufacturers) Number. Then find the information in product description. For Serial Numbers the first 2-5 characters will suffice.
Check Stock

BIGTREETECH TFT35 V3.0 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work....
  • 2.Serial port screen mode supports two printing modes: SD card and U disk..
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET).
  • Reserve the extension port of automatic shutdown after printing (PS-ON).
  • 5.2 sets of UART serial port extension ports are reserved for DIY use..
Check Stock