Top Servo Extension

Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Outputs for Jetson Nano Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B Supports SG90 MG90S MG996R etc @XYGStudy

  • Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface.
  • Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to....
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later version, Jetson Nano.
  • I2C controlled, using only 2 pins Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Check Stock

15PCS ShareGoo 150mm Male to Female JR Plug RC Remote Control Servo Extension Lead Wire Cable

  • Connector Type：JR male & Female plug,compatible each other..
  • For RC Car, plane and helicopter servo connection or receiver connection..
  • Servo extension cable, 3 pin female to male connector..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

WEISHUJI 25T Servo Horn Steering Arm, Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm for Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)

  • 25T Servo Horn Steering Arm fits for Traxxas TRX4 Axial SCX10, SCX10 ii 90046 1:10 scale rc crawler, and Servo Horn 25T Steering Arm is CNC machined..
  • 25T Servo Horn Steering Arm has 18mm and 22mm threaded mounting holes for adjustability, and Servo Horn 25T Steering Arm is of high quality..
  • 25T Servo Horn Steering Arm is Red-Black, and Aluminum 25T Servo Horn Steering Arm is of small size and lightweight..
  • 25T Servo Horn Steering Arm works on Futaba, Savox, Emax, HSP, Power HD, Xcore, Aluminum 25T Servo Horn Steering Arm works on other popular prand servos motor (Except Hitec and JR Servos)..
  • Package of 25T Servo Horn Steering Arm includes: 1 x 25T Servo Arm (Red-Black), Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm.
Check Stock

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

  • 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
  • 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
  • 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
  • 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
  • Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock

Micro Machines Playtronic MAX

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

ZHIPAIJI for FLYWING FW200 rc Helicopter Spare Part Servo Arm FW200 Parts FW219

  • Metal 25T Servo Arm Round Type is suitable for Hitec, Parallax, Futaba and other brands (40x20x36mm) standard servos..
  • Metal 25T Servo Arm Round Type Material is CNC Aluminium..
  • Metal 25T Servo Arm Round Type Mounting Hole Spacing is 14mm..
  • Metal 25T Servo Arm Round Type Servo disc diameter is approx 20mm..
  • Package of Metal 25T Servo Arm Round Type Includes: 5 x Servo Accessories Disc 20 x Screws.
Check Stock

Que-T Brass Steering Servo Horn Arms 3.1/4.1/5.1mm for RC Car Boat Rudder Parts (Brass, 4.1mm)

  • Suitable--The servo arm is suitable for EMAX ES08MA II/ES08MD II Servo (For Axial SCX24 Crawler)..
  • High Quality--Our rc servo arm is made of aluminum alloy material, not easy to corrode, construct for precision and durability..
  • High Precision--CNC machining makes it precise in size and stable in performance..
  • RC Servo Bracket--This servo arm comes with a servo bracket, which is made of high quality aluminum, anodized and durable..
  • What You can Get--A rc servo arm with some screws, easy to install, and a rc servo bracket..
Check Stock

Thunder Tiger RC Rudder Servo Gear Set Innovator

  • ☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
  • ☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
  • ☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
  • ☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
  • ☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.
Check Stock

BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）

  • 【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Check Stock

LAFEINA Aluminum Alloy 25T Adjustable Damping Servo Arm for 1/10 RC Crawler Car Traxxas TRX4 TRX6 Upgrade Parts (Titanium)

  • 25 Teeth Spline Steering Arm is CNC machined, and Spline Steering Arm Server Rocker makes it precise in size and stable in performance..
  • 25 Teeth Spline Steering Arm is compatible with Futaba Savox Emax HSP Power HD Xcore & Other popular prand servos motor, and 25T Servo Horn does not fit for Hitec and JR Servos..
  • 25 Teeth Spline Steering Arm is a great replacement part, and 25T Servo Horn fits for 1/8 1/10 RC Car Crawler..
  • 25 Teeth Spline Steering Arm includes a distance from hole center to hole center: 15mm, 18mm, and 25T Servo Horn 25 Teeth Spline Steering Arm is made of Aluminum alloy, strong and durable..
  • Package of 25 Teeth Spline Steering Arm includes: 1 x 25T Metal Servo Arm, Red, Spline Steering Arm Server Rocker, 25T Servo Horn 1 x 25T Metal Servo Arm, Black, 25T Servo Horn, 25T Servo Horn 25 Teeth Spline Steering Arm.
Check Stock