Top Servo Extension Leads

5 Pcs JR/Futaba Style Servo 1 to 2 Y Harness Leads Splitter Cable Male to Female Extension Lead Wire for RC Models Airplane 7cm

  • Y Servo Leads are durable, soft and light.
  • Servo Plug Type: Futaba compatible with JR / Spektrum / Hitec.
  • Work with RC Cars, Planes, Helicopters, & Drones. It can be used to control 2 servos at the same time..
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

Miuzei 20KG Servo Motor High Torque Digital Servo Metal Waterproof Servo for R/C Car Robot, DS3218 Control Angle 270°

  • DS3218 20kg digital servo,accuracy with precision potentiometers, high quality leads and center nicely..
  • High torque steering servo for robot arm,boats,vehicles and remote control toys..
  • Size:40*20*40.5mm Weight: 60g Operating voltage range(4.8-6.8V) Dead band width:3 μsec.
  • Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Waterproof performance: IP66.
  • Please Note: To use a 20kg steering gear, you need to ensure the correct line connection, provide 500~2500usec pulse signal, meet the power supply voltage of 4.8V~6.8V.
  • when the input signal reaches 2500usec, the angle rotates to 270 degrees).
Check Stock

Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Outputs for Jetson Nano Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B Supports SG90 MG90S MG996R etc @XYGStudy

  • Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface.
  • Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to....
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later version, Jetson Nano.
  • I2C controlled, using only 2 pins Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Check Stock

15PCS ShareGoo 150mm Male to Female JR Plug RC Remote Control Servo Extension Lead Wire Cable

  • Connector Type：JR male & Female plug,compatible each other..
  • For RC Car, plane and helicopter servo connection or receiver connection..
  • Servo extension cable, 3 pin female to male connector..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

Goupchn Multimeter Test Leads Kit 21PCS Digital Electrical Test Probes Set with Alligator Clips Mini Grabber SMD IC Test Hook Clips Test Tweezer Replaceable Precision Sharp Probes

  • ...le probes set has 4pcs 1mm gold-plated sharp needles and 4pcs 2mm copper needles. They can be switched to meet your different testing needs and ensure high strength, conductivity, long life and accurate data. Voltage: 1000V. Current: 20A..
  • Mini Grabbers: Mini grabber test hook clip has a retractable clip hook and an extension lead which provides safe and secure connections for clamp and any terminal block. The front end of the hook is retractable with a spring, so objects can be firmly hooked. Perfect for continuity testing of circuit board components, resistors, logical analyzer capacitors or other SMD components..
  • Test Tweezer: Test leads set also contains a test tweezer. Suitable for resistor, capacitors and other SMD components. Non-slip comfort grip, it is convenient to use with one-handed operation of multi-function testing. Length: 15.3cm/6inch..
  • Wide Use: 21PCS multimeter test leads kit works perfectly with any multimeter and test instrument. Replaceable needles, banana plug adapters, alligator clips, mini grabber SMD IC test hook clips and test tweezer can help expand testing capability and flexibility..
  • Package include: 2PCS Multimeter Leads, 8PCS Replaceable Needles, 2PCS 4mm Banana Plug Connectors, 2PCS U-Type Adapters, 2PCS Heavy Duty Alliga....
Check Stock

Staedtler Comfort 4 Pc Metal 6\ Quick Setting Compass Set, 552 02

  • Compass 6" Metal, 4 pc set- compass, universal adapter, extension bar, plus extra needle and leads..
  • Quick setting with push button mechanism & center wheel.
  • Comes in hard plastic case with hinged lid.
Check Stock

Goupchn Silicone Multimeter Test Leads Kit 25PCS with Replaceable Gold-Plated Precision Sharp Probe Set, Alligator Clips, Minigrabber Test Hooks and Wire Piercing Test Probes

  • ...s kit works perfectly with any multimeter and test instrument. Replaceable probes, wire piercing probes, alligator clips, spade plugs, mini grabber SMD IC test hook clips can help expand testing capability and flexibility..
  • Package include: 2PCS Silicone Multimeter Leads, 2PCS Minigrabber SMD IC test hook clips with extension leads, 10PCS Replaceable Probes, 2PCS Handles, 2PCS Tip Shrouds, 1PC wrench, 2PCS Alligator Clips, 2PCS Piercing Probes, 2PCS Spade Plugs, 2PCS Minigrabber to Stackable Banana Plug Leads, 1PC Transparent Storage Box..
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Single 1 AA Battery Holder, 1 X 1.5V AA Battery Holder, AA Battery Holder with Leads Wires (5-Pack)

  • Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
  • Package Contents: 5Pcs 1 aa battery holder with wires.
  • Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
  • Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
  • Weight of "single aa battery holder": 0.141oz/4g.
  • Leads: all aa battery holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
  • Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
  • Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..
Check Stock

LAMPVPATH (Pack of 4) AAA Battery Holder, 2 X 1.5V AAA Battery Holder with Leads, AAA Battery Holder with Wires

  • Package includes 4Pcs aaa battery holder case box: 2 aaa battery holder, 2x 1.5V aaa battery holder with leads.
  • One 2xAAA Battery Holder Voltage Output: 3V, 2 x 1.5v aaa battery= 3v aaa battery holder.
  • Dimensions of Battery Holder for AAA: 2.082" x 0.948" x 0.516"/5.29cm x 2.41cm x 1.31cm(L*W*H).
  • Weight of One 2 AAA Battery Holder with Leads: 0.176oz/5g.
  • Leads: all 2 aaa battery holder with leads, they are tinned wire end.
  • Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 2 X 1.5V 2 aaa battery holders with wires can get a 4-aaa 6v battery holder.
  • Join three 2 X 1.5V aaa battery holder 2 can get a 6-aaa 9V battery holder, Join four 2 X 1.5V aaa battery holder can get a 8-aaa 12V battery holder. So, 6Volt aaa battery holder, 9Volt aaa battery holder and 12Volt aaa battery holder are also on your hands..
Check Stock