Top Serial Device Interface

DTECH DB9 9 Pin Serial Cable 6ft Male to Male RS232 Straight Through

  • 9 pin male to male adapter connects your computer to device with RS-232 compatible (COM) interface (NOT VGA cable for computer to monitor).
  • Serial cable male to male DB9 connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • It is pin to pin wired as a DE9 serial Straight Through cord (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G).
  • 6 feet short serial adapter DB-9 cable for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (15 Feet, Black)

  • 15ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable male to female extender with AL foil.
  • DB9 female to male connector on each end equipped with screws to ensure an easy and solid extension connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 15 feet long null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

HUAZHU AT-09 1PCS Bluetooth 4.0 Module Transceiver BLE CC2540 CC2541 HM-10 MLT-BT05

  • ฅฅ It adopts CC2541 chip of American TI Company, configures 256Kb space, and follows V4.0 BLE Bluetooth specification..
  • ฅฅ Input voltage: 3.3V/5V only needs a set of power supply..
  • ฅฅ Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • ฅฅ It supports UART interface and supports SPP Bluetooth serial port protocol..
Check Stock

Pololu Mini Maestro 18-Channel USB Servo Controller (Assembled) (Item 1354)

  • The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver.
  • This fully-assembled version ships with header pins installed.
Check Stock

DTECH DB9 to DB9 RS232 Serial Cable Male to Male Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • (Not for computer monitor VGA-video connection) Simple serial null modem cable (3 wire type and no hardware handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a DE9 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded rs232 cord with AL foil.
  • DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short serial adapter male to male for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipmentrs.
Check Stock

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

Pololu Mini Maestro 24-Channel USB Servo Controller (Partial Kit) (Item 1357)

  • The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver.
  • Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).
Check Stock

GoControl CECOMINOD016164 HUSBZB-1 USB Hub

  • Provides interface between PC and Z-Wave/Zigbee network.
  • Plugs into a standard USB port on the host device.
  • Works with third-party home automation software.
  • Z-Wave Plus certified for wide compatibility.
Check Stock

KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board

  • This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
  • The USB-to-Serial chip of this board is stable and compatible CP2102.
  • Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
  • Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
  • Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)

  • 1.5ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable male to female with AL foil.
  • DB9 female to male connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like PTZ, scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

MOXA NPort 5150A - 1 Port RS-232/422/485 Serial Device Server, 0 to 60°C Operating Temperature

  • Connect to configure and remotely manage an RS-232 serial device over an IP network.
Check Stock

DORHEA 5PCS DHT22 AM2302 Digital Temperature and Humidity Sensor, AM2302 Temp Humidity Monitor Sensor Replace SHT15 SHT11 for Raspberry Pi

  • DHT22 main chip is AM2302 high sensitive temperature humidity sensor. Single-bus digital signal output, bidirectional serial data..
  • 4 Pins Sequence Number: Pin1-VDD(Power 3.3V-5.5V).
  • Pin2-SDA, serial data interface, two-way interface.
  • The DHT22 is a reliable sensor for determining temperature and humidity. The output is serial as a digital bit sequence.The sensor is ideal to monitor the room climate or to build a weather station..
  • Each AM2302 sensor is calibrated in a very accurate humidity calibration room. The calibration coefficients are stored in OTP memory in the form of programs that the calibration coefficients are invoked within the sensor during signal processing..
  • Single-wire serial interface, the system integration becomes simple and quick. Ultra-small size, low power consumption, signal transmission distance up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications. Products are 4-pin single row pin package, easy to connect..
Check Stock