Top Servo Multiplexer Board

Premium Mini CCTV Video Recorder with Split-Screen Views + IR Remote

The 4Ch Video Color Quad Multiplexer allows several video signals from CCTV security cameras or other analog video devices to be combined and displayed on one monitor. The video processors are also commonly referred to as video mux, CCTV multiplexer, or color quad processor..
4 Channel Color Quad Multiplexer, Loopout Function, Build-In Buzzer.
Multiple Display Modes: 4 pictures, 2 pictures, 1 picture.
Video Input: 1.0Vp-p75 ohm, Tape Input/Output: 1.0Vp-p75 ohm.
Working Voltage: DC12V/1A, Environmental Temperature: -30°C-60°C.

10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
Great for jumping from board to board or just about anything else..
There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
Length:100mm Type:JR Plug Servo Extension wire (Male to Male).

Process Digital Signals: Because the multiplexer can also process digital signals, you can use it to transfer TTL level serial data to multiple devices through pipe or transfer from multiple devices..
High Level: Drive it to high level, and it will completely disconnect the common pins (all switches are disconnected)..
Scope of Application: It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
16 Channel Analog Multiplexer: This is a very convenient 16 channel CD74HC4067 analog, digital multiplexer, demultiplexer..
Bidirectional Internal Switch: With a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..

【16-channel Analog Multiplexer】- This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
【Used for】- It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
【Process Digital Signals】- Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
【Bidirectional Internal Switch】- The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on..
【Note】- Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..

Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
This servo Y-cable allows you to control two servos with one radio channel..
Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..

Upgraded from the original basis, MultiPort has multiple connection ports.
You can use it as a hub to add I2C devices to the bus as you need, including mounting holes, so the board can be fixed to any system.
There are 4pcs 1.00mm 4-pin female connectors and Mounting Points.
All boards that support 1mm pitch 4-pin JST connector, which can reduce the required PCB space..
To make using this multiplexer easier, all communication is done via I2C using our convenient Qwiic system..

★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
★6ns break-before-make @ 4.5V,"On" resistance: 70 Ohms @ 4.5V.
★Wide operating temperature range: -55C to 125C.
★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above.

This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
Includes a total of over 190 electronic parts and components.

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)..
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction..
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prev....

micro:bit edge connector, directly pluggable.
2x DC motor interfaces, 3x servo interfaces.
Integrates 5V regulator, up to 3A output current.
Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.

This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
Uses I2C input, just occupy A4 and A5 interface on the control board.
Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
Servo power supply independent V + input up to 6V.
How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..