Top Servo To Digital Board

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

JX CLS6336HV 35kg Aluminium Shell Metal Gear High Voltage Coreless Digital Servo for RC Models Helicopter Accs

  • JX ecoboost Servo CLS6322HV high voltage coreless digital servo..
  • High-performance digital standard servo, high-precision and high-precision metal steering gear..
  • Double ball bearings, high torque of 21 kg-cm..
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

VATOS Spirit Brushless 52km/h High Speed RC Cars 1:16 Remote Control Monster Truck 4WD All Terrain Off-Road 2.4Ghz Shockproof Waterproof RTR Hobby Cars for Intermediate Hobbyist (1：16)

  • ...TRUCTURE】: Anti-corrosion, high strength, anti-impact PA material chassis and Reinforced Body Frame make the RC car not east to break. Aluminum alloy damping springs, widened suspension system and vacuum rubber tires, all-terrain adaptation, whether on rugged slopes or rough mountain roads are as usual.
  • 【UPGRADE DIGITAL SERVE】: 3-wire digital Servo, 1.8kg pull force, 300 pulses per second, compared with analog servo, digital servo provides higher accuracy and better fixed power, faster response, Softer and faster acceleration and deceleration. Digital servo provides higher precision and better fixed power and anti-shake function.
  • 【MORE PARAMETERS】: 2 speed mode, 4 wheel drive,2.4Ghz, 80-90m control distance, 7.2V, 60-70 mins charging time,15 mins max speed running time, 6 months free return guarantee.
Check Stock

2.4KG Micro Digital Servo Kit - High Torque 9g Metal Servo Waterproof Mini Steering Gear Standard Fast Speed Continuous Rotation for SCX24 RC Model & EMAX ES08MD II Standard 180 Degree

  • 2 Pack servo set : The EMAX ES08MD II digital servo's torque: 1.6kg/cm(4.8V ), 2.0kg/cm(6V), positioning speed(at no load): 0.12s / 60 degrees(4.8V), 0.1s/60 degrees(6.0V), maximum rotating angle: 180°.It can instantly generate high torque to make your RC car overtake in curve.
  • Wide application: Equipped with JR & Futaba universal plug, the 3 wire metal servo can be well adapted to Axial SCX24 SCX10 RC cars helicopters KT, fluttering, gliding, small robots, arduino experiments and other models.
  • Strong full metal gear: Waterproof servo motor is made of sturdy PVB plastic shell, strong steel metal gear and hard iron shaft.This powerful steering gear has passed the CE international safety test，which can withstand more than 1,000 impacts and increase your model's service life.
  • Stable performance: Compared with other steering gears, our upgraded high torque servo are equipped with high precision potentiometers and high-resolution digital chip, which can make your RC car respond quickly, enhance anti-interference ability, and quickly dissipate heat.
Check Stock

T best Digital Servo 1500μs/ 330hz 360 Continuous Rotation SPT5525LV-360 25KG Standard Digital Servo for RC Car Robot

  • ◆ DURABLE TO USE: Made of high quality metal material, this Digital Servo is quite durable in use..
  • ◆ MUCH ADVANCE: Digital Servo owns professional manufacturing, stable performance, high sensitivity, high reliability..
  • ◆ EASY TO USE: Simple to install and remove, RC Car Servo is convenient to use, and well suitable for robots..
  • ◆ IDEAL ITEM: Also can be a great replacement for the old or damaged one, making it more fashional and cool..
  • ◆ GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any....
Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

  • BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
  • EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
  • MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
  • WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check Stock

BETU 45Kg Coreless Servo Motor HV 8.4V, High Torque RC Digital Servo，Full Waterproof Servo, Stainless Steel Gear Servo with 25T Servo Horn（180°）

  • 【Metal Gear Coreless Servo】Equipped with strong copper & Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight..
  • 【Waterproof Servo】Waterproof performance: IP67 (Please watch the waterproof test video). Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Widely Use Digital Servo】The steering servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Speed Servo Standard Size】1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock