Top Servo Motor Voltage Regulator

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

  • [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
  • [Interface type] This SG90 servo is compatible with JR & Futaba interface.
  • [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
  • [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.
Check Stock

Adjustable Digital display 10-55V 60A PWM DC Brushed Motor Speed Controller Switch Control 12V 24V 36V 48V Forward Brake Reverse For power wheels regulation (60A PWM)

  • The input voltage must be equal to the rated voltage of the motor.Wide Voltage: Wide voltage input 10-55V, maximum output current 60A,Continuous current: 40A..
  • Digital display :Motor Rotation Speed Percentage 0~100% ,Accurate adjustment speed.Adjust Output Current Control Motor Speed.
  • Speed Control Knob:Stepless speed regulation ,and with Forward-Brake-Reverse Switch.Only Work for Brushed Motor..
  • Notice 1: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • Notice: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
  • 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
  • ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

Weytoll 30KG Motor Servo High Torque Metal Gear Digital Servo Waterproof for RC Car Robot Boat with 25T Arm Control Angle 180°

  • 【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
  • 【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
  • 【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
  • 【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • 【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.
Check Stock

DWEII MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Pack of 3

  • Stall torque: 12kg/cm(6V), 13kg/cm(7.2V). Recommended voltage: 5V, current usage: 3A.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
  • Dimension:40.7*19.7*42.9mm(1.6*0.78*1.69in).
  • This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
  • Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • Compatible with most standard receiver connector.
Check Stock

Yonntech Auto Transformer 2000W 20Amp AC Variable Voltage Regulator 2000VA 0-130V Output Autotransformer 110V

  • 2000VA variable voltage regulator input voltage: 110VAC / 60Hz. It is a contact voltage regulator with wide voltage range (0-130V)..
  • The autotransformer with a exquisite rotating handle,comfortable grip and flexible operation, easy to control output voltage what you need..
  • The auto transformer is built-in good quality material copper coil, and with thermal grid design is more easy let the machine cool, more secure and....
  • This 2KW autotransformer be widely used in motor speed control, label printing machine, EE labs, test for railroad switching, power supplies,....
  • Please note that most device have surge (when first turn on) much higher than operating amp rating. E.g, motor with 10 amp rating may have over 20 amp....
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

JX CLS6336HV 35kg Aluminium Shell Metal Gear High Voltage Coreless Digital Servo for RC Models Helicopter Accs

  • JX ecoboost Servo CLS6322HV high voltage coreless digital servo..
  • High-performance digital standard servo, high-precision and high-precision metal steering gear..
  • Double ball bearings, high torque of 21 kg-cm..
Check Stock

MMOBIEL Micro Servo Motor Kit MG995 55g 360° for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots / Compatible with Arduino Projects and Raspberry Pi Incl. Screws and 4 Servo Arms

  • ...ut Together with Care. to give You the Best Experience in Controlling Your Remote Controlled Vehicle. Interface Type: Compatible with JR & FUTABA interface..
  • Servo Motor Specs: No Load Running Speed: 0.09±0.01 sec/60° Degree at 4.8V.
  • Stall Torque (4.8V): 152,76 oz/inch / 11kg/cm, Type: Analog Controller, Operating Voltage: 4.8V - 6.0V, Left & Right travelling Angle deviation: ≤ 6° Degree, Centering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
  • Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
  • Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..
  • High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..
Check Stock

VATOS Spirit Brushless 52km/h High Speed RC Cars 1:16 Remote Control Monster Truck 4WD All Terrain Off-Road 2.4Ghz Shockproof Waterproof RTR Hobby Cars for Intermediate Hobbyist (1：16)

  • ...p to 52km/h, compared with the brushed motor, the brushless motor has 2-3 times life span, 1/3 energy consumption and lower noise.
  • 【INTELLIGENT ESC PROCTECTION】: The 35A electronic speed controllers (ESC) receiver has a variety of intelligent protection functions,Including over-current protection and battery low-voltage cut-off protection functions，IPX4 waterproof level provides all-round and angle splash water protection, can be splashed water from different angles, but don't submerge it underwater.
  • 【DURABLE BODY STRUCTURE】: Anti-corrosion, high strength, anti-impact PA material chassis and Reinforced Body Frame make the RC car not east to break. Aluminum alloy damping springs, widened suspension system and vacuum rubber tires, all-terrain adaptation, whether on rugged slopes or rough mountain roads are as usual.
  • 【UPGRADE DIGITAL SERVE】: 3-wire digital Servo, 1.8kg pull force, 300 pulses per second, compared with analog servo, digital servo provides higher accuracy and better fixed power, faster response, Softer and faster acceleration and deceleration. Digital servo provides higher precision and better fixed power and anti-shake function.
  • 【MORE PARAMETERS】: 2 speed mode, 4 wheel drive,2.4Ghz, 80-90m control distance, 7.2V, 60-70 mins ....
Check Stock