Top Serrated Gasket With Outer

Zonon 9 Pieces Replacement Gasket Compatible with Hydro Flask Wide Mouth Bottle Flip Lid Cap Silicone Replacement Gasket Seals

  • Wide application: the water bottle gasket measures 2.03 inch/5.75cm in outer diameter, 2 inch/5.1cm in inner diameter.
  • Only fit for 18, 20, 24, 28, 32, 40 and 64 oz wide mouth water bottles lid, compatible with Hydro Flask water bottle, please check for size before purchasing.
  • Sufficient quantity: you will receive 9 pieces gaskets seals replacement that are compatible with Hydro Flask wide mouth lid, enough quantity for your daily use and replacement, without worrying about running out.
  • Quality silicone material: the gaskets are made of quality silicone material, which not only have good flexibility, but also durability.
  • Besides, the gasket don’t contain BPA and can be applied with confidence.
  • Good sealing performance: warped or worn out gaskets can cause leaks.
  • You can replace the broken one or dirty one in time to get well sealed.
  • The lid gasket replacement can keep the lid clean and leakproof, so you can keep your bottle for a longer time.
  • Easy to install: these silicone replacement gasket seals are easy to install, no tools needed.
  • You simply press the gasket into the edge of the lid, and complete the installation in a few seconds.
Check Stock

Ticon Industries - 2 Bolt MLSG High Temp Exhaust Gasket 3" I.D. (Qty 2) - Heavy Duty - 120-07610-0002 (3 Inch)

  • Compatible with 3" 2-Bolt Flanges that have a 3"/ 76.2mm Flange ID.
  • Bolt hole center spacing 105mm/4.13".Minimum inner bolt to bolt distance of 90mm/3.55" Maximum outer bolt to bolt distance of 121mm/4.76".
  • Heavy Duty MLSG Construction For Extreme Environments. Multi Layer Stainless Steel and Graphite Construction with a 2mm/.078" gasket thickness..
  • Integrated 2mm/.078" x 2mm/.078" Stainless Steel Fire ring to prevent failure between gasket layers and gasket "Blow Out".
Check Stock

5 Packs Blender Gasket Replacement Rubber Gasket Seal, Compatible with Cuisinart CBT-500, SB5600, CB600, SPB-456-2B and Oster and Osterizer Blenders

  • Functional: you can use them to replace the old or broken one, and this gasket is elastic and stretchable, please ensure optimal fit in order to prevent fall off when you removed the cover.
  • Size information: the outer diameter of rubber blender gasket is about 6.6 cm/ 2.59 inch, the inner diameter is about 4.85 cm/ 1.9 inch, before buying, please check your blender size carefully.
  • Material: the blender gasket replacement is made of rubber, soft and durable material for better sealing and prevent leaking of blender, reusable and non-toxic material for fruit juice making.
  • What you get: 5 packs rubber blender gaskets are packed together, can be applied for a long time.
  • Note: the brand mentioned is not working as trademark, just applied to demonstrate compatibility.
  • Suitable for: this blender gasket is compatible with Cuisinart blenders, Oster and Osterizer Blenders ,please check the model before you buy it.
Check Stock

6 Fins Extractor Blades Replacement Part for Ninja Blender fit for Nutri Ninja Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz 32 oz (1)

  • ✅NUTR# NINJIA 6 FIN Blade for Nutri Ninja Blender ONLY FITS models:900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
  • ✅Package Include: 1 x 6 Fins Extractor Bottom Blade Replacements for Ninja series Models(Each has Gasket Rubbers), 1 x Extra Gasket Rubbers(Extra gift)..
  • ✅【Note Tips】Tip1:The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade. Tip2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket..
  • ✅Safe and high quality:The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable food-grade PP material, not easy to break and scrape..
  • ✅Statement:The blades replacement 6 fins for ninja we sell is not an original product. Design and production are in line with original standards. It can functionally reach the same level as the original.
Check Stock

Pack of 5 Compatible Replacment filter set for GE GXWH04F GXWH20F GXWH20S GXRM10 GX1S01R Compatible Filters, 5 Micron Water Filter Cartridges by IPW Industries Inc.

  • Perfect Replacements: Perfect replacement o-rings / gaskets / seals for GE (TM) 2.5 in water filter housings. Compatible with models GXWH20F, GXWH04F, GXRM10, GXWH20S and GX1S01R - whole home water filtration system.
  • Replace Your Lost Or Loose Gasket: Gaskets get lost periodically and get warped/worn out over time. A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky mess. Always have a spare on hand!.
  • Made From High-quality Rubber: Our gaskets are made from high-quality, durable rubber and are made to last. BPA/Phthalate free. The Gasket is a replacement for GE 2.5 inch water filters and the gasket measures 3 5/16 inch inner diameter - 3 9/16 inch outer diameter.
  • Save Money, Easy To Install: Replacement gaskets for these filters are often hard or expensive to find - don't waste money on expensive replacements! Easy-to-install. 6 gaskets per pack.
Check Stock

MECCANIXITY Bonded Sealing Washers G1/2 28.5x19x3.4mm Carbon Steel Nitrile Rubber Gasket, Pack of 10

  • The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal.
  • Nitrile Butadiene Rubber (NBR): Hardness: 60A.
  • Working Temperature Range: -20°C to 100°C (-4°F to 212°F).
  • Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
  • The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines.
Check Stock

American Standard A918657-0070A

  • Dimension: 160 x 139 x 128mm/6.3" x 5.5" x 5"(L*W*H).
Check Stock

Kohler K-1122-GHLAW-96 Archer Bathtub, Biscuit

  • Dimension: 160 x 139 x 128mm/6.3" x 5.5" x 5"(L*W*H).
Check Stock

REPLACEMENTKITS.COM - Brand fits Yamaha® Clutch Crankcase Outer Cover Gasket Bearing & Seal Kit for Rhino & Grizzly 660 -

  • Replacement Kits Yamaha Clutch / Crankcase Outer Cover Gasket, Bearing & Seal Kit for Rhino 660.
  • Replaces 5KM-15463-00-00, 93316-01003-00 (Bearing) & 93102-35004-00 (Oil Seal).
  • Gasket is Made in the USA & Coated on 2 sides.
Check Stock

Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 6 Fins Replacement Extractor Blade for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL450-70 BL451-70 BL482-70

  • 【Apply To】The 6 Fins Blade is suitable for Nutri Ninja Auto iQ BL450-70,BL451-70,BL454-70,BL456-70,BL480-70,BL480D-70,BL481-70,BL482-70,BL490-70,BL487-70,BL488W-70,BL487A-70,BL486CO-70,BL491-70,BL492-70,BL492W-70 (Only fit for 12oz,16oz, 24oz, 32 oz cup)..
  • 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover.
  • The outer is made of durable PP material, Not easy to break and scrape..
  • 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade..
  • 【Packing Include 】1 x 6 Fins Bottom Blade Replacements, 1 x Replacement Gasket Rubbers ( One Gasket Rubber already on the 6 Fins replacement blade). Please make sure your Ninjia blender base has 6 Fins before order !.
  • 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can..
Check Stock

Ninja Blender Replacement Parts 7 Fins Bottom Blade for Nutri Ninja Auto iQ BL482 BL2013 BL685 BL682 BL642 NN102 BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins)

  • 【VERSATILE USE】: Ninja blender accessories, Ninja replacement parts help you process food quickly! Enjoy the right consistency and fresh taste of your smoothies, fruit salads or creamy soups.
  • 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket..
  • 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade)..
  • 【HIGH QUALITY】: The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape..
  • 【FITS FOR】: This 7 fins Blade for Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
Check Stock

4 Packs 7301111-0070A Flush Valve Seal Kit for American Standard Toilets, Replacement Parts for Champion 4 Tank and Eljer Titan 4 Model toilets, Replace for 012611410444

  • Good replacement: the 7301111-0070a flush valve seal kit is made of quality and durable rubber, the gasket outer diameter is 4 1/4 inch, o-ring outer diameter is 9/16 inch, please confirm the size before purchasing.
  • And it can replace for part 012611410444.
  • Range of application: compatible with american standard champion 4 and Eljer Titan 4 model toilets, also compatible with other universal toilets with equivalent flush valves.
  • Package includes: you will receive 4 x 7301111-0070a flush valve seal kit, sufficient quantity for you to replace the old or damaged one and convenient for you to repair your toilet.
  • Create greater flushing power: toilet gasket seals wear out over time and need to be replaced in a timely fashion to create better flushing pressure and reduce toilet flushing noise.
  • Easy and quick installation: it will only take a few minutes for you to complete the installation follow the instruction (instruction included).
  • Warm note: This is an aftermarket replacement product (not original), the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
Check Stock